HP Q3948A User Manual - Page 80
Adjusting the copy quality, To adjust the copy quality for the current job
View all HP Q3948A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Adjusting the copy quality The factory-set default for copy quality is Text. This setting is the best for items that contain mostly text. When making a copy of a photo or graphic, you can select the Photo setting to increase the quality of your copy. Select the Mixed setting for documents that include both text and graphics. If you want to conserve toner, and the copy quality is not as important, select Draft. Note To adjust the copy quality for the current job 1. On the device control panel, press QUALITY to see the current quality setting for the copy. 2. Use the < or the > button to scroll through the quality setting options. 3. Select a setting, and then press START BLACK or START COLOR to save the selection and immediately start the copy job, or press ENTER to save the selection without starting the job. The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display. To adjust the default copy quality 1. On the device control panel, press MENU. 2. Use the < or the > button to select Copy setup, and then press ENTER. 3. Press ENTER to select Default Quality. 4. Use the < or the > button to scroll through the choices. 5. Press ENTER to save the selection. 64 Chapter 7 Copy ENWW