HP RP7 HP Retail Integrated Fingerprint Reader Installation Instructions HP L6 - Page 2

HP Retail Integrated Fingerprint Reader Installation Instructions HP RP7 Retail System Copyright © 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Printed in 691053-002 Installing Drivers for the Fingerprint Reader The drivers for the fingerprint reader are pre-loaded on the HP RP7 Retail System. You can also download the latest drivers from www.hp.com. Configuring the Fingerprint Reader To configure the fingerprint reader, refer to the HP Point of Sale Configuration Guide (available in English only). The guide is available on the HP factory image of the RP7 system's hard drive and at www.hp.com. To access the guide on the factory image: • In Windows Embedded POSReady 2009, select Start > All Programs > HP Point of Sale Information. • In Windows 7 or Windows Embedded POSReady 7, select Start > HP Point of Sale Information. NOTE: Refer to the HP RP7 Retail System Hardware Reference Guide at www.hp.com for detailed instructions on installing USB modules. CAUTION: This accessory is for use only with compatible UL Listed host products that have been evaluated for the operating altitude up to 3048m/10,000 feet. Use only with Listed ITE.