HP Scitex FB7600 TN Replacing the Printing Table - Page 9
ratchet adaptor to access the screws located on the back side of the motor.
View all HP Scitex FB7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
FB7x00 TN # emr_na-c04359603, Replacing the Printing Table 9. Disconnect the encoder convertor by opening the 3 Allen screws. Note: When removing the screws, be careful not to lose them - you work near the X magnet area. 10. Disconnect the 40 Allen screws from the X motor support/slider. You can use a long ratchet adaptor to access the screws located on the back side of the motor. Back side of the motor 9/17
FB7x00 TN # emr_na-c04359603, Replacing the Printing Table
9.
Disconnect the encoder convertor by opening the 3 Allen screws.
Note:
When removing the screws, be careful not to lose them – you work near the X
magnet area.
10.
Disconnect the 40 Allen screws from the X motor support/slider. You can use a long
ratchet adaptor to access the screws located on the back side of the motor.
Back side of the
motor
9/17