HP Special Edition L2005CM HP Special Edition L2000 Notebook PC and Compaq Pre - Page 126
that secure the LED, board to the top cover.
View all HP Special Edition L2005CM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Removal and Replacement Procedures 3. Release the ZIF connector 1 to which the LED board cable is connected and disconnect the cable 2 from the system board. 4. Remove the two PM2.0×5.0 screws 3 that secure the LED board to the top cover. 5. Remove the LED board 4. Removing the LED Board Screws Reverse the above procedure to install the LED board. 5-48 Maintenance and Service Guide
5–48
Maintenance and Service Guide
Removal and Replacement Procedures
3.
Release the ZIF connector
1
to which the LED board cable is
connected and disconnect the cable
2
from the system board.
4. Remove the two PM2.0×5.0 screws
3
that secure the LED
board to the top cover.
5. Remove the LED board
4
.
Removing the LED Board Screws
Reverse the above procedure to install the LED board.