HP StorageWorks 2/16N HP StorageWorks Fabric OS 5.X Procedures User Guide (AA- - Page 221
Con Extended Edge PID Format 2 on each switch. See
View all HP StorageWorks 2/16N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
4. Change the switch configuration in the fabric to Extended Edge PID format: a. Configure Extended Edge PID (Format 2) on each switch. (See "PID format changes" on page 224 for a sample configure command on an HP StorageWorks switch running Fabric OS 3.1.2 and for a sample configure command on an HP StorageWorks switch running Fabric OS 4.2.0 and later.) b. Run the switchEnable command all switches. c. Verify that all the switches form a fabric. d. Use the switchShow command to verify the ISLs are correct and the device links are correct. e. Use the fabricShow command to verify that the number of switches is the same as when you started this procedure. f. Use the nsAllShow command to verify the total number of devices is the same as when you started this procedure. g. For dual fabrics, repeat step 1 through step 4 for the other fabric. The following is an example of the configure command on a switch running Fabric OS 3.1.2: Configure... Fabric parameters (yes, y, no, n): [no] yes Domain: (1..239) [217] BB credit: (1..27) [16] R_A_TOV: (4000..120000) [10000] E_D_TOV: (1000..5000) [2000] Data field size: (256..2112) [2112] Sequence Level Switching: (0..1) [0] Disable Device Probing: (0..1) [0] Suppress Class F Traffic: (0..1) [0] SYNC IO mode: (0..10 [0] Switch PID Format : (0..2) [0] 2 Per-frame Route Priority: (0..1) [0] Long Distance Fabric: (0..1) [0] Virtual Channel parameters (yes, y, no, n): [no] ^D Committing configuration...done. 0x102fd500 (tshell): Apr 15 16:53:31 WARNING CONFIG-PIDCHANGE_DISPLACE, 3, Switch PID format changed to Extended Edge PID Format Fabric OS 5.x administrator guide 221