HP StorageWorks 2/32 Brocade Secure Fabric OS Administrator's Guide (53-100024 - Page 83

4 If you do not specify any operands, the command displays all policies in both the active and defined policy sets. For example, to display all policies in both active and defined policy sets: primaryfcs:admin> secpolicydump DEFINED POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs HTTP_POLICY IpAddr 192.155.52.0 ACTIVE POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs HTTP_POLICY IpAddr 192.155.52.0 192.155.53.1 192.155.54.2 192.155.55.3 Displaying Individual Secure Fabric OS Policies Use the secPolicyShow command to display information about one or more specified Secure Fabric OS policies. This command displays information with pagination. To display information about a specific Secure Fabric OS policy: 1. From a sectelnet or SSH session, log in to the primary FCS switch as admin. 2. Type secpolicyshow "listtype", "policy_name". listtype is the type of Secure Fabric OS policy set. It can be active, defined, or an asterisk (*), which displays both versions of the specified policy. policy_name is the name of the Secure Fabric OS policy. If you do not specify a policy name, the command displays all the policies in the specified policy set. If you do not specify any operands, the command displays all policies in both the active and defined policy sets. Secure Fabric OS Administrator's Guide 4-3 Publication Number: 53-1000244-01