HP StorageWorks 4/16 HP StorageWorks Fabric OS 6.1.0g release notes (5697-7861 - Page 12
SAN Director blade support
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HP StorageWorks 8/40 SAN Switch HP StorageWorks 8/80 SAN Switch Fabric Manager 6.1.0a 6.1.0a 5.2.0a 6.1.0g 6.1.0g 5.5 4/256 SAN Director blade support Fabric OS 6.1.x is fully qualified and supports the Director blades listed in Table 2. Table 2 4/256 SAN Director blade support matrix Director blade Number of blades FC4-16 FC4-32 FC4-48 FC8-16 FC8-32 FC8-48 FC10-6 Supported with any mix and up to eight of each. No restrictions around intermix. The 4/256 SAN Director must run Fabric OS 6.x or later to support the FC8-16 port blade and Fabric OS 6.1.0a or later to support the FC8-32 and FC8-48 port blades. FC4-16IP (iSCSI blade) Up to a maximum of four blades of this type. FR4-18i (FCIP/FC Router blade) Up to a maximum of two blades of this type. Up to eight FR4-18i blades can be installed if they are used only for FC Fastwrite or FCIP without routing. DC Director blade support Fabric OS 6.1.x is fully qualified and supports the blades for the DC Director blades listed in Table 3. Table 3 DC Director blade support matrix Director blade Number of blades FC8-16 FC8-32 FC8-48 FC10-6 Supported with Fabric OS 6.1.0a and later with any mix (up to eight of each). No restrictions around intermix. FC4-16IP (iSCSI blade) Not supported in the DC Director. FR4-18i (FCIP/FC Router blade) Supported with Fabric OS 6.1.0a and later, up to a maximum of four blades of this type. Up to eight FR4-18i blades can be installed if they are used only for FC Fastwrite or FCIP without routing. 12