HP StorageWorks 4/32 Brocade Converged Enhanced Ethernet Administrator's Guide - Page 111
Configuring LLDP interface-level command options, Clearing LLDP-related information
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
LLDP configuration and management 7 Configuring LLDP interface-level command options Only one LLDP profile can be assigned to an interface. If you do not use the lldp profile option at the interface level, the global configuration is used on the interface. If there are no global configuration values defined, the global default values are used. To configure LLDP interface-level command options, perform the following steps from Privileged EXEC mode. 1. Enter the interface command to specify the CEE interface type and slot/port number. Example of selecting the Ten Gigabit Ethernet port number 0/10. switch(config)#interface tengigabitethernet 0/10 2. Apply an LLDP profile to the interface. Example of applying the LLDP profile "network_standard" to the current interface. switch(conf-if-te-0/10)#lldp profile network_standard 3. Configure the FCoE priority bits for an interface. The value is specified as 0x0-0xff. Example switch(conf-if-te-0/10)#fcoe-priority-bits 0x0-0xff 4. Configure the DCBX version for an interface for CEE. For detailed information on these version command keywords, see "DCBX interaction with other vendor devices" on page 85. The default is to automatically detect the DCBX version. Example switch(conf-if-te-0/10)#lldp version cee 5. Enter the copy command to save the running-config file to the startup-config file. switch(conf-if-te-0/10)#exit switch(config)#end switch#copy running-config startup-config Clearing LLDP-related information To clear LLDP-related information, perform the following steps from Privileged EXEC mode. 1. Use the clear command to: • Clear LLDP neighbor information. switch#clear lldp neighbors tengigabitethernet 0/1 • Clear LLDP statistics. switch#clear lldp statistics tengigabitethernet 0/1 Displaying LLDP-related information To display LLDP-related information, perform the following steps from Privileged EXEC mode. 1. Use the show lldp neighbors command to: • Display LLDP general information. switch#show lldp Converged Enhanced Ethernet Administrator's Guide 91 53-1001346-01