HP StorageWorks 4/32 Brocade Fabric OS Command Reference Guide v6.0.0 (53-1000 - Page 241

firmwareDownload 2 Do you want to continue [Y]: y Diagnostics The command will check the network connection and other system parameters before initiating firmwareDownload. It may fail if at least one of the following conditions is encountered: • host cannot be reached by the switch. • user does not have permission on host. • The password for the user is not specified correctly. • Indicated firmware does not exist on the host, or is not in the right format, or is corrupted. • The FTP or SSH service is not running on host. • Platform is not supported by the firmware indicated. • USB device may not be plugged into the Active CP. • The USB device may not be enabled. Use the usbStorage command on the Active CP to enable the USB device. For other return codes, refer to the Fabric OS Error Message Reference Manual. See Also firmwareCommit, firmwareDownloadStatus, firmwareKeyShow, firmwareKeyUpdate, firmwareRestore, firmwareShow, reBoot, slotShow, version Fabric OS Command Reference 215 53-1000599-01