HP StorageWorks 4/32 Brocade Fabric OS Command Reference Manual - Supporting F - Page 159
diagModeShow, Synopsis, Description, Operands, Examples, See Also, burninLevel, setEsdMode
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
diagModeShow 2 diagModeShow Displays diagnostic mode configuration. Synopsis diagmodeshow Description Use this command to display the current settings for several diagnostic configuration parameters. This command is most often used by burn-in scripts to display a summary of the configuration settings that were in effect when the script was run. Any automated use of this command should rely only on the names of the specific variables, not on their exact positions in the output. Earlier versions of this command listed diag.mode.burnin.nExec instead of Burnin nExec and diag.mode.burnin.nExec instead of Burnin passnum. You can issue this command on the FR4-18i blade in a Brocade chassis; however, the command is not supported by the Brocade platform and does not effect any other feature operations. This availability is offered to maintain consistency across a mixed-blade environment. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands none Examples To display the diagnostic mode: switch:admin> diagmodeshow diag.mode* parameters saved in flash: diag.mode.burnin diag.mode.burnin.level diag.mode.burnin.firstPowerUp diag.mode.esd diag.mode.gbic diag.mode.splb diag.mode.lab diag.mode.mfg diag.mode.bplb diag.ports Burnin passnum Burnin nExec Brocade Mode Disable Modes Print = 0 = 0 = Thu Feb 28 01:36:12 2002 = 0 = 0 = 0 = 0 = 0 = 0 = TEST (type=INDEX, sz=512): 100. = 1 = 0 = OFF = OFF See Also burninLevel, setEsdMode, setGbicMode, setSplbMode Fabric OS Command Reference Manual 127 53-1000436-01