HP StorageWorks 4/32 Brocade OS Command Reference Manual Supporting Fabric OS - Page 718

2 zoneObjectRename zoneObjectRename Renames a zone object. Synopsis zoneObjectRename "objectName", "newName" Description Use this command to rename a zone object. You can use this command for all zone object types, including cfg, zone, and alias. A zone configuration name must begin with a letter that can be followed by any number of letters, numbers, and underscores. Names are case sensitive; for example, "Cfg_1" and "cfg_1" are different zone configurations. Spaces are ignored. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to nonvolatile memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. Notes Refer to the zoneCreate command for more information on name and member specifications. This command requires a Brocade Advanced Zoning license. When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following operands: "objectName" The name of the object that you want to rename. Quotation marks are optional. This operand is required. "newName" The new name of the object. Quotation marks are optional. This operand is required. Examples To create a configuration containing three zones: switch:admin> cfgshow "*" cfg: USA_cfg Red_zone; White_zone; Blue_zone switch:admin> zoneobjectrename "USA_cfg", "UK_cfg" switch:admin> cfgshow "*" cfg: UK_cfg Red_zone; White_zone; Blue_zone See Also cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow, zoneObjectCopy 692 Fabric OS Command Reference 53-1000599-01