HP StorageWorks 4/64 Brocade Fabric OS Command Reference Guide v6.0.0 (53-1000 - Page 115
TABLE 3, The Virtual Channel Settings are as follows
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
configure 2 BB Credit The buffer-to-buffer (BB) credit represents the number of buffers available to attached devices for frame receipt. The range of allowed values varies depending on other system settings (see Unicast-only Operation). Insistent Domain ID Mode When this mode is set, the switch attempts to acquire from the fabric the domain number programmed in its "Switch Fabric Settings", failing which the switch will segment from the fabric. Virtual Channel Settings The switch enables fine-tuning for a specific application by configuring the parameters for eight virtual channels. The first two virtual channels are reserved for switch internal functions and are not available for modification. The default virtual channel settings have already been optimized for switch performance. Changing the default values can improve switch performance but can also degrade performance. Do not change these settings without fully understanding the effects of the changes. The Virtual Channel Settings are as follows: TABLE 3 Configure Command Virtual Channel Settings Field Default Range VC Priority 2 2 2 to 3 VC Priority 3 2 2 to 3 VC Priority 4 2 VC Priority 5 2 2 to 3 2 to 3 VC Priority 6 3 VC Priority 7 3 2 to 3 2 to 3 VC Priority specifies the class of frame traffic given priority for a virtual channel. F_Port Login Parameters Specify the F_Port login parameters to limit the number of virtual port logins. These are switch-wide parameters applicable to all N_Port ID virtualization (NPIV) ports in the switch. The last two parameters are related to the staged F_Port bring up. Logins per second specifies the number of logins the switch will accept per second in staged F_port bring up. The Login stage interval parameter specifies the stage interval in staged F_port bring up. Unless there are issues with F_Port staging, leave default values. TABLE 4 F_Port Login Parameters (* = multiplication symbol) Field Type Default Range Maximum logins per switch Number 16 t* the max 1 to 126 * the number of ports max number of ports Maximum logins per port Number 126 1 to 255 Logins per second: Number 0 0 to 100 Login stage interval (milli-seconds): Number 0 0 to 10000 Fabric OS Command Reference 89 53-1000599-01