HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual - Supporting F - Page 293

fwFruCfg 2 fwFruCfg Displays or modifies FRU state alert configuration. Synopsis fwfrucfg [--show] Description Use this command to configure FRU states and actions. Based on these configuration settings, Fabric Watch generates action when an FRU state changes. To configure email alerts, use fwMailCfg. This command requires a Fabric Watch license. The command is not applicable to platforms without FRUs. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operand: --show Displays the current FRU configuration setting. If no operand is specified, the configuration prompt displays. Examples To change FRU state alert configuration: switch:admin> fwfrucfg The current FRU configuration: Alarm State Alarm Action Slot 0 1 Power Supply 0 0 Fan 0 0 WWN 0 0 Note that the value 0 for a parameter means that it is NOT used in the calculation Configurable Alarm States are: Absent-1, Inserted-2, On-4, Off-8, Faulty-16 Configurable Alarm Actions are: Errlog-1, E-mail-16 Slot Alarm State: (0..31) [0] 3 Slot Alarm Action: (0..17) [1] Power Supply Alarm State: (0..31) [0] Power Supply Alarm Action: (0..17) [0] Fan Alarm State: (0..31) [0] Fan Alarm Action: (0..17) [0] WWN Alarm State: (0..31) [0] WWN Alarm Action: (0..17) [0] Fru configuration successfully changed See Also fwConfigure, fwMailCfg Fabric OS Command Reference Manual 261 53-1000436-01