HP StorageWorks 4/64 Brocade Fabric OS Message Reference - Supporting Fabric O
HP StorageWorks 4/64 - SAN Switch Manual
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 4/64 manual content summary:
- HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 1
53-1000437-01 15 June 2007 Fabric OS Message Reference Supporting Fabric OS v5.3.0 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 2
http://www.brocade.com/support/oscd. Export of technical data contained in this document may require an export license from the United States Government. Brocade Communications Systems, Incorporated Corporate Headquarters Brocade Communications Systems, Inc. 1745 Technology Drive San Jose, CA - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 3
versions of the Brocade Fabric OS Message support March 2004 Fabric OS System Error Message 53-0000515-09 Updated for v4.4.0, Reference Manual First Manual 1001 Fabric OS System Error Message 53-1000046-01 Added BM, FCR, IPS, FCIP, SEC, and ZONE January 2006 Reference Manual messages - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 4
iv Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 5
8 Audit Event Messages 9 Message Severity Levels 11 Responding to a System Message 11 Looking Up a System Message 11 Gathering Information About the Problem 12 Support 12 Panic Dump and Core Dump Files 12 Trace Dumps 13 supportSave Command 13 Fabric OS Message Reference v 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 6
-1015 29 AG-1016 29 AG-1017 29 AG-1018 29 AUTH System Messages AUTH-1001 31 AUTH-1002 31 AUTH-1003 31 AUTH-1004 32 AUTH-1005 32 AUTH-1006 32 AUTH-1007 32 AUTH-1008 33 AUTH-1010 33 AUTH-1011 33 vi Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 7
Chapter 4 Chapter 5 AUTH-1012 34 AUTH-1013 34 AUTH-1014 34 AUTH-1016 34 AUTH-1017 35 AUTH-1018 35 AUTH-1020 35 AUTH-1022 36 AUTH-1023 36 AUTH-1025 37 AUTH-1026 37 AUTH-1027 37 AUTH-1028 38 AUTH-1029 38 AUTH-1030 38 AUTH-1031 39 AUTH-1032 39 AUTH-1033 39 AUTH-1034 40 AUTH-1035 40 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 8
Chapter 6 BL-1003 48 BL-1004 48 BL-1006 48 BL-1007 49 BL-1008 49 BL-1009 49 BL-1010 50 BL-1011 50 BL-1012 51 BL-1013 51 BL-1014 51 BL- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 9
BM-1004 62 BM-1005 62 BM-1006 62 BM-1007 63 BM-1008 63 BM-1009 63 BM-1054 63 BM-1055 64 BM-1056 64 BM-1058 64 Chapter 8 CDR System Messages CDR-1001 65 CDR-1002 65 CDR-1003 65 CDR-1004 66 Chapter 9 CER System Messages CER-1001 67 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 10
EM-1006 73 EM-1007 73 EM-1008 73 EM-1009 74 EM-1010 74 EM-1011 74 EM-1012 75 EM-1013 75 EM-1014 75 EM-1015 76 EM-1016 76 EM-1017 76 EM-1018 77 EM-1019 77 EM-1028 77 EM-1029 78 EM-1031 78 EM-1033 78 EM-1034 79 EM-1035 79 EM-1036 80 EM-1037 80 EM-1041 80 EM-1042 81 EM-1043 81 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 11
EM-1059 85 EM-1060 85 EM-1061 85 EM-1062 86 EM-1063 86 EM-1064 86 EM-1065 87 EM-1066 87 EM-2003 87 Chapter 12 EVMD System Messages EVMD-1001 89 Chapter 13 FABR System Messages FABR-1001 91 FABR-1002 91 FABR-1003 91 FABR-1004 92 FABR-1005 92 FABR-1006 92 FABR-1007 93 FABR-1008 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 12
104 FABS-1011 104 FABS-1012 104 FABS-1013 105 FABS-1014 105 FABS-1015 105 Chapter 15 FBC System Messages FBC-1001 107 Chapter 16 FCIP System Messages FCIP-1000 109 Chapter 17 FCMC System Messages FCMC-1001 111 Chapter 18 FCPD System Messages FCPD-1001 113 FCPD-1002 113 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 13
Chapter 20 FCR System Messages FCR-1001 117 FCR-1002 117 FCR-1003 117 FCR-1004 118 FCR-1005 118 FCR-1006 118 FCR-1007 118 FCR-1008 119 FCR-1009 119 FCR-1010 119 FCR-1011 119 FCR-1012 120 FCR-1013 120 FCR-1015 120 FCR-1016 120 FCR-1018 121 FCR-1019 121 FCR-1020 121 FCR-1021 122 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 14
FCR-1039 127 FCR-1040 127 FCR-1041 127 FCR-1042 128 FCR-1043 128 FCR-1048 128 FCR-1049 129 FCR-1053 129 FCR-1054 129 FCR-1055 130 FCR-1056 130 FCR-1057 130 FCR-1058 130 FCR-1059 131 FCR-1060 131 FCR-1061 131 FCR-1062 132 FCR-1063 132 FCR-1064 132 FCR-1065 132 FCR-1066 133 FCR- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 15
FICU-1005 140 FICU-1006 140 FICU-1007 141 FICU-1008 141 FICU-1009 141 FICU-1010 142 Chapter 22 FKLB System Messages FKLB-1001 143 Chapter 23 FLOD System Messages FLOD-1001 145 FLOD-1003 145 FLOD-1004 145 FLOD-1005 146 FLOD-1006 146 Chapter 24 FSPF System Messages FSPF-1001 147 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 16
Chapter 27 FW System Messages FW-1001 155 FW-1002 155 FW-1003 156 FW-1004 156 FW-1005 156 FW-1006 157 FW-1007 157 FW-1008 157 FW-1009 158 FW-1010 158 FW-1011 158 FW-1012 159 FW-1033 159 FW-1034 159 FW-1035 160 FW-1036 160 FW-1037 160 FW-1038 161 FW-1039 161 FW-1040 161 FW-1041 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 17
Fabric OS Message Reference 53-1000437-01 FW-1117 167 FW-1118 168 FW-1119 168 FW-1120 169 FW-1121 169 FW-1122 169 FW-1123 170 FW-1124 170 FW-1125 170 FW-1126 171 FW-1127 171 FW-1128 172 FW-1129 172 FW-1130 172 FW-1131 173 FW-1132 173 FW-1133 173 FW-1134 174 FW-1135 174 FW-1136 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 18
FW-1173 180 FW-1174 181 FW-1175 181 FW-1176 181 FW-1177 182 FW-1178 182 FW-1179 182 FW-1180 183 FW-1181 183 FW-1182 183 FW-1183 184 FW-1184 184 FW-1185 184 FW-1186 185 FW-1187 185 FW-1188 185 FW-1189 186 FW-1190 186 FW-1191 186 FW-1192 187 FW-1193 187 FW-1194 187 FW-1195 188 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 19
Fabric OS Message Reference 53-1000437-01 FW-1250 193 FW-1251 193 FW-1272 194 FW-1273 194 FW-1274 194 FW-1275 195 FW-1296 195 FW-1297 195 FW-1298 196 FW-1299 196 FW-1300 196 FW-1301 197 FW-1302 197 FW-1303 197 FW-1304 198 FW-1305 198 FW-1306 198 FW-1307 199 FW-1308 199 FW-1309 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 20
FW-1327 205 FW-1328 206 FW-1329 206 FW-1330 206 FW-1331 207 FW-1332 207 FW-1333 207 FW-1334 208 FW-1335 208 FW-1336 208 FW-1337 209 FW-1338 209 FW-1339 210 FW-1340 210 FW-1341 210 FW-1342 211 FW-1343 211 FW-1344 211 FW-1345 212 FW-1346 212 FW-1347 213 FW-1348 213 FW-1349 214 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 21
Fabric OS Message Reference 53-1000437-01 FW-1364 220 FW-1365 220 FW-1366 220 FW-1367 221 FW-1368 221 FW-1369 221 FW-1370 222 FW-1371 222 FW-1372 222 FW-1373 223 FW-1374 223 FW-1375 223 FW-1376 224 FW-1377 224 FW-1378 224 FW-1379 225 FW-1400 225 FW-1401 225 FW-1402 226 FW-1403 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 22
FW-1441 232 FW-1442 232 FW-1443 232 FW-1444 233 FW-1445 233 FW-1446 233 FW-1500 234 FW-1501 234 Chapter 28 HAM System Messages HAM-1001 235 HAM-1002 235 HAM-1004 235 HAM-1005 236 HAM-1006 236 Chapter 29 HAMK System Messages HAMK-1001 239 HAMK-1002 239 HAMK-1003 239 HAMK-1004 240 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 23
252 HIL-1510 252 HIL-1601 253 HIL-1602 253 Chapter 31 HLO System Messages HLO-1001 255 HLO-1002 255 HLO-1003 255 Chapter 32 HMON System Messages HMON-1001 257 Chapter 33 HTTP System Messages HTTP-1001 259 Fabric OS Message Reference xxiii 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 24
-1007 266 ICPD-1008 267 Chapter 37 IPAD System Messages IPAD-1000 269 IPAD-1001 269 Chapter 38 IPS System Messages IPS-1001 271 IPS-1002 271 IPS-1003 271 IPS-1004 271 IPS-1005 272 IPS-1006 272 Chapter 39 ISCS System Messages ISCS-1000 273 Chapter 40 ISNS System Messages ISNS-1001 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 25
ISNS-1003 275 ISNS-1004 276 ISNS-1005 276 ISNS-1006 276 ISNS-1008 277 ISNS-1009 277 ISNS-1010 277 ISNS-1011 277 ISNS-1013 278 ISNS-1014 278 Chapter 41 KSWD System Messages KSWD-1003 279 Chapter 42 KTRC System Messages KTRC-1001 281 KTRC-1002 281 KTRC-1003 281 KTRC-1004 281 KTRC- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 26
Chapter 46 MPTH System Messages MPTH-1001 289 MPTH-1002 289 MPTH-1003 289 Chapter 47 MQ System Messages MQ-1004 291 Chapter 48 MS System Messages MS-1001 293 MS-1002 293 MS-1003 294 MS-1004 294 MS-1005 295 MS-1006 295 MS-1008 295 MS- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 27
PDM-1005 304 PDM-1006 304 PDM-1007 304 PDM-1008 305 PDM-1009 305 PDM-1010 305 PDM-1011 306 PDM-1012 306 PDM-1013 306 PDM-1014 306 PDM-1017 307 PDM-1019 307 PDM-1020 307 PDM-1021 307 PDM-1022 308 PDM-1023 308 PDM-1024 308 Chapter 52 PDTR System Messages PDTR-1001 311 PDTR-1002 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 28
Chapter 56 PSWP System Messages PSWP-1001 319 PSWP-1002 319 PSWP-1003 319 Chapter 57 RAS System Messages RAS-1001 321 RAS-1002 321 RAS-1003 321 RAS-1004 322 RAS-1005 322 Chapter 58 RCS System Messages RCS-1001 323 RCS-1002 323 RCS-1003 323 RCS-1004 324 RCS-1005 324 RCS-1006 325 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 29
Chapter 62 SCN System Messages SCN-1001 333 Chapter 63 SEC System Messages SEC-1001 335 SEC-1002 335 SEC-1003 336 SEC-1005 336 SEC-1006 336 SEC-1007 337 SEC-1008 337 SEC-1009 337 SEC-1016 338 SEC-1022 338 SEC-1024 338 SEC-1025 339 SEC-1026 339 SEC-1028 339 SEC-1029 340 SEC-1030 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 30
SEC-1051 346 SEC-1052 346 SEC-1053 346 SEC-1054 347 SEC-1055 347 SEC-1056 347 SEC-1057 348 SEC-1059 348 SEC-1062 348 SEC-1063 349 SEC-1064 349 SEC-1065 349 SEC-1069 349 SEC-1071 350 SEC-1072 350 SEC-1073 350 SEC-1074 351 SEC-1075 351 SEC-1076 351 SEC-1077 352 SEC-1078 352 SEC- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 31
Fabric OS Message Reference 53-1000437-01 SEC-1095 358 SEC-1096 358 SEC-1097 358 SEC-1098 359 SEC-1099 359 SEC-1100 359 SEC-1101 360 SEC-1102 360 SEC-1104 360 SEC-1105 361 SEC-1106 361 SEC-1107 361 SEC-1108 362 SEC-1110 362 SEC-1111 362 SEC-1112 363 SEC-1115 363 SEC-1116 363 SEC- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 32
SEC-1155 370 SEC-1156 370 SEC-1157 370 SEC-1158 371 SEC-1159 371 SEC-1160 371 SEC-1163 372 SEC-1164 372 SEC-1165 372 SEC-1166 373 SEC-1167 373 SEC-1168 373 SEC-1170 374 SEC-1171 374 SEC-1172 374 SEC-1173 375 SEC-1174 375 SEC-1175 375 SEC-1176 375 SEC-1180 376 SEC-1181 376 SEC- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 33
Fabric OS Message Reference 53-1000437-01 SEC-1198 381 SEC-1199 382 SEC-1200 382 SEC-1201 382 SEC-1202 383 SEC-1203 383 SEC-1250 383 SEC-1251 384 SEC-1253 384 SEC-1300 384 SEC-1301 385 SEC-1302 385 SEC-1303 385 SEC-1304 386 SEC-1305 386 SEC-1306 386 SEC-1307 387 SEC-1308 387 SEC- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 34
SEC-1328 393 SEC-1329 393 SEC-1330 393 SEC-1331 394 Chapter 64 SNMP System Messages SNMP-1001 395 SNMP-1002 395 SNMP-1003 395 SNMP-1004 396 SNMP-1005 396 SNMP-1006 396 Chapter 65 SS System - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 35
SULB-1031 410 SULB-1033 410 SULB-1034 411 SULB-1035 411 SULB-1036 411 SULB-1037 411 Chapter 67 SWCH System Messages SWCH-1001 413 SWCH-1002 413 SWCH-1003 413 SWCH-1004 414 SWCH-1005 414 SWCH-1006 414 SWCH-1007 415 SWCH-1008 415 Chapter 68 SYSC System Messages SYSC-1001 417 SYSC- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 36
TRCE-1005 422 TRCE-1006 423 TRCE-1007 423 TRCE-1008 423 TRCE-1009 424 TRCE-1010 424 TRCE-1011 424 TRCE-1012 425 Chapter 71 TRCK System Messages TRCK-1001 427 TRCK-1002 427 TRCK-1003 427 TRCK-1004 428 TRCK-1005 428 TRCK-1006 428 Chapter 72 TS System Messages TS-1001 429 TS-1002 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 37
WEBD-1006 438 WEBD-1007 438 WEBD-1008 439 Chapter 76 ZOLB System Messages ZOLB-1001 441 Chapter 77 ZONE System Messages ZONE-1002 443 ZONE-1003 443 ZONE-1004 444 ZONE-1005 444 ZONE-1006 445 ZONE-1007 445 ZONE-1008 445 ZONE-1010 446 ZONE-1012 446 ZONE-1013 446 ZONE-1014 447 ZONE- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 38
xxxviii ZONE-1037 454 ZONE-1038 454 ZONE-1039 454 ZONE-1040 455 ZONE-1041 455 ZONE-1042 455 ZONE-1043 455 ZONE-1044 456 ZONE-1045 456 ZONE-1046 456 Chapter 78 AUDIT AUTH System Messages AUTH-3001 457 AUTH-3002 457 AUTH-3003 457 AUTH-3004 458 AUTH-3005 458 AUTH-3006 458 AUTH-3007 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 39
SEC-3008 467 SEC-3009 468 SEC-3010 468 SEC-3011 468 SEC-3012 469 SEC-3013 469 SEC-3014 469 SEC-3015 470 SEC-3016 470 SEC-3017 470 SEC-3018 471 SEC-3019 471 SEC-3020 471 SEC-3021 472 SEC-3022 472 SEC-3023 472 SEC-3024 473 SEC-3025 473 SEC-3026 473 SEC-3027 474 SEC-3028 474 SEC- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 40
Chapter 83 AUDIT SULB System Messages SULB-1001 481 SULB-1002 481 SULB-1003 481 SULB-1009 482 SULB-1010 488 SULB-1017 488 SULB-1018 488 SULB-1020 488 SULB-1021 489 SULB-1023 489 SULB-1024 489 SULB-1026 490 SULB-1030 490 SULB-1031 490 SULB-1033 491 SULB-1034 491 SULB-1035 491 SULB- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 41
ZONE-3017 498 ZONE-3018 499 ZONE-3019 499 ZONE-3020 499 ZONE-3021 500 ZONE-3022 500 ZONE-3023 500 ZONE-3024 501 ZONE-3025 501 Fabric OS Message Reference xli 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 42
xlii Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 43
Fabric OS v5.2.0 to 5.3.0, supporting the following platforms: • Brocade 200E, 4012, 4016, 4018, 4020, 4024 switches • Brocade 3250 switch • Brocade 3850 switch • Brocade 3900 switch • Brocade 4100, 4900, 5000, 7500, AP 7600 switches • Brocade 24000 director Fabric OS Message Reference xlvii 53 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 44
• Brocade 48000 director • FA4-16 blade • FC10-6 blade In those instances in which procedures or parts of procedures documented here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 45
guide , this manual specifically notes hardware, firmware, software, (SAN)- Brocade and industry-specific documentation that you might find helpful. BROCADE RESOURCES The following related documentation is provided on the Brocade Documentation CD-ROM and on the Brocade Web site, through Brocade - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 46
Fabrics Supports the reliable, high-speed connectivity of Brocade switches over dark fiber or dense wave division multiplexing (DWDM) equipment at distances up to 500 kilometers to enhance business continuance operations. Fabric Watch Continuously monitors SAN fabrics for potential faults based - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 47
Service enables Fibre Channel frames to "tunnel" through IP networks by dividing frames, encapsulating the result in IP packets on entering the tunnel, and then reconstructing them as they leave the tunnel. Fabric OS supports eight FCIP interswitch links between two Brocade switches (Brocade - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 48
4012, 4016, 4018, 4020, and 4024 switches: nonport side of chassis. - Brocade 3250, 3850, and 3900 switches: Bottom of chassis. - Brocade 4100, 4900, 5000, 7500, and AP7600 switches: on the pullout tab on the front of the switch. - Brocade 24000, and 48000 directors: Inside the front of the chassis - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 49
guide supports Fabric OS v5.3.0 and documents system messages that can help you diagnose and fix problems with a switch or fabric. The messages are organized first by event type, reliability, availability, and serviceability are saved to nonvolatile storage by default. • The system error message log - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 50
. The sequence number is persistent across power cycles and switch reboots. • By default, the errDump and errShow commands display support post-event audtis and problem determination based on high-frequency events of certain types such as security violations, zoning configuration changes, firmware - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 51
running UNIX, Linux, or any other operating system that supports the standard syslogd functionality. Configuring for syslogd involves configuring the host, enabling syslogd on the Brocade model, and, optionally, setting the facility level. For the Brocade 24000 and 48000, each CP has a unique error - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 52
. When the log is full, the newest log entries overwrite the oldest log entries. Port logs capture switch-to-device, device-to-switch, switch-to-switch, some device A-to-device B, and control information. Port logs are not persistent and are lost over power cycles and reboots. Run the portLogShow - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 53
Resets the SNMP recipients to default values. agtCfgSet Modifies the SNMP POST (Power-On Self-Test) configuration. errClear Clears all error log messages for all switch instances on Fabric OS. supportFtp Sets, clears, or displays support FTP parameters or a time interval to check the FTP - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 54
switch service provider to diagnose and correct problems with the switch. The output from this command is very long. syslogDIpAdd Adds an IP is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 contain FR4-18i and FA4-18 blades respectively. traceDump Displays, - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 55
speed. Type to continue, Q to stop: CLEARING THE SYSTEM MESSAGE LOG To clear the system message log for a particular switch instance: 1. Log in to the switch as admin. 2. Use the errClear command to clear all messages from memory. NOTE For products that have a single processor, all error - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 56
. 1-ZONE 2-SECURITY 3-CONFIGURATION 4-FIRMWARE 5-FABRIC 3. Enable the audit switch to point to the configured servers' IP addresses. Dazzler3850:admin> syslogdipadd 10.128.128.160 6. Verify the switch the switch. The RASLog subsystem will support an internationalized timestamp format base on - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 57
command. The sequence number is persistent across power cycles and switch reboots. For most messages, this field problem determination. Audit event message format: AUDIT, , [], , , ////. / - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 58
on the switch. The RASLog subsystem will support an internationalized timestamp format base on cause and actions recommended in this manual. Note that not all message numbers Firmware Fabric User ID Identifies the user ID. Role Identifies the role of the user ID. IP Address Identifies the IP - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 59
to be used as general guidelines for troubleshooting. For all cases, you should look at longer operating in redundant mode unless the failed power supply is replaced or fixed. Info-level messages Message 11 • Gathering Information About the Problem 12 • Support 12 • Panic Dump and Core Dump - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 60
5. Run the errDump command on each logical switch. 6. Run supportFtp (as needed) to set Brocade 12000, 24000, or 48000) 13. What and when were the last actions or changes made to the system? SUPPORT Fabric OS create a number of files that can help support personnel troubleshoot and diagnose a problem - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 61
with the exception of the Fabric Watch daemon and the IP storage demon, which ping the SWD every 333 seconds. for support personnel use only. TRACE DUMPS The Fabric OS produces trace dumps when problems output of the supportShow command to an off-switch storage location via FTP. Prior to running - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 62
hardware platforms. Blade management error messages are a result of autoleveling firmware upgrades performed by the control processor (CP). Condor application specific integrated circuit (ASIC) driver error messages. This is the core edge routing module on the Brocade director platforms. Status - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 63
of the switch nondisruptively during failures and software upgrades. These service. A component is a module in the Fabric OS, implementing a related set of functionality. A service BP. System messages generated by the IP admin demon. Fibre Channel over IP license, tunneling, and port related messages - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 64
(agd) • Alias Server (asd) • ARR daemon (arrd) • Authentication daemon (authd) • Blade Manager (bmd) • Common Access Layer (cald) • Diagnostics daemon (diagd) • Environment Monitor (emd) • EVM daemon (evmd) • Exchange Service Support daemon (essd) • FA-API rpc daemon (rpcd) • Fabric daemon (fabricd - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 65
an "unreachable" message to the caller, allowing the caller to take the appropriate action. If a switch is not responding, RTWR retries 100 times. Storage application services supporting director-class storage virtualization platform. The internal state change notification daemon is used for state - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 66
station. Brocade switches support six management entities that can be configured to receive these traps. The supportSave command generates these error messages if problems are encountered. The software upgrade library provides firmwareDownload command capability, which enables firmware upgrades to - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 67
RASLog Messages This section provides the RASLog messages, including: • AG System Messages 25 • AUTH System Messages 31 • BKSW System Messages 45 • BL System Messages 47 • BLL System Messages 59 • BM System Messages 61 • CDR System Messages 65 • CER System Messages 67 • CONF System Messages - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 68
• IBPD System Messages 263 • ICPD System Messages 265 • IPAD System Messages 269 • IPS System Messages 271 • ISCS System Messages 273 • ISNS System Messages 275 • KSWD System Messages 279 • KTRC System Messages 281 • LOG System Messages 283 • LSDB System - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 69
• UPTH System Messages 435 • WEBD System Messages 437 • ZOLB System Messages 441 • ZONE System Messages 443 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 70
- HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 71
Audit Log Messages This section provides the Audit messages, including: • AUDIT AUTH System Messages 457 • AUDIT CONF System Messages 461 • AUDIT HTTP System Messages 463 • AUDIT SEC System Messages 465 • AUDIT SNMP System Messages 479 • AUDIT SULB System Messages 481 • AUDIT ZONE System - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 72
- HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 73
Action • On Brocade, Fabric OS based switches execute the portCfgNpivPort command on the fabric switch to enable NPIV capability on the port connected to the Access Gateway. Refer to the Fabric OS Command Reference manual for more information on this command. • Some blades within a switch or some - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 74
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AG-1005 Message , [AG-1005], ,, WARNING, , FDISC response was dropped because F_Port - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 75
the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1009 Message , [AG-1009], ,, WARNING, , Sending FLOGI failed on N_Port - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 76
the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1013 Message , [AG-1013], ,, INFO, , F_Ports mapped to N_Port failed - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 77
the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1016 Message , [AG-1016], ,, INFO, , Failing over F_Ports mapped to N_Port - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 78
2 AG-1018 Recommended Run switchShow to display the status of all ports in the system. Run portCfgShow to display a list of Action ports currently configured as N_Port(s). Ensure that the host is connected to an F_port. Severity ERROR 30 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 79
Retry the secAuthSecret command. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1003 Message , [AUTH-1003], ,, INFO, , type has been - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 80
firmware. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service not supported: port . Indicates that the proposed authentication protocol type or types are not supported by the local specified port. 32 Fabric - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 81
sure the local switch supports the specified protocols: problem with the Secure Fabric OS. Recommended Action Reboot or power cycle the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 82
support authentication. Recommended Make sure the entity at the other end of the link supports Recommended Action Usually this problem is transient. The authentication ; then run the supportSave command and contact your switch service provider. Severity WARNING AUTH-1014 Message , - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 83
your Action switch service provider. Severity ERROR AUTH-1017 Message , [AUTH-1017], ,, ERROR, , Invalid value to start authentication request: port , operation code . Probable Cause Indicates an internal problem with the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 84
set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO AUTH-1022 Message , [AUTH-1022], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 85
run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1026 Message Recommended Action Usually this problem is transient. If switch does not support the specified authentication value. Recommended Check the authentication configuration and reset the supported - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 86
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1028 Message , [AUTH-1028], < failed to get memory. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 87
prevent replay attacks. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1033 Message , [AUTH-1033], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 88
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1035 Message , [AUTH-1035], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 89
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1037 Message , [AUTH-1037], ,, ERROR, , Failed to response for - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 90
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1042 Message Probable Cause , [AUTH-1042], ,, ERROR, , Port has - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 91
your switch service provider. defaulted to OFF, and switch will not participate in Diffie Hellman - challenge handshake authentication protocol (DH-CHAP) authentication with devices. Recommended Try setting the device authentication policy manually a result. This problem may be transient due - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 92
3 AUTH-1044 44 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 93
is found, run supportFtp to send all core files to a secure server location. Copy the error message and any core file information, and contact your switch service provider. Severity WARNING Fabric OS Message Reference 45 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 94
4 BKSW-1003 46 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 95
correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Note that any reference seen to slot 0 is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 96
Recommended Action Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 97
. Recommended Action Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 98
to verify that the blade or switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. On a bladed switch, run the slotPowerOff and slotPowerOn commands. On a nonbladed switch, reboot or power cycle the switch. If the message persists - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 99
pluggable (SFP), or device attached to the specified port. On a bladed switch, run the slotPowerOff and slotPowerOn commands. On a nonbladed switch, reboot or power cycle the switch. If the message persists, replace the blade. Severity ERROR BL-1014 Message Probable Cause , [BL-1014 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 100
. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If there is a hardware error, if the slotPowerOff or slotPowerOn fails on the bladed switch or if errors are encountered again: • On the Brocade, 24000, and 48000, replace the blade field-replaceable unit (FRU). • On the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 101
5 Recommended Action Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 102
application-specific integrated circuit (ASIC) chips. Recommended Action Reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 103
firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all GigE/Fibre Channel over IP warm recovery of the switch.The switch will reboot and start a cold recovery. Fabric - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 104
power cycle the switch. If the message persists, replace the switch. Severity CRITICAL BL-1029 Message , [BL-1029], ,, INFO, , All ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 105
be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all the GigE/Fibre Channel over IP (FCIP)/Virtualization data elements / FC - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 106
the user ports after disabling the ports. Recommended Action Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If the message persists, replace - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 107
• 14 = Interrupt suspended • 15 = Filter LISTD error • 16 = Unknown filter LIST error • 17 = Wait for LPC open blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 108
6 BLL-1000 If the message persists, replace the blade. Severity CRITICAL 60 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 109
. This can be due to one of the following: • The CP blade is running a later version than the AP blade. • The CP blade is running a much older version than the AP blade. Recommended Action The problem can be corrected by changing the firmware version on either the control processor (CP) or on the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 110
commands or reseat the affected blade. On the Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1004 Message , [BM-1004], ,, INFO, , Blade firmware on slot < Slot > is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 111
or reseat the affected blade. On the Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1054 Message Probable Cause , [BM-1054], ,, INFO, , AP firmware is not consistent - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 112
failed. Recommended Use the slotPoweroff and slotPoweron commands or reseat the affected blade. On the Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1056 Message , [BM-1056], ,, INFO, - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 113
a bladed system, issue the slotPowerOff and slotPowerOn commands on the blade to recover Action the system. For a non-bladed system, perform fastBoot on the switch to at the next maintenance window. If the problem Action persists, replace the blade. Fabric OS Message Reference 65 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 114
specific integrated circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error occurs, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR 66 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 115
loaded on the standby CP. The standby CP does not support the Advanced Performance Tuning module when the fibre connectivity (FICON) Management Server is enabled. Recommended Action Run the firmwareDownload command to upgrade the firmware on the standby CP. You can also disable FMS on the active - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 116
9 CER-1001 68 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 117
Chapter CONF System Messages 10 CONF-1000 Message , [CONF-1000], , AUDIT, INFO, , configDownload completed successfully. . Probable Cause Indicates that the configDownload operation was initiated and completed - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 118
more parameters that require the switch to be disabled. Recommended Disable the switch and try to download configuration again. Action Severity INFO CONF-1030 Message , [CONF-1030], ,, WARNING, , Configuration database full, data not committed (key: - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 119
faulted. Probable Cause Indicates that a field-replaceable unit (FRU) header could not be read or is not valid. The FRU is faulted. Recommended Action On Brocade 24000 and 48000, try reseating the specified FRU. Reboot or power cycle the switch. Fabric OS Message Reference 71 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 120
an optional number to identify the unit, slot, or port. The Brocade 3250 has one power supply and three fans, and the Brocade 3850 has two power supplies and four fans. Values for the individual fans and power supplies for these switches might display, but these parts cannot be replaced: the entire - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 121
Recommended Action There is most likely a voltage hardware problem on the blade or motherboard of the switch. For the Brocade 24000 and 48000, replace the blade field-replaceable unit (FRU). For the Brocade 3900 replace the motherboard FRU. For the Brocade 200E, 3016, 3250, 3850, 4012, 4016, 4018 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 122
Try reseating the FRU. If the message persists, replace the FRU. Refer to the Brocade 48000 Hardware Reference Manual for more information about chassisConfig modes and supported blades. Severity CRITICAL EM-1010 Message , [EM-1010], , FFDC, CRITICAL, - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 123
are serious internal Fabric OS configuration or hardware problems on the switch. Recommended Action On Brocade 24000 and 48000, try reseating the indicated field-replaceable unit (FRU). If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 124
Recommended Monitor the switch. If the problem persists, a reBoot or power cycle is required to resolve the Action problem. Severity WARNING EM FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING EM-1017 Message , [EM-1017 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 125
processor (CP) blade is operational and not supported by the firmware on command, or upgrade the Action firmware on the only. This is a serious hardware problem. The FRU ID value is power cycle the switch. If the message still persists, replace the WWN card, or the switch (for nonbladed switches - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 126
is being retried. Probable Cause Indicates that the I2C bus had problems and a timeout occurred. Recommended Action This is often a 48 port blade) if the field-replaceable unit (FRU) is intended for use. Refer to the appropriate hardware manual for instructions on inserting the switch blades - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 127
problems. Refer to the Fabric OS Command Reference for more information on this command. If the message persists, replace the FRU. Severity ERROR EM-1035 Message , [EM-1035], ,, ERROR, , 2 circuit paired Power Supplies are faulty, please check the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 128
-wide name (WWN) card, then default WWN and IP addresses are used for the switch. Recommended Action Reseat the FRU card. If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric OS - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 129
responding to commands and should be replaced. Action Severity WARNING EM-1044 Message , [EM-1044], ,, WARNING, , Can't power on , its logical switch is shut down Probable Cause Indicates that the specified field-replaceable unit (FRU) cannot be - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 130
is indicating a predicted failure. If new_state is Down (not enough power), a newly inserted port blade was not powered on because there was not enough power available. Recommended The Brocade 24000 requires only a single power supply for a fully populated chassis; however, you Action should always - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 131
access to the field-replaceable unit (FRU) has become available again. Recommended The EM-1029 error can be a transitory error; if the problem resolves, the EM-1048 message is Action displayed. Severity INFO EM-1049 Message , [EM-1049], ,, INFO, , FRU - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 132
, move it to a port that can support the heat generated. Severity WARNING EM-1056 Message This message is valid for only the Brocade 4100, 4900, 5000, 7500, switch does not reach the reset threshold for the switch/blade. If the reset threshold is reached on the switch/blade, the switch/blade - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 133
the switch does not reach the reset threshold for the switch/blade. If the reset threshold is reached on the switch/blade, the switch/blade will Remove all blades of type or upgrade your standby CP, then reboot or run haSyncStart. A blade in the system is not supported by the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 134
Fault reason>. Probable Cause The blade is power off since a hardware (HW) application specific integrated circuit (ASIC) ERROR was detected, and the user has selected to power off the problem blade when such a condition occurred. Recommended Contact support. Action Severity CRITICAL 86 Fabric - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 135
version of either the control processor firmware (CFOS) or the blade processor firmware (BFOS) is not compatible with the Storage Application Services (SAS) or other application firmware version(s). Recommended Upgrade the FOS firmware or the SAS firmware with the firmwareDownload command. Refer to - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 136
11 EM-2003 88 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 137
id.> Probable Cause The event could not be sent to the remote proxy because the remote proxy switch cannot be reached through in-band. Recommended Please make sure that the specified remote domain is present in the fabric. Action Severity WARNING Fabric OS - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 138
12 EVMD-1001 90 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 139
Cause Indicates that an internal link service (ILS) information unit of invalid size has been received. The neighbor switch has sent an invalid sized payload. Recommended Action Investigate the neighbor switch for problems. Run the errShow command on the neighbor switch to view the error log for - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 140
FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1004 Message , [FABR-1004 incoming data, the system will discard the frame. If it is due to problems with the kernel, the system will recover by performing a failover. If the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 141
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1007 Message , [FABR-1007], information unit. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action In case of severe - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 142
message is rare and usually indicates a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FABR-1011 Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 143
usually indicates a problem with the Fabric OS. Recommended Action The system will recover by failing over to the standby CP. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 144
>, [FABR-1016], ,, WARNING, , ficonMode is enabled. Probable Cause Indicates that FICON mode is enabled on the switch through a user interface command. Recommended No action is required. Action Severity WARNING FABR-1017 Message , [FABR-1017], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 145
domains>) exceeds supported configuration (). Probable Cause Indicates that this switch is a value-line switch and has be changed to within the licensed limit. Contact your switch provider to obtain a full fabric license. Severity CRITICAL FABR-1021 Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 146
changed to within the licensed limit. Contact your switch provider to obtain a full fabric license. Severity CRITICAL FABR-1023 Message , [FABR-1023], ,, INFO, , Fabric size is within supported configuration (). Fabric limit timer ( - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 147
. In both of the previous modes, the buffer credits are fixed, based on the port configuration information. In this mode, the buffer credits are that fabric exhausted the maximum number of retries sending internal link service (ILS) to the iswitchd demon on the specified E_port. Recommended - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 148
>running an unsupported FOS version v2.x has joined the fabric. Probable Cause Indicates that a switch with an unsupported Fabric OS version 2.x has joined the fabric. Recommended Remove the switch with the unsupported Fabric OS version 2.x from the fabric. Action 100 Fabric OS Message Reference - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 149
by the software. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1004 Message , [FABS-1004], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 150
which could be any whole number. Recommended Action Reboot or power cycle the active CP (for modular systems) or the switch (for single-board systems). If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1006 Message , [FABS-1006 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 151
object's status field. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1008 Message , [FABS-1008], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 152
an unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1011 Message , [FABS-1011], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 153
enabled. This is usually an internal Fabric OS problem. Recommended Action Try removing and reinserting the FRU. Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR Fabric OS Message Reference 105 53-1000437 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 154
14 FABS-1015 106 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 155
Action The problem can be corrected by changing the version of firmware on the CP or AP blades. The firmware version on the CP blade can be changed using the firmwareDownload command. Refer to the release notes to determine whether a non-disruptive firmwareDownload is supported between the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 156
15 FBC-1001 108 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 157
Chapter FCIP System Messages 16 FCIP-1000 Message , [FCIP-1000], , FFDC, ERROR, , of GE failed. Please retry the command. Data: inst=< - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 158
16 FCIP-1000 110 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 159
is low on memory and failed to allocate new memory for an information unit (IU). Recommended A nonbladed switch will automatically reboot. For a bladed switch, the active CP blade will Action automatically fail over and the standby CP will become the active CP. Severity CRITICAL Fabric OS Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 160
17 FCMC-1001 112 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 161
with the device vendor for a firmware upgrade containing a defect fix. Severity switch port login (PLOGI) during probing. Recommended Action The Brocade 4100, 4900, 5000, 7500, and AP 7600 do not support private loop devices. Refer to the switch vendor for a list of other port types that support - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 162
18 FCPD-1003 114 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 163
function call is "kmalloc_wrapper failed". This function call is for kernel memory allocation. Recommended A nonbladed switch will automatically reboot. For a bladed switch, the active CP blade will Action automatically fail over, and the standby CP will become the active CP. Severity CRITICAL - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 164
19 FCPH-1001 116 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 165
Chapter FCR System Messages 20 FCR-1001 Message , [FCR-1001], ,, INFO, , FC router proxy device in edge created at port . Probable Cause Indicates that a proxy device in the edge fabric has been imported at the specified port. Recommended - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 166
20 FCR-1004 FCR-1004 Message , [FCR-1004], ,, INFO, , FC router physical devices offline at port . Probable Cause Indicates that one or more physical devices connected to the specified port have gone offline. Recommended Action Verify that - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 167
20 FCR-1008 Severity INFO FCR-1008 Message , [FCR-1008], ,, INFO, , FC router LSAN zone created at port . Probable Cause Indicates that a logical storage area network (LSAN) zone was created at the specified port in the edge fabric. - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 168
id fabric ID . Indicates that a fabric is no longer accessible through the backbone fabric. This may be caused by a link or switch failure. 120 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 169
device port resources. Use the fcrProxyDevShow command to view how many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as zoneShow, zoneRemove, zoneDelete, cfgDelete, and cfgDisable in the edge fabric. Proxy devices - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 170
20 FCR-1021 To do that, perform the following steps: 1. Run portDisable to disable all the EX_Ports that got this error message. 2. Run portDisable to disable all the other EX_Ports on that FCR connected to the same edge fabrics the EX_ports disabled in step 1 are connected to. 3. Use Zoning - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 171
be in use are reused as needed. Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics, or there are highly dynamic - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 172
in use will be reused as needed. Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics, or there are highly dynamic - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 173
20 FCR-1030 To avoid WWN conflicts, all EX_Ports attached to fabrics with highly dynamic changes to EX_Port connectivity should be disabled then reenabled. Severity INFO FCR-1030 Message , [FCR-1030], ,, INFO, , Physical device came online at - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 174
20 FCR-1034 Recommended No action is required. Action Severity INFO FCR-1034 Message , [FCR-1034], ,, INFO, , LSAN zone added in backbone fabric. Probable Cause Indicates that a new logical storage area network (LSAN) zone was added to the backbone - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 175
: . Probable Cause Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the local switch's zone database limitations. Recommended Remove excess cfg/zone/alias entries so that the number of logical storage area network (LSAN) Action zones - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 176
Setting port credits failed. Execute the portEnable command. If the problem persists try rebooting the switch. If the message persists, collect switch information using the supportShow command, and contact your switch service provider. Severity ERROR 128 Fabric OS Message Reference 53-1000437 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 177
link protocol (ELP) command was issued and it is not supported. Recommended Action Run the portEnable and portDisable commands to enable and disable the port. If the problem persists contact your switch service provider. Severity ERROR FCR-1053 Message , [FCR-1053], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 178
in the MetaSAN. Recommended No action is required if backbone-to-edge routing is not needed. Otherwise replace the switch with Action one that supports backbone to edge routing. Severity INFO FCR-1057 Message , [FCR-1057], ,, ERROR, , EX_Port( - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 179
() has an incompatible configuration setting. Probable Cause Indicates that virtual channel (VC) Link Init is enabled on the local switch and the remote switch is negotiating in R_RDY mode. The fabric might not form properly. Recommended Action Check the configuration on the local - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 180
, system only supports EX/VEX_ports. Probable Cause Indicates that the maximum number of supported EX_ports or VEX_ports >. Probable Cause Indicates that the fabric ID of the switch does not match the local switch. Recommended Run the switchShow command to display the fabric - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 181
the switch is the fabric split, then merge the fabrics and manually re-enable the port. If there is another fabric connected fabric exceeds the maximum number supported by the Fibre Channel. The limit FC Routing service is disabled. Probable Cause Indicates that the FC Routing service is disabled - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 182
with the fcrState set to 1 (enabled). Note that the FC Routing service is disabled by the factory. Recommended No action is required. Action Severity FC Routing configuration is set to default. Probable Cause Indicates that the FC Routing configuration is set to default by user. This removes all - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 183
Recommended No action is required. Action Severity INFO 20 FCR-1072 Fabric OS Message Reference 135 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 184
switch in the backbone/edge that supports different limit of logical storage area network (LSAN) zones was detected. Recommended Action Use the fcrResourceShow command on all Fibre Channel Routers in the Meta-SAN to find the lowest supported ) has older firmware, which only supports a lower number - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 185
[FCR-1076], ,, ERROR, , Port disabled, system only supports front domains. Probable Cause Indicates that the maximum number of supported front domains was exceeded. To enable the specified port, disable any other operational front domain and - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 186
20 FCR-1076 138 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 187
switch if it has redundant control processors (CPs) or reboot the switch. Run the supportShow command to check if your flash is full. If the flash is full a bladed switch, execute the haFailover command. If the problem persists, or if this is a nonbladed switch, download a new firmware version - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 188
fmsmode using the ficonCupSet command. Refer to the Fabric OS Administrator's Guide for information on core PID mode and the Fabric OS Command Reference unit port (FICON-CUP) daemon failed. Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 189
problem. Recommended Action If the message persists, check the memory usage on the switch, run the supportSave command and contact your switch service provider. Severity WARNING FICU-1008 Message perfDelFilterMonitor command to delete the filter-based performance monitors used on all Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 190
21 FICU-1010 FICU-1010 Message , [FICU-1010], ,, WARNING, , FMS Mode enable failed due to address conflict with port . Probable Cause Indicates that the fibre connectivity FICON Management Server mode (fmsMode) was not enabled because the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 191
Chapter FKLB System Messages 22 FKLB-1001 Message , [FKLB-1001], ,, WARNING, , exchange overlapped, pid= Probable Cause Indicates that the FC kernel driver has timed out the exchange while the application is still active. When the FC kernel - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 192
22 FKLB-1001 144 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 193
>, [FLOD-1004], , FFDC, ERROR, , Excessive LSU length = Probable Cause Indicates that the LSU size exceeds what the system can support. Recommended Reduce the number of switches in the fabric or reduce the number of redundant ISLs between two Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 194
23 FLOD-1005 FLOD-1005 Message , [FLOD-1005], ,, WARNING, , Invalid received domain ID: Probable Cause Indicates that the received LSR contained an invalid domain number. Recommended No action is required; the LSR is discarded. Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 195
number> out of range Probable Cause Indicates that the specified input port number is out of range; it does not exist on the switch. Recommended No action is required. Action Severity ERROR FSPF-1002 Message , [FSPF-1002], ,, INFO, , Wrong neighbor ID - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 196
ID. It should be set to 0 for a nonhierarchical fabric. Brocade switches support only section ID 0. Recommended Action Use a frame analyzer to verify the firmwareDownload command to update the firmware to the latest version. All current versions of the Fabric OS support FSPF version 2, which is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 197
persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSS-1002 Message , [FSS-1002], ,, WARNING, , Component () sending too - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 198
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR FSS-1005 Message , [FSS-1005], ,, WARNING, , FSS read failure Probable Cause - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 199
eth1 (as root) or run supportShow/supportSave to validate the network configuration; then try to restore the synchronization by issuing the haSyncStart command. If the problem persists, contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 151 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 200
25 FSS-1007 152 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 201
not become synchronized, run the haDump command to diagnose the problem. If the problem persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 153 53-1000437 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 202
fails, the failover will be disruptive. In a non-bladed system, this message is logged when the firmware upgrade/downgrade was invoked. The new firmware version is not compatible with current running version. This cause a disruptive firmware upgrade/downgrade. Recommended For a dual CP system, run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 203
means that the fans and airflow of a switch are functioning normally. Verify that the location temperature is within the operational range of the switch. Refer to the hardware reference manual for the environmental temperature range of your switch. Severity WARNING Fabric OS Message Reference 155 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 204
> . Probable Cause Indicates that the internal temperature of the switch has changed from a value outside of the acceptable range to a that the speed of the fan has changed. Fan problems typically contribute to temperature problems. Recommended Action No action is required. Respond to this - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 205
is . Probable Cause Indicates that the speed of the fan has fallen below the low boundary. Fan problems typically contribute to temperature problems. Recommended Consistently abnormal fan speeds generally indicate that the fan is failing. Replace the fan Action field-replaceable unit - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 206
that it is seated correctly in the chassis. Run the psShow command to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 Message , [FW-1010], ,, WARNING, , , is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 207
>, is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the power supply counter changed from a value outside of the acceptable range to a value within the acceptable range. Recommended No action is required. Respond - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 208
, , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The receive performance area measures the amount of incoming laser to help you - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 209
name>, , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has fallen below the low boundary. The receive performance area measures the amount of incoming - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 210
Label>, is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has fallen below the low boundary. The transmit performance area measures the amount of outgoing laser - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 211
is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has changed from a value outside of the acceptable range to a value within the acceptable range - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 212
27 FW-1047 FW-1047 Message , [FW-1047], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has risen - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 213
27 FW-1050 FW-1050 Message , [FW-1050], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has fallen - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 214
SFP failures also cause E_Ports to go down. E_Port downs might be caused by transient errors. A low number of E_Port failures means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 215
fabric reconfigurations has changed. The following actions can cause a fabric reconfiguration: • two switches with the same domain ID have connected to one another. • two fabrics have error and might not require troubleshooting. Severity INFO Fabric OS Message Reference 167 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 216
below the low boundary. The following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have a transient error and might not require troubleshooting. Severity INFO 168 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 217
changes has changed. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 218
the high boundary. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 219
Segmentation changes might occur due to: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 220
Segmentation changes might occur due to: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 221
27 FW-1131 FW-1131 Message , [FW-1131], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of zone changes has risen above the high boundary. Zone - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 222
27 FW-1134 FW-1134 Message , [FW-1134], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric logins has fallen below the low boundary. Fabric - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 223
fallen below the low boundary. SFP state changes occur when the SFP is inserted or removed. A low number of SFP state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 224
physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. A low number of link loss errors means that the switch is functioning normally - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 225
problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot loss errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Fabric OS - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 226
form-factor pluggables (SFPs) are not faulty. If you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity WARNING FW-1167 Message , [FW-1167], ,, INFO, , - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 227
experiences has changed. Loss of signal generally indicates a physical problem. Recommended Check both ends of your cable connection. Verify that user installation. A low number of signal loss errors means that the switch is functioning normally. Severity INFO FW-1170 Message , [FW- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 228
the low boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware problems. A low number of protocol errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 229
. Probable Cause Indicates that the number of invalid words that the port experiences has changed. Invalid words usually indicate a hardware problem with an small form-factor pluggable (SFP) or cable. Recommended Check both ends of your connections, your SFP, and your cable to verify - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 230
the port experiences has fallen below the low boundary. Invalid words usually indicate a hardware problem with an small form-factor pluggable (SFP) or cable. A low number of invalid words means that the switch is functioning normally. Recommended No action is required. Respond to this message as is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 231
message as is appropriate to the particular policy of the Action end-user installation. A low number of invalid CRCs means that the switch is functioning normally. Severity INFO FW-1182 Message , [FW-1182], ,, WARNING, , , , is above - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 232
27 FW-1183 FW-1183 Message , [FW-1183], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of invalid cyclic redundancy checks - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 233
27 FW-1186 FW-1186 Message , [FW-1186], ,, INFO, , , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the percentage of incoming traffic that the port - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 234
27 FW-1189 FW-1189 Message , [FW-1189], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the percentage of outgoing traffic that the port experiences - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 235
, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port. A low number of port state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 236
fluctuations, and aging equipment. You should set your high boundaries to five- or six-digit figures, as only large numbers of messages indicate a problem in this area. A low level of invalid CRC errors means that the switch is functioning normally. 188 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 237
fluctuations, and aging equipment. You should set your high boundaries to five- or six-digit figures, as only large numbers of messages indicate a problem in this area. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 238
27 FW-1240 FW-1240 Message , [FW-1240], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of end-to-end (EE) cyclic redundancy check (CRC) errors has - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 239
=, Low=). Current value is . Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has changed. Receive performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 240
High value>, Low=). Current value is . Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch transmits has changed. Transmit performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 241
value>, Low=). Current value is . Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch transmits has fallen below the low boundary. Transmit performance messages appear due to the number of word frames that travel from the configured S_ID - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 242
fallen below the low boundary. The port has received a small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 243
indicate that a telnet connection request has been received from an unauthorized IP address. The TELNET_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish telnet connections to switches in the fabric. Recommended Action Run the errShow command to determine - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 244
indicate that a telnet connection request has been received from an unauthorized IP address. The TELNET_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish telnet connections to switches in the fabric. Recommended Action Run the errShow command to determine - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 245
indicate that a browser connection request has been received from an unauthorized IP address. The HTTP_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish browser connections to the switches in the fabric. Recommended No action is required. Action Severity - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 246
. The simple network management protocol policy (SNMP_POLICY) contains a list of internet protocol (IP) addresses that are authorized to establish API connections to switches in the fabric. Recommended No action is required. Action Severity INFO FW-1306 Message , [FW-1306], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 247
. The simple network management protocol policy (SNMP_POLICY) contains a list of internet protocol (IP) addresses that are authorized to establish API connections to switches in the fabric. Recommended No action is required. Action Severity INFO FW-1308 Message , [FW-1308], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 248
range to a value within the acceptable range. RSNMP violations indicate that an SNMP "get" operation request has been received from an unauthorized IP address. Recommended No action is required. Action Severity INFO FW-1312 Message , [FW-1312], ,, INFO, - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 249
fallen below the low boundary. WSNMP violations indicate that an SNMP "get/set" operation request has been received from an unauthorized IP address. Recommended No action is required. Action Severity INFO FW-1314 Message , [FW-1314], ,, WARNING, , - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 250
. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security class messages . SES violations indicate that an small computer system interface (SCSI) Enclosure Services (SES) request has been received from an unauthorized world-wide name ( - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 251
outside of the acceptable range to a value within the acceptable range. SES violations indicate that an small computer system interface (SCSI) Enclosure Services (SES) request has been received from an unauthorized world-wide name (WWN). The SES_POLICY contains a list of WWNs of device ports that - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 252
of serial violations has changed. Serial violations indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial port access is enabled. Recommended Action Run the errShow command to determine the WWN of - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 253
risen above the high boundary. Serial violations indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial port access is enabled. Recommended Action Run the errShow command to determine the WWN of the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 254
violations has changed. Front panel violations indicate that an unauthorized front panel request has been received. The FRONTPANEL_POLICY contains a list of switch world-wide names (WWNs) for which front panel access is enabled. Recommended Action Run the errShow command to determine the WWN of - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 255
within the acceptable range. Front panel violations indicate that an unauthorized front panel request has been received. The FRONTPANEL_POLICY contains a list of switch world-wide names (WWNs) for which front panel access is enabled. Recommended No action is required. Action Severity INFO FW-1332 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 256
to join the fabric. The DCC_POLICY allows for the specification of rules for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI) request, the world-wide name (WWN) specified in the FLOGI is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 257
to join the fabric. The DCC_POLICY allows for the specification of rules for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI) request, the world-wide name (WWN) specified in the FLOGI is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 258
for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI detected. Recommended Action Run the errShow command to determine the IP location of the login attempt. Responses to security-class - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 259
detected. Recommended Action Run the errShow command to determine the IP location of the login attempt. Responses to security-class downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch compares this timestamp to its current - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 260
world-wide name (WWN). When the primary fabric configuration server (FCS) downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the difference is too great, it rejects the packet - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 261
in the fabric, the packet is signed using the private key of the primary FCS. The receiving switch has to verify this signature with the public key of the primary FCS switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 262
in the fabric, the packet is signed using the private key of the primary FCS. The receiving switch has to verify this signature with the public key of the primary FCS switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 263
in the fabric, the packet is signed using the private key of the primary FCS. The receiving switch has to verify this signature with the public key of the primary FCS switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 264
in the fabric, it first sends its certificate to all the switches in the fabric. The receiving switch has to verify that the sender is the primary FCS switch and its certificate is signed by the Root CA recognized by the receiving switch. This counter keeps track of the number of packets received - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 265
that the number of authentication failures has fallen below the low boundary. Authentication failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 266
outside of the acceptable range to a value within the acceptable range. Authentication failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 267
>, is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has risen above the high boundary. This counter keeps track of the number of unexpected SLAP packets - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 268
is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of time service (TS) out-of-sync violations has fallen below the low boundary. Recommended No action is required. Action Severity INFO FW-1366 Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 269
Current value is . Probable Cause Indicates that the number of time service (TS) out-of-sync violations has changed from a value outside of the acceptable fabric, but it still has the WWN of the last primary FCS switch, it increments this counter and resets the WWN of the primary FCS - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 270
finds that there are no FCSs in the fabric, but it still has the WWN of the last primary FCS switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user policies. - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 271
to a value within the acceptable range. This violation indicates the number of secure switches with different version stamps have been detected. When a switch is in secure mode, it connects only to another switch that is in secure mode and has a compatible security database. A compatible security - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 272
tracks how many times commands allowed only on the primary fabric configuration server (FCS) switch have been executed on a non-primary FCS switch. There are many commands that can be executed only on the primary FCS switch as well as one security command that can be executed only on a backup FCS - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 273
Indicates that the flash usage percentage has changed. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 274
usage percentage has risen above the high boundary. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended You might have to remove some unwanted files to create some flash space. Run the supportSave Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 275
Severity WARNING FW-1427 Message , [FW-1427], ,, WARNING, , Switch status change contributing factor Power supply: bad. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of faulty - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 276
27 FW-1428 FW-1428 Message , [FW-1428], ,, WARNING, , Switch status change contributing factor Power supply: absent. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of missing - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 277
non-redundant. If you power cycle a Brocade 24000 chassis in dual-domain configuration, and then reset the micro-switch of the active CP firmware to both CPs. Replace any faulty CPs. If you reset the micro-switch (the latch on the CP blade) on the active CP before the heartbeat was up on a power - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 278
FW-1434], ,, WARNING, , Switch status change contributing factor Blade: blade failures. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of blade failures is greater than or equal to the policy set - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 279
faulty or deteriorating small form-factor pluggables (SFPs). Action Severity WARNING FW-1438 Message , [FW-1438], ,, WARNING, , Switch status change contributing factor Missing SFPs: missing SFPs. Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 280
that the state of the specified field-replaceable unit (FRU) has changed to "inserted". This means that an FRU is inserted but not powered on. Recommended No action is required. Verify that the event was planned. Action Severity INFO FW-1442 Message , [FW-1442], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 281
switch now requires 4 power supplies for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to number of power supplies. So those values will not be automatically changed. The default values with no AP blades are: 3 out of service indicates switch - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 282
27 FW-1500 FW-1500 Message , [FW-1500], ,, WARNING, , Mail overflow - Alerts being discarded. Probable Cause Indicates that mail alert overflow condition has occurred. Recommended Resolve or disable the mail alert using the fwMailCfg command. Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 283
possible. Recommended Action Reboot the standby CP blade by ejecting the card and reseating it. If the problem persists, replace the standby CP. Severity This message records switch processor reboot reasons that were initiated by the user or the switch errors. The switch processor reboots can - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 284
28 HAM-1005 • Unknown • Fastboot • Giveup Master:SYSM • CP Faulty:SYSM • FirmwareDownload • ConfigDownload:MS • ChangeWWN:EM • Reboot:WebTool • Fastboot:WebTool • Software Fault:Software Watchdog • Software Fault:Kernel Panic • Software Fault:ASSERT • Reboot:SNMP • Fastboot:SNMP • Reboot • Chassis - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 285
28 HAM-1006 Recommended The standby CP will take over and reset the active CP.The system will be non-redundant as the Action standby becomes the active CP. Severity CRITICAL Fabric OS Message Reference 237 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 286
28 HAM-1006 238 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 287
FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL HAMK-1002 Message , [HAMK- the active CP after 10 minutes, reboot the standby CP blade by ejecting the blade and reseating it. Severity INFO HAMK-1003 Message , - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 288
29 HAMK-1004 HAMK-1004 Message ,[HAMK-1004], ,, INFO, , Resetting standby CP (double reset may occur). Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. This message is typically seen when the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 289
() is above threshold. Probable Cause Indicates that the blade voltage is above the threshold. Recommended Replace the faulty blade or switch (for nonbladed switches). Action Severity ERROR HIL-1102 Message , [HIL-1102], ,, ERROR - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 290
, and 4024 the entire switch must be replaced, because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100, 4900, 5000, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 291
, and 4024 the entire switch must be replaced, because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100, 4900, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other voltage - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 292
. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command to monitor the speed of the fan generating this error. If the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 293
problem can quickly cause the switch to overheat. This message is specific to nonbladed switches and is not applicable to the Brocade 24000, or 48000. Recommended For the Brocade operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 294
-replaceable unit (FRU) has failed or has been removed. This message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Replace the affected fan FRU immediately. Action Severity WARNING HIL-1302 Message , [HIL-1302], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 295
30 HIL-1305 Severity ERROR HIL-1305 Message , [HIL-1305], ,, ERROR, , One or two fan(s) failed. Replace failed fan FRUs immediately. Probable Cause Indicates that multiple fan field-replaceable units (FRUs) have failed. This message is often preceded by - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 296
have failed. This message is often preceded by a low fan speed message. Recommended Since the fans are not field replaceable, replace the switch if the temperature is high. Action Severity WARNING HIL-1311 Message , [HIL-1311], ,, INFO, , No fans are - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 297
-1501 Message Probable Cause , [HIL-1501], ,, WARNING, , Slot , high temperature (). Indicates that the temperature of this blade has risen above the warning threshold. Fabric OS Message Reference 249 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 298
and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the blade. Severity CRITICAL HIL-1503 Message , [HIL-1503], , FFDC - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 299
. To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 300
. To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 301
. Try rebooting or power cycling the switch. Severity ERROR HIL-1602 Message , [HIL-1602], , FFDC, CRITICAL, , Multiple temperature sensors failed. Service immediately. Probable Cause Indicates that temperature readings from multiple sensors are out - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 302
30 HIL-1602 254 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 303
. Probable Cause Indicates that the HLO message was incompatible with the value specified in the FSPF protocol. The Brocade switch will not accept FSPF frames from the remote switch. In the Fabric OS, the HLO timeout value is not configurable, so this error can only occur when the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 304
number in the HLO message has an invalid value. This error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The HLO message of the remote switch must be compatible with the value specified in the FSPF Action protocol. Refer to documentation of - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 305
Action Run the firmwareDownload command to reinstall the firmware to your switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 257 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 306
32 HMON-1001 258 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 307
>, [HTTP-1001], ,, INFO, , Switch PIDformat has changed to . Probable Cause Indicates that information on PID, format refer to the Fabric OS Administrator's Action Guide. Severity INFO HTTP-1002 Message , [HTTP-1002], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 308
33 HTTP-1003 260 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 309
has crashed unexpectedly and restarting attempts have failed. Recommended Power off and power on the blade using the slotPowerOff and slotPowerOn commands. On the Action Brocade 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING Fabric OS Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 310
34 IBD-1001 262 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 311
target name length exceeds the character limit [] Probable Cause Indicates that the target name length exceeds the supported limit. Recommended Redo the discovery to get the latest target list, and try again. Action Severity WARNING IBPD-1003 Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 312
35 IBPD-1003 264 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 313
or power cycle the switch. Severity ERROR ICPD-1002 Message , [ICPD-1002], ,, ERROR, , Failed to initialize rc = . Probable Cause Indicates that an initialization of a module within the ICPD failed. Recommended Download a new firmware - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 314
ICPD-1007 Message , [ICPD-1007], ,, INFO, , iSNSC service is on the switch. Probable Cause Indicates that the iSNSC service is enabled or disabled on the switch. Recommended No action is required. Action Severity INFO 266 Fabric OS Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 315
36 ICPD-1008 ICPD-1008 Message , [ICPD-1008], ,, INFO, , iSCSI switch () is . Probable Cause Indicates that the iSCSI switch is reachable or unreachable. Recommended No action is required. Action Severity INFO Fabric OS Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 316
36 ICPD-1008 268 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 317
of address change> Probable Cause Indicates that a change in local IP address has occurred. If the source of the address change is manual, this means that the address change was initiated by a user. If the source of the address change is the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 318
37 IPAD-1001 270 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 319
module within the IPS daemon failed. Recommended Download a new firmware version using the transient problem. Recommended Action If the message persists, check the memory usage on the switch, contact your switch service provider. Severity WARNING IPS-1004 Message , [IPS-1004], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 320
return the Action port mode to neutral before attempting to configure the port for a different mode or use. Severity WARNING IPS-1005 Message , [IPS-1005], ,, WARNING, , Tunnel Authorization Failure for slot () port(ge) tunnel ID( - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 321
Chapter ISCS System Messages 39 ISCS-1000 Message , [ISCS-1000], ,, ERROR, , Slot Port GE crashed unexpectedly. Probable Cause Indicates that specified port has crashed. Recommended No action is required; the port will - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 322
39 ISCS-1000 274 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 323
>, [ISNS-1003], ,, INFO, , Peering with external iSNS server is disabled. Probable Cause Indicates that the IP address of internet storage name service (iSNS) server is set to zero, so peering is disabled. Recommended If you wish to enable the iSNS server, use the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 324
Period in seconds>. Probable Cause Indicates that the internet storage name service (iSNS) client failed to receive a successful response for a , Start re-register with external iSNS server slot/port /ge. Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 325
Peering with external iSNS server not started because no virtual targets Refer to the appropriate hardware reference manual for valid slot and Action port ranges Service is . Indicates the current state of the internet storage name service - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 326
INFO, , Start peering with external iSNS server on management port. Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS) on the management port. Recommended No action is required. Action Severity - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 327
found, run supportFtp to send all core files to a secure server location. Copy the warning message along with any core file information, and contact your switch service provider. Severity WARNING Fabric OS Message Reference 279 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 328
41 KSWD-1003 280 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 329
Chapter KTRC System Messages 42 KTRC-1001 Message , [KTRC-1001], ,, WARNING, , Dump memory size exceeds dump file size Probable Cause Indicates that the dump memory size has exceeded the dump file size. Recommended No action is required. Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 330
42 KTRC-1005 Recommended No action is required. Action Severity ERROR KTRC-1005 Message , [KTRC-1005], ,, ERROR, , Trace initialization failed. . . Probable Cause Indicates that Trace was unable to - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 331
or the haFailover command on bladed switches. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING LOG-1002 Message , [LOG-1002], , FFDC - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 332
43 LOG-1003 LOG-1003 Message , [LOG-1003], ,, INFO, , The log has been cleared. Probable Cause Indicates that the persistent error log has been cleared. Recommended No action is required. Action Severity INFO 284 Fabric OS Message Reference 53- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 333
valid link state ID is the same as the valid domain ID, whose range is from 1 through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity ERROR LSDB-1002 Message , [LSDB-1002], ,, INFO, - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 334
domain Probable Cause Indicates that there is no link state record for the specified local domain. Recommended No action is required. The other switch will pass the LSD when the fabric has become stable. Action Severity WARNING 286 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 335
service provider. Severity ERROR MFIC-1002 Message , [MFIC-1002], ,, INFO, , Chassis FRU header not programmed for switch NID, using defaults (applies only to FICON environments). Probable Cause Indicates that custom switch node descriptor (NID) fields - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 336
to Probable Cause Indicates that one or more switches joined the fabric with a different insistent domain ID (IDID) mode ". Recommended Action IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with the same IDID mode as the fabric. - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 337
Chapter MPTH System Messages 46 MPTH-1001 Message , [MPTH-1001], , FFDC, ERROR, , Null parent, lsId = Probable Cause Indicates that a null parent was reported. MPATH uses a tree structure in which the parent is used to connect to the root of - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 338
46 MPTH-1003 290 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 339
• 7 - MSG_LINIT_IU • 8 - MSG_RSCN • 9 - MSG_IOCTL • 10 - MSG_ACCEPT • 11 - MSG_IU_FREE • 12 - MSG_US • 13 - MSG_EXT_RSCN • 14 - MSG_RDTS_START • 15 - MSG_RDTS_SENDEFP • 16 - MSG_RDTS_RESET Recommended No action is required. Action Severity ERROR Fabric OS Message Reference 291 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 340
47 MQ-1004 292 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 341
. Recommended Action: Set the flag for the MS Platform Service. • The GCAP (MS Get Capabilities) is not supported by another switch. Recommended Action: Upgrade the firmware level on the switch to a level that supports RCS. • The request to the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 342
48 MS-1003 • Run the firmwareDownload command to upgrade the firmware level on the switch to a level that supports RCS. RCS is supported ; then run the supportSave command and contact your switch service provider. Severity INFO MS-1004 Message , - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 343
48 MS-1005 Severity INFO MS-1005 Message , [MS-1005], ,, ERROR, , MS Invalid CT Response from d= Probable Cause Indicates that the management server (MS) received an invalid common transport (CT) response from switch your switch service provider - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 344
bit error rate threshold • Loss of signal or synchronization • Not operational seq. recognized • Primitive sequence timeout • Unrecognized link incident Recommended Action Persistent RLIR incidents are likely due to SAN hardware problems and contact your switch service provider. Severity ERROR - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 345
48 MS-1023 MS-1023 Message , [MS-1023], ,, INFO, , Management Server Topology Discovery Service Probable Cause Indicates that Management Server Topology Discovery Service is being enabled or disabled. Recommended No action is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 346
48 MS-1024 298 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 347
this error occurs repeatedly, it means the protocol implementation between two connected switches has problems. Recommended Action Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is FULL, then this message can safely be ignored. Otherwise, run the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 348
(NBFSM) states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full Recommended No action is required. The Fabric OS auto recovers from this problem. Action Severity WARNING 300 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 349
the maximum frame size that the remote switch can handle. Recommended Action Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, or v3.2 or higher, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 350
>, can't sync. Probable Cause Indicates that the name server on the standby CP has lower supported capability than the active CP due to different firmware versions running on the active and standby CPs. This means that the active and standby CPs are out of sync. Any execution of the haFailover - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 351
. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 303 53 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 352
PDM) process ran out of memory. Recommended Action Reboot or power cycle the switch. If the message persists, run supportFtp (as needed) firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 353
. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 305 53 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 354
. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1012 Message , [PDM - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 355
Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PDM-1019 Message , [PDM - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 356
is not supported by older firmware. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 357
51 PDM-1024 Fabric OS Message Reference 309 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 358
51 PDM-1024 310 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 359
the panic dump and core dump files and a trap generated. The watchdog register codes are as follows: • 0x10000000 bit set means that the watch dog timer (WDT) forced a core reset. • 0x20000000 bit set means that the WDT forced a chip reset. • All other code values are reserved. Recommended Run the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 360
52 PDTR-1002 312 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 361
-line prompt. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PLAT-1001 Message , [PLAT-1001], ,, INFO, , Resetting standby CP (double reset may - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 362
53 PLAT-1001 314 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 363
specified port is now disabled because the link on this port had multiple failures that exceed an internally set threshold on the port. This problem is typically related to hardware. Recommended Action Check and replace (if necessary) the hardware attached to both ends of the specified port number - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 364
-1005 PORT-1005 Message , [PORT-1005], ,, WARNING, , Slot port does not support configured L_port. Issue portCfgLport to clear configuration. Probable Cause Indicates that the specified port is configured to be an L_port, but - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 365
automatically. If it does not, reboot or power cycle the switch to Action reinitiate the firmware. Severity CRITICAL PS-1001 Message , Recommended No action is required. Refer to the Fabric OS Administrator's Guide for more information about the Action PID format. Severity INFO PS- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 366
has attempted to add end-to-end monitors on at least one ISL port. Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is Action enabled. ISL monitoring can only be disabled through the Fabric Access API. Severity WARNING PS-1005 Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 367
Probable Cause Indicates that the portSwap feature has been enabled in the switch. Recommended No action is required. Action Severity INFO PSWP-1003 Cause Indicates that the portSwap feature has been disabled in the switch. Recommended No action is required. Action Severity INFO Fabric OS - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 368
56 PSWP-1003 320 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 369
Cause Indicates that the maximum storage size for FFDC data capture is reached. Recommended Run the supportSave command and contact your switch service provider. Action Severity WARNING RAS-1003 Message , [RAS-1003], ,, WARNING, , Audit message log is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 370
>, Software 'verify' error detected. Probable Cause Indicates a internal software error. Recommended Run the supportSave command and contact your switch service provider. Action Severity WARNING RAS-1005 Message , [RAS-1005], , FFDC, WARNING, , Software - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 371
v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity INFO RCS-1002 Message , . Check memory usage on the switch using the memShow command. Reboot or power cycle the switch. Severity ERROR Fabric OS Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 372
in Fabric OS v2.6, v3.1 and greater, v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS-1005], ,, INFO, , Phase , - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 373
remote domain rejected an RCS phase initiated by an application on the local switch. If the reject phase is ACA, the remote domain might be busy and might not be compatible or the domain does not have the license to support that application. Recommended Action If the reject is in ACA phase, wait - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 374
58 RCS-1008 326 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 375
Cause Indicates that an authentication error was reported. The specified client IP address has faulty credentials. Recommended Enter the correct user name and Probable Cause Indicates that the SSL certificate file configured on the switch could not be accessed because root did not have read-level - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 376
, , Permission denied accessing private key file. Secure RPCd is disabled. Probable Cause Indicates that the private key file configured on the switch could not be accessed because root did not have read-level access. Recommended Change the file system access level for the private key - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 377
Count • detail4: Status • detail5: Process ID Recommended Action Run the fabricShow command to see if the specified domain ID is online. Enable the switch with the specified domain ID. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 378
ID is reachable. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO 330 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 379
Chapter SAS System Messages 61 SAS-1001 Message , [SAS-1001], ,, ERROR, , string description of command which failed> of GE failed. Please retry the command. Data inst= st= rsn= - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 380
61 SAS-1001 332 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 381
queue has failed because the SCN queue for the specified daemon name is full. This might be caused by the daemon hanging or if the system is switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 382
62 SCN-1001 334 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 383
. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1002 Message , [SEC-1002], ,, ERROR, , Security data fails: - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 384
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING SEC-1005 Message , [SEC-1005], ,, INFO, , Primary FCS receives data request from - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 385
HTTP connection. Probable Cause Indicates that a security violation was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the HTTP connection. Action Severity INFO SEC-1009 Message , [SEC - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 386
The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the certificate by following the field upgrade process. Severity WARNING - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 387
() detected. Probable Cause Indicates that a corruption occurred during the distribution of the security database. This can occur only when the primary fabric configurations server (FCS) distributes the security database to the other switches in the fabric, then local validation - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 388
error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1031 Message , [SEC-1031], ,, WARNING, , Current security policy DB cannot be supported by standby. CPs will go out of sync. Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 389
command. Only the secPolicyCreate command supports use of the asterisk for adding switches to policies. Recommended Action Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the switch connection control (SCC) policy. Refer - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 390
world-wide name (WWN) entered in the policy member list had an invalid format. Recommended Run the command again using the standard WWN format, 16 hexadecimal digits grouped as eight Action colon separated pairs. For example: 50:06:04:81:D6:F3:45:42. Severity ERROR SEC-1038 Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 391
63 SEC-1040 SEC-1040 Message , [SEC-1040], ,, ERROR, , Invalid portlist (). Cannot combine * with port member in the same portlist. Probable Cause Indicates that the port list contains the wildcard asterisk (*) character. You cannot use the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 392
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 393
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 394
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 395
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 396
configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in either that no domains or domains more than the maximum number supported are specified. Recommended Enter the correct number of domains. Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 397
Action generate the PKI objects and install the certificate by following the field upgrade process. Severity ERROR SEC-1065 Message , [SEC-1065], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 398
. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity ERROR SEC-1073 Message , [SEC-1073], ,, ERROR, , No FCS policy in list! Probable - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 399
not allowed in non-secure mode is attempted, do not perform the operation in non-secure mode. In secure mode, run the command from a switch that has required privilege, that is, either a backup FCS or primary FCS. Severity ERROR SEC-1075 Message , [SEC-1075], ,, ERROR - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 400
63 SEC-1077 SEC-1077 Message , [SEC-1077], ,, ERROR, , Failed to activate new policy set on all switches. Probable Cause Indicates that the policy could not be activated. Possible reasons that the policy could not be activate include not enough memory or - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 401
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 402
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 403
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 404
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 405
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 406
fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the Action supportSave command and contact your switch service provider. Severity ERROR 358 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 407
could not be found. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity ERROR SEC-1099 Message , [SEC-1099], ,, ERROR, , Please enable your - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 408
one or more switches in the fabric switches in the fabric are in the ready state. When all switches switch failed to download certificate, security database, or policies. This can happen when switch Probable Cause Indicates that the switch failed to get either that the primary switch has a valid - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 409
for re-creating PKI objects outlined in the Secure Fabric OS Administrator's Guide. Severity ERROR SEC-1107 Message , [SEC-1107], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 410
security event was planned. If the security event was planned, run the secFabricShow command to verify that all switches in the fabric are in the ready state. When all switches are in the ready state, retry the operation. Severity ERROR SEC-1110 Message , [SEC-1110], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 411
-name>, FCS list must be the first entry in the Active Security policies, and the same as the current active FCS list in the switch. Probable Cause Indicates that either a security policy download is attempted with an active policy that does not have the fabric configurations server (FCS) policy - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 412
all switches are in the ready state, retry the operation. Severity INFO SEC-1118 Message , [SEC-1118], ,, INFO, , Fail to set SNMP string. Probable Cause Indicates that the SNMP string could not be set. Recommended Usually this problem is transient - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 413
, [SEC-1121], ,, ERROR, , Time is out of range when . Probable Cause Indicates that the time on the switch is not synchronized with the primary fabric configurations server (FCS), the data packet is corrupted, or a replay attack is launched on the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 414
INFO SEC-1130 Message , [SEC-1130], ,, INFO, , The Primary FCS has failed over to a new switch. Probable Cause Indicates that an FCS failover operation was completed successfully. Recommended Action Verify that the security event was planned. If the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 415
from the primary fabric configurations server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 416
from the primary fabric configurations server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 417
by 16. The support RCS, obtain the latest firmware version from your switch supplier, and run the firmwareDownload command to upgrade the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 418
the failed command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO 370 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 419
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 420
Severity ERROR SEC-1165 Message , [SEC-1165], ,, ERROR, , Low memory, failed to enable security on all switches. Probable Cause Indicates that the system is low on memory. Recommended Wait a few minutes and try the command again. Action Severity ERROR - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 421
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 422
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 423
to set password. Probable Cause Indicates that the FCS or non-FCS password could not be set. Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no Action external entity is trying to access the fabric. When verification is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 424
with a valid value. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR 376 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 425
. Probable Cause Indicates that the switch database was enabled or disabled as the secondary authentication, accounting, and authorization (AAA) mechanism when the remote authentication dial-in user service (RADIUS) is the primary AAA mechanism. Recommended No action is required. Action Severity - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 426
name> tries to FLOGI to index/area of switch . Probable Cause Indicates that a device connection control (DCC) number>,, INFO, , Security violation: Unauthorized host with IP address tries to do SNMP write operation. Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 427
>,, INFO, , Security violation: Unauthorized host with IP address tries to do SNMP read operation. Probable Cause Indicates attempted to establish an HTTP connection. Recommended Action Check if the host IP address specified in the message can be used to manage the fabric - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 428
through the specified connection method; the login failed. Recommended The error message lists the violating IP address. Verify that this IP address is being used by a valid Action switch admin. Use the correct password. Severity INFO SEC-1194 Message , [SEC-1194], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 429
Switch does not have all default account names. Probable Cause Indicates that the default switch accounts admin and user do not exist on the switch when enabling security. Recommended Reset the default Recommended Action Check to see if the host IP address specified in the message can be used to - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 430
. An attempt was made to access the serial console on the specified switch instance when it is disabled. Recommended Action Check to see if an authorized access attempt is being made on the console. If so, add the switch world-wide name (WWN) to the serial policy. If the host is not allowed - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 431
Login information: Login successful via TELNET/SSH/RSH. IP Addr: Probable Cause Indicates the IP address of the remote station logging in. Recommended No the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 383 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 432
run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Probable Cause Indicates that the switch is set up with VC-encoded - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 433
Secure Fabric OS feature. Recommended Run the firmwareDownload command to update the firmware to the latest version for your specific Action switch. Verify that the firmware you are installing supports the Brocade Secure Fabric OS feature. Severity INFO Fabric OS Message Reference 385 53 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 434
to validate PKI objects occurs, follow the steps for re-creating PKI objects outlined in the Secure Fabric OS Administrator's Guide. If PKI objects are valid, verify that an unauthorized switch is not trying to access the fabric. Severity INFO 386 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 435
server identity>. Probable Cause Indicates that after some servers timed out, the specified remote authentication dial-in user service (RADIUS) server responded to a switch request. Recommended If the message appears frequently, move the responding server to the top of the RADIUS server Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 436
. Probable Cause Indicates that the security enable failed on the fabric because one or more switches in the fabric have password policies that are not set to the default value. Recommended Action Verify that the security event was planned. If the security event was planned, run the passwdCfg - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 437
. Probable Cause Indicates that the call to the EM module to retrieve the IP address failed. Recommended Please reboot the system to fix this error. If the problem persists contact your switch service Action provider. Severity ERROR SEC-1315 Message , [SEC-1315], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 438
, , Non-acl domain tries to join a fabric with strict fabric wide policy Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with a strict fabric-wide policy. Recommended No action is required. The domain is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 439
Indicates that the security enable failed on the fabric because switch has conflicting configuration such as fabric wide consistency configuration or to support a device connection control (DCC) policy with more than 256 ports. Recommended Reconfigure any policy that includes more than 256 ports - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 440
error: Probable Cause Indicates that the reliable commit service (RCS) transaction failed with specified reason code. Recommended Verify that ], ,, ERROR, , Security enforcement: Switch connecting to port is not authorized to - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 441
>. Probable Cause Indicates that the IP filter policy enforcement failed due to internal system failure. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity ERROR SEC-1330 Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 442
. Reason: . Probable Cause Indicates that the secModeEnable command failed on the fabric, because default IP Filter policies are not active on the switch, or an active transaction exists on IP Filter policies. Recommended Action Verify that the security event was planned. If the security - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 443
SNMP) service could not be started because of the specified Reason. You will not be able to query the switch through SNMP. Recommended Verify that the IP address (SNMP) service failed and you will not be able to query the switch through SNMP. Recommended Reboot or power cycle the switch. This will - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 444
Indicates that the simple network management protocol (SNMP) configuration is incorrect and the SNMP service will not work correctly. Recommended Change the SNMP configuration back to the default. Action Severity ERROR SNMP-1005 Message , [SNMP-1005], , AUDIT, INFO - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 445
has ftp'ed support information to the host with IP address . Probable Cause Indicates that the supportSave command was used to transfer support information to to set the FTP parameters. After Action the FTP problem is corrected, rerun the supportSave command. Severity WARNING Fabric OS - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 446
65 SS-1001 398 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 447
power down the system during firmware upgrade. Allow the firmwareDownload command to continue without disruption. Do not fail over or power down the system during firmware upgrade the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 448
,, INFO, , Standby CP reboots. Probable Cause Indicates that the standby CP is rebooting with new firmware. Recommended Action No action is required. The firmwareDownload command is progressing as expected. Run the firmwareDownloadStatus command for more information - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 449
failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 450
"Standby CP was not responding. The command is aborted." "firmwareCommit has started on both CPs. Please use firmwareDownloadStatus and firmwareShow to see the firmware status." Status Code 0x65 0x66 0x67 0x68 0x69 0x6a 0x6b 0x6c 0x6d 0x6e 0x6f 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7a - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 451
." 0xa5 "New firmware failed to boot up. Please retry firmwareDownload." 0xa6 "firmwareCommit has started on the blade. This may take up to 10 minutes." 0xa7 "firmwareRestore is entered. System will reboot and a firmwareCommit operation will start 0xa8 upon boot up." "Switch is relocating the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 452
No need to download the same version of firmware." 0xF "Upgrade is inconsistent. Run the bootEnv (root) . Check whether the switch is supported by the requested firmware. Also check firmwareDownload help to restore the original firmware, or contact your service provider for recovery." 0x25 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 453
Device Based Routing policy is not supported by 5.1. Use aptPolicy to change the routing policy before proceeding." 0x2d "Invalid RPM package. Please reload firmware packages on the file server." 0x2e "Cannot downgrade due to presence of blade type 17. Remove or power off these blades before - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 454
firmwareDownload single mode (-s) to upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO 406 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 455
OS Administrator's Guide for troubleshooting information. specified blade. The error may be caused by an inconsistent AP blade firmware stored blade is stuck in LOADING state, remove and re-insert the blade to trigger another firmwareDownload. If the problem persists, contact your switch service - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 456
LOADING state, remove and re-insert the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1020 Message , [SULB-1020], AUDIT, ERROR, , New firmware failed to boot in slot . Probable - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 457
firmwareDownload command, for example, by powering off and on of the indicated BP blade in the middle of a firmware, firmwareDownload will automatically be restarted on the blade. Run the firmwareDownloadStatus command to monitor the progress. If the problem persists, contact your switch service - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 458
command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message , [SULB-1031], , AUDIT, WARNING, , The switch is relocating an internal firmware image. Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 459
relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1036 Message , [SULB-1036], ,, INFO, , Probable Cause Indicates the firmware version running in the system - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 460
66 SULB-1037 Probable Cause Many reasons can cause HCL to fail, such as domain not confirmed Recommended Run the reBoot command to reboot the switch manually. Action Severity Error 412 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 461
then run the Action supportSave command and contact your switch service provider. Severity ERROR SWCH-1002 Message , [SWCH Brocade 24000 or 48000 switch, run the slotPowerOff command and then the slotPowerOn command. On a Brocade 7500 or AP7600 switch, reboot or power cycle the switch - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 462
a blade has failed during failover or recovery. Recommended Action On a Brocade 24000 or 48000 switch, run the slotPowerOff command and then the slotPowerOn command. On a Brocade 200E, 3250, 3850, 3900, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, or AP7600 switch, reboot or power cycle - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 463
Probable Cause Indicates that the switch port is disabled due to the reason displayed in the message. Recommended Action Based on the disable reason displayed, blade with ports that support port swap. Then port swap the ports back to ports default area. Refer to the Fabric OS Administrator's Guide - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 464
67 SWCH-1008 416 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 465
more programs to register with system services or to fail over to active status. Recommended Action The switch is in an inconsistent state and can be corrected only by a reboot or power cycle. Before rebooting the chassis, record the firmware version on the switch or control processor (CP) and run - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 466
supported by CP Blade with ID - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 467
Action Run the memShow command to view the switch memory usage. Reboot or power cycle the switch. Run supportFtp as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL SYSM-1002 Message , [SYSM - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 468
is properly seated in its slot. Action Severity CRITICAL SYSM-1006 Message , [SYSM-1006], , FFDC, CRITICAL, , CP blade in slot is incompatible with the chassis type. Probable Cause Indicates that this chassis type is not compatible with the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 469
WATCHDOG EXPIRED generated by hardware watchdog expiration • MANUAL generated by the tracedump -n command Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity WARNING TRCE-1002 Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 470
persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR TRCE-1004 Message , [TRCE-1004], ,, WARNING, , Trace dump< optional slot indicating on - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 471
of a change in trace status. This message is only applicable to the Brocade 24000, and 48000. Recommended Action This message is often transitory. Wait FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1008 Message , [TRCE- - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 472
trace information to active CP. This message is only applicable to the Brocade 24000 and 48000. Recommended Action Run the haShow command to verify switch service provider. Severity ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 473
system and the indicated slot is unavailable. Recommended Check that the AP blade is enabled and retry the command. If the AP blade is already enabled, run Action the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 425 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 474
70 TRCE-1012 426 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 475
by an authorized user. If this message occurs repeatedly, it might indicate an unauthorized user trying to gain access to a switch. When Secure mode is enabled on the fabric, the IP address of a failed login is reported to the error log. Severity INFO TRCK-1003 Message , [TRCK-1003 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 476
, , Config file change from task: Probable Cause Indicates that the track change feature recorded a configuration change for the switch. The track change feature records any change to the configuration file in nonvolatile memory, including a configDownload. This message is not - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 477
to verify that the principal or primary FCS switch has the clock server IP configured correctly. Verify that this clock server is accessible to the switch and functional. If the principal or primary FCS does not support the feature, either choose a different switch for the role or reset the clock - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 478
The message might be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits. • Synchronizing time or role change of the principal or primary fabric configuration server (FCS) switch. If the message does not recur, it should be ignored. • - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 479
Cause Indicates that there is a change in the source of fabric time synchronization distributed from the principal or primary fabric configuration server (FCS) switch. Another clock server in the list of clock servers configured is being used. This happens when the network time protocol (NTP) query - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 480
72 TS-1008 432 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 481
number>, FFDC, CRITICAL, , Inconsistent route detected: Port = , should be Probable Cause Indicates that the switch detected an inconsistency in the routing database between the routing protocol and the hardware configuration. The first port number displayed - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 482
73 UCST-1020 434 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 483
, [UPTH-1001], ,, WARNING, , No minimum cost path in candidate list Probable Cause Indicates that the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists in the candidate list (domain ID list). Recommended No action is required - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 484
74 UPTH-1001 436 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 485
Chapter WEBD System Messages 75 WEBD-1001 Message , [WEBD-1001], ,, WARNING, , Missing or Invalid Certificate file -- HTTPS is configured to be enabled but could not be started. Probable Cause Indicates that the SSL certificate file is either invalid or - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 486
[WEBD-1007], , FFDC, INFO, , HTTP server will be restarted due to change of IP Address Probable Cause Indicates that the IP address of the switch changed and the HTTP server is restarted. Recommended No action is required. Action Severity INFO 438 Fabric OS Message - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 487
HTTP server cannot be started Probable Cause Indicates a rare error condition, where the built-in recovery process has failed to restore http services. The problem often results from invalid configuration of ssl certs., but there can be more than one reason for such failure. Recommended Run the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 488
75 WEBD-1008 440 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 489
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command to save these core files and contact your switch service provider. Severity ERROR Fabric OS Message Reference 441 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 490
76 ZOLB-1001 442 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 491
port login (PLOGI) trap processing. This messages usually indicates problems when adding content-addressable memory (CAM) entries before the transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING ZONE-1003 Message , [ZONE-1003 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 492
using both world-wide name (WWN) in one zone and in another, this will cause that port to go session based hard zoning. In session-based zoning, the zone enforcement is checked by the software. In hardware-enforced zoning, zone or alias members are defined using - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 493
the filter setup. Recommended Action There are two ways to avoid this problem. • Avoid having too many hosts zoned with a set of target • Avoid having too many zones directed at a single port group on the switch. Severity INFO ZONE-1008 Message , [ZONE-1008], ,, - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 494
in the current code release. If the QuickLoop zoning configuration is enabled on the switch, it will not be supported. Recommended Edit the zone database to remove the QuickLoop zoning definition in the effective configuration. Action Severity WARNING 446 Fabric OS Message Reference 53 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 495
Probable Cause Indicates that the required zoning license is missing. Recommended Install the zoning license using the licenseAdd command. Refer to your switch supplier to obtain a Action Zoning license if you do not have one. Severity ERROR ZONE-1015 Message , [ZONE-1015], - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 496
based hard zoning (value = 3) • FA zone (value = 5) QuickLoop zones are not supported in Fabric OS v4.x and above. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 497
, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity INFO ZONE-1024 Message , [ZONE-1024], ,, INFO, , . Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 498
has exited. • Unknown: An error was received for an unknown reason. • User Command: A user aborted the current zoning transaction. • Switch Shutting Down: The switch is currently shutting down. Recommended Action Many of the causes of this error message are transitory: for example because two - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 499
switches in your fabric. Refer to the Fabric OS Administrator's Guide for information on the zone database sizes supported for each switch automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING ZONE-1030 Message , [ZONE-1030 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 500
ZONE-1031 Message Probable Cause Recommended Action Severity , [ZONE-1031], ,, ERROR, , Switch is in interop mode. (switch, port) members not supported. The switch is set to interop mode using the interopMode command. Interop mode does not allow - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 501
is not found. Recommended Use the firmwareDownload command to reinstall the firmware. Action Severity WARNING ZONE-1035 Message , [ZONE-1035], the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 502
the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 503
the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the number>,, INFO, , The Default Zone access mode is set to No Access. Probable Cause Indicates that the Default Zone access mode is set to No - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 504
Action Severity INFO ZONE-1045 Message , [ZONE-1045], ,, INFO, , The Default Zone access mode is already set to No Access. Probable Cause Indicates that the Default Zone access mode is already set to No Access. Recommended No action is required. Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 505
Chapter AUDIT AUTH System Messages 78 AUTH-3001 Message AUDIT, , [AUTH-3001], INFO, SECURITY, , , , Event: , Status: success, Info: type has been changed from [] to []. Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 506
error might indicate that an invalid entity attempted to connect to the switch. Recommended Action Check the connection port for a possible security attack. ; then run the supportSave command and contact your switch service provider. Severity INFO 458 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 507
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO AUTH-3008 Message AUDIT, , [AUTH-3008], INFO, SECURITY, , , , Event: - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 508
78 AUTH-3008 460 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 509
Cause The system attempted to download a configuration without disabling the switch was unsuccessful because there are one or more parameters that require the switch to be disabled. Recommended Disable the switch using the switchDisable command and download the configuration. Action Severity - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 510
79 CONF-1022 462 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 511
Chapter AUDIT HTTP System Messages 80 HTTP-1002 Message AUDIT, , [HTTP-1002], INFO, ZONE, , , , Zoning transaction initiated by User: , Role: completed successfully. Probable Cause Indicates that the zoning database has - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 512
80 HTTP-1003 464 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 513
Chapter AUDIT SEC System Messages 81 SEC-3001 Message AUDIT, , [SEC-3001], INFO, SECURITY, , , , Event: , Status: success, Info: Security mode on the fabric. Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 514
81 SEC-3003 SEC-3003 Message AUDIT, , [SEC-3003], INFO, SECURITY, , , , Event: , Status: success, Info: Created policy, with member(s) . Probable Cause Indicates that a new security policy was created - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 515
81 SEC-3006 SEC-3006 Message AUDIT, , [SEC-3006], INFO, SECURITY, , , , Event: , Status: success, Info: Removed member(s) from policy . Probable Cause Indicates that a user has removed the specific - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 516
81 SEC-3009 SEC-3009 Message AUDIT, , [SEC-3009], INFO, SECURITY, , , , Event: , Status: success, Info: Security Transaction aborted. Probable Cause Indicates that the pending security transaction was aborted. Recommended Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 517
Name>, Status: success, Info: RADIUS server for AAA services. Probable Cause Indicates that a user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify that the RADIUS configuration was changed intentionally. If - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 518
name> to position . Probable Cause Indicates that a user has changed the position of the remote authentication dial-in user service (RADIUS) server. Recommended Action Verify that the RADIUS server position was intentionally changed. If the RADIUS server position was intentionally - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 519
Passwdcfg parameters set to default values. Probable Cause Indicates that the passwdCfg parameters are set to default values. Recommended Action Verify attempt via . Probable Cause Indicates that a successful login occurred. An IP Address is displayed when the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 520
Name>, Status: failed, Info: Failed login attempt via . Probable Cause Indicates that a failed login attempt occurred. Recommended Action Verify has expired or an administrator Action may manually unlock the account. Severity INFO 472 Fabric OS Message Reference - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 521
81 SEC-3024 SEC-3024 Message AUDIT, , [SEC-3024], INFO, SECURITY, , , , Event: , Status: success, Info: User account [], password changed. Probable Cause Indicates that the user's password changed. Recommended Action - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 522
81 SEC-3027 SEC-3027 Message AUDIT, , [SEC-3027], INFO, SECURITY, , , , Event: , Status: success, Info: User account [] []. Probable Cause Indicates that user account properties were changed. - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 523
SEC-3032 Message AUDIT, , [SEC-3032], INFO, SECURITY, , , , Event: , Status: success, Info: Switch is configured to database. Probable Cause Indicates that the specified event has occurred to accept - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 524
[SEC-3036], INFO, SECURITY, , , , Event: ipfilter, Status: failed, Info: Failed to save changes for ipfilter policy(s). Indicates that the specified IP filter policy(ies) have not been saved. 476 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 525
Connection Type>. Probable Cause Indicates that a security violation was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the specified protocol connection. Take Action appropriate action as defined by - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 526
81 SEC-3039 478 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 527
Cause Indicates that the simple network management protocol (SNMP) configuration s incorrect and the SNMP service will not work correctly. Recommended Reset the SNMP configuration to default. Action Severity ERROR SNMP-1005 Message AUDIT, , [SNMP-1005], INFO, CONFIGURATION, - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 528
82 SNMP-1006 480 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 529
continue without disruption. Do not fail over or power down the system during firmware upgrade. Run the firmwareDownloadStatus command for more information. Severity that the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 530
failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 531
"Standby CP was not responding. The command is aborted." "firmwareCommit has started on both CPs. Please use firmwareDownloadStatus and firmwareShow to see the firmware status." Status Code 0x65 0x66 0x67 0x68 0x69 0x6a 0x6b 0x6c 0x6d 0x6e 0x6f 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7a - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 532
." 0xa5 "New firmware failed to boot up. Please retry firmwareDownload." 0xa6 "firmwareCommit has started on the blade. This may take up to 10 minutes." 0xa7 "firmwareRestore is entered. System will reboot and a firmwareCommit operation will start 0xa8 upon boot up." "Switch is relocating the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 533
No need to download the same version of firmware." 0xF "Upgrade is inconsistent. Run the bootEnv (root) . Check whether the switch is supported by the requested firmware. Also check firmwareDownload help to restore the original firmware, or contact your service provider for recovery." 0x25 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 534
Device Based Routing policy is not supported by 5.1. Use aptPolicy to change the routing policy before proceeding." 0x2d "Invalid RPM package. Please reload firmware packages on the file server." 0x2e "Cannot downgrade due to presence of blade type 17. Remove or power off these blades before - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 535
firmwareDownload single mode (-s) to upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO Fabric - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 536
remove and re-insert the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1020 Message AUDIT, , [SULB-1020], ERROR, FIRMWARE, , , , New firmware failed to boot in slot - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 537
firmwareDownload command, for example, by powering off and on of the indicated BP blade in the middle of a firmware, firmwareDownload will automatically be restarted on the blade. Run the firmwareDownloadStatus command to monitor the progress. If the problem persists, contact your switch service - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 538
to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , [SULB-1031], WARNING, FIRMWARE, , , , The switch is relocating an internal firmware image. Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 539
to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1037 Message AUDIT, , [SULB-1037], ERROR, FIRMWARE, , , , HCL failed. Reboot the switch manually using the reboot command. However - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 540
83 SULB-1037 Severity Error 492 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 541
Chapter AUDIT ZONE System Messages 84 ZONE-3001 Message AUDIT, , [ZONE-3001], INFO, ZONE, , , , Event: , Status: success, Info: \"\" added to \" - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 542
84 ZONE-3003 ZONE-3003 Message AUDIT, , [ZONE-3003], INFO, ZONE, , , , Event: , Status: success, Info: \"\" deleted. Probable Cause Indicates that the specified zone object has been deleted. The - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 543
84 ZONE-3006 ZONE-3006 Message AUDIT, , [ZONE-3006], INFO, ZONE, , , , Event: , Status: success, Info: Current zone configuration disabled. . Probable Cause Indicates that the current zone configuration has been disabled. - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 544
84 ZONE-3009 ZONE-3009 Message AUDIT, , [ZONE-3009], INFO, ZONE, , , , Event: , Status: success, Info: . Probable Cause Indicates that the specified zone transaction has been aborted. Recommended Verify that the - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 545
84 ZONE-3012 ZONE-3012 Message AUDIT, , [ZONE-3012], INFO, ZONE, , , , Event: , Status: success, Info: Zone object \"\" renamed to \"\". Probable Cause Indicates that the specified zone object - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 546
84 ZONE-3015 ZONE-3015 Message AUDIT, , [ZONE-3015], INFO, FABRIC, , , , Event: , Status: success, Info: AD configurations applied. Probable Cause Indicates that the current admin domain (AD) configuration has been saved to flash is - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 547
84 ZONE-3018 ZONE-3018 Message AUDIT, , [ZONE-3018], INFO, FABRIC, , , , Event: , Status: success, Info: has been deactivated. Probable Cause Indicates that the specified admin domain (AD) object has been - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 548
84 ZONE-3021 ZONE-3021 Message AUDIT, , [ZONE-3021], INFO, FABRIC, , , , Event: , Status: success, Info: AD object \"\" renamed to \"\". Probable Cause Indicates that the specified admin domain ( - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 549
84 ZONE-3024 ZONE-3024 Message AUDIT, , [ZONE-3024], INFO, FABRIC, , , , Command: , Status: success, Info: executed. . Probable Cause Indicates that the admin domain ad --transabort operation was successful in the specified - HP StorageWorks 4/64 | Brocade Fabric OS Message Reference - Supporting Fabric O - Page 550
84 ZONE-3025 502 Fabric OS Message Reference 53-1000437-01
53-1000437-01
15 June 2007
Fabric OS
Message Reference
Supporting Fabric OS v5.3.0