HP StorageWorks 4/64 HP StorageWorks Fabric OS 6.0.1a release notes (AA-RWFMA- - Page 17

Closed defect summary Solution I/O fails when rebooting active CP. Fixed in Fabric OS 6.0.0 Running in a fabric with a non B-Series switch that does not support the ESS command, the B-Series switch eventually runs out of memory. Fixed in Fabric OS 6.0.0 Configdefault does not completely remove all the FCIP tunnels and GigE IP address information. Fixed in Fabric OS 6.0.0 4/256 SAN Director with Fabric OS 5.2.0a -- switch keeps rebooting itself. Fixed in Fabric OS 6.0.0 iswitchd panic when doing data migration using DMM. Fixed in Fabric OS 6.0.0 SANtester traffic does not flow from EOS8 native edge with redundant links to Fabric OS edge: 4 devices per edge. Fixed in Fabric OS 6.0.0 Weblinker died and was restarted due to memory leak. Fixed in Fabric OS 6.0.0 Stressful slot commands testing on a 4/256 SAN Director (large fabric): iswitchd hit an ASSERT and CP rebooted. Fixed in Fabric OS 6.0.0 Auto-negotiation does not bring the ports to the correct maximum speed. Fixed in Fabric OS 6.0.0 I/O Ops failure due to incorrect CUP Port PDCM bit for port 256 after firmwareupgrade from Fabric OS 5.1.x to later releases. Fixed in Fabric OS 6.0.0 4/32B SAN Switch switch CUP Port responds Busy to first command issued and remains busy forever to Host. Fixed in Fabric OS 6.0.0 During large fabric testing with several devices, and under some rare conditions, while performing HotCodeLoad from Fabric OS 5.2.1b Fixed in Fabric OS 6.0.0 to 5.3 on 4/256 SAN Director a few frames were dropped. Web Tools Access Gateway: cannot create user accounts due to error -- AD permission conflict. Fixed in Fabric OS 6.0.0 FR4-18i got faulty 21 due to chip init time out, after slotpoweron and hafailover. Fixed in Fabric OS 6.0.0 Switch sometimes sends 4-byte payload RSCN frame (minimum should be 8 bytes). Fixed in Fabric OS 6.0.0 When 240 VIs and 2 VTs are created, not all of them show up in the name server. Fixed in Fabric OS 6.0.0 Fabric Watch daemon panics while pulling data from temperature sensors. Fixed in Fabric OS 6.0.0 4/256 SAN Director asserts after hafailover, switchdisable. Fixed in Fabric OS 6.0.0 On a specific third-party mainframe, system Poweron/Reset Chpids results in the FR4-18i failing to come online. Fixed in Fabric OS 6.0.0 4/64 SAN Switch constantly rebooting in third-party lab. Fixed in Fabric OS 6.0.0 GID_Ft command rejected from the HBA with a message: FC4-type not registered. Fixed in Fabric OS 6.0.0 Many SFP current and voltage error messages logged on a 4/256 SAN Director. Fixed in Fabric OS 6.0.0 Some backplane ports of a Brocade 4Gb SAN Switch for HP c-Class BladeSystem blade do not work well in a third-party chassis. Fixed in Fabric OS 6.0.0 FCIP configuration functionality should be restored in Fabric OS 5.3.x Web Tools. Fixed in Fabric OS 6.0.0 FICON/CUP hangs in the middle of a Channel Command Word (CCW) chain. Fixed in Fabric OS 6.0.0 HP StorageWorks Fabric OS 6.0.1a release notes 17