HP StorageWorks 4/8 Brocade Fabric OS Message Reference - Supporting Fabric OS
HP StorageWorks 4/8 - SAN Switch Manual
View all HP StorageWorks 4/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 4/8 manual content summary:
- HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 1
53-1000437-01 15 June 2007 Fabric OS Message Reference Supporting Fabric OS v5.3.0 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 2
http://www.brocade.com/support/oscd. Export of technical data contained in this document may require an export license from the United States Government. Brocade Communications Systems, Incorporated Corporate Headquarters Brocade Communications Systems, Inc. 1745 Technology Drive San Jose, CA - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 3
all versions of the Brocade Fabric OS Message Reference hardware support March 2004 Fabric OS System Error Message 53-0000515-09 Updated for v4.4.0, Reference Manual First -Update throughout: rebranding, supported hardware, CLI changes. 15 June 2007 Fabric OS Message Reference iii 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 4
iv Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 5
Event Auditing 2 System Logging Daemon (syslogd 3 System Console 3 Port Logs 4 Viewing and Configuring System Message Logs 4 Viewing System Up a System Message 11 Gathering Information About the Problem 12 Support 12 Panic Dump and Core Dump Files 12 Trace Dumps 13 supportSave Command 13 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 6
-1015 29 AG-1016 29 AG-1017 29 AG-1018 29 AUTH System Messages AUTH-1001 31 AUTH-1002 31 AUTH-1003 31 AUTH-1004 32 AUTH-1005 32 AUTH-1006 32 AUTH-1007 32 AUTH-1008 33 AUTH-1010 33 AUTH-1011 33 vi Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 7
Chapter 4 Chapter 5 AUTH-1012 34 AUTH-1013 34 AUTH-1014 34 AUTH-1016 34 AUTH-1017 35 AUTH-1018 35 AUTH-1020 35 AUTH-1022 36 AUTH-1023 36 AUTH-1025 37 AUTH-1026 37 AUTH-1027 37 AUTH-1028 38 AUTH-1029 38 AUTH-1030 38 AUTH-1031 39 AUTH-1032 39 AUTH-1033 39 AUTH-1034 40 AUTH-1035 40 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 8
Chapter 6 BL-1003 48 BL-1004 48 BL-1006 48 BL-1007 49 BL-1008 49 BL-1009 49 BL-1010 50 BL-1011 50 BL-1012 51 BL-1013 51 BL-1014 51 BL-1015 52 BL-1016 52 BL-1017 53 BL-1018 53 BL-1019 53 BL-1020 54 BL-1021 54 BL-1022 54 BL-1023 55 BL-1024 55 BL-1025 55 BL-1026 55 BL-1027 56 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 9
BM-1004 62 BM-1005 62 BM-1006 62 BM-1007 63 BM-1008 63 BM-1009 63 BM-1054 63 BM-1055 64 BM-1056 64 BM-1058 64 Chapter 8 CDR System Messages CDR-1001 65 CDR-1002 65 CDR-1003 65 CDR-1004 66 Chapter 9 CER System Messages CER-1001 67 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 10
EM-1006 73 EM-1007 73 EM-1008 73 EM-1009 74 EM-1010 74 EM-1011 74 EM-1012 75 EM-1013 75 EM-1014 75 EM-1015 76 EM-1016 76 EM-1017 76 EM-1018 77 EM-1019 77 EM-1028 77 EM-1029 78 EM-1031 78 EM-1033 78 EM-1034 79 EM-1035 79 EM-1036 80 EM-1037 80 EM-1041 80 EM-1042 81 EM-1043 81 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 11
EM-1059 85 EM-1060 85 EM-1061 85 EM-1062 86 EM-1063 86 EM-1064 86 EM-1065 87 EM-1066 87 EM-2003 87 Chapter 12 EVMD System Messages EVMD-1001 89 Chapter 13 FABR System Messages FABR-1001 91 FABR-1002 91 FABR-1003 91 FABR-1004 92 FABR-1005 92 FABR-1006 92 FABR-1007 93 FABR-1008 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 12
104 FABS-1011 104 FABS-1012 104 FABS-1013 105 FABS-1014 105 FABS-1015 105 Chapter 15 FBC System Messages FBC-1001 107 Chapter 16 FCIP System Messages FCIP-1000 109 Chapter 17 FCMC System Messages FCMC-1001 111 Chapter 18 FCPD System Messages FCPD-1001 113 FCPD-1002 113 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 13
Chapter 20 FCR System Messages FCR-1001 117 FCR-1002 117 FCR-1003 117 FCR-1004 118 FCR-1005 118 FCR-1006 118 FCR-1007 118 FCR- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 14
FCR-1039 127 FCR-1040 127 FCR-1041 127 FCR-1042 128 FCR-1043 128 FCR-1048 128 FCR-1049 129 FCR-1053 129 FCR-1054 129 FCR-1055 130 FCR-1056 130 FCR-1057 130 FCR-1058 130 FCR-1059 131 FCR- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 15
Messages FKLB-1001 143 Chapter 23 FLOD System Messages FLOD-1001 145 FLOD-1003 145 FLOD-1004 145 FLOD-1005 146 FLOD-1006 146 Chapter 24 FSPF System Messages FSPF-1001 147 FSPF-1002 147 FSPF-1003 147 FSPF-1005 148 FSPF-1006 148 Chapter 25 FSS System Messages FSS-1001 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 16
Chapter 27 FW System Messages FW-1001 155 FW-1002 155 FW-1003 156 FW-1004 156 FW-1005 156 FW-1006 157 FW-1007 157 FW-1008 157 FW-1009 158 FW-1010 158 FW-1011 158 FW-1012 159 FW-1033 159 FW-1034 159 FW-1035 160 FW-1036 160 FW-1037 160 FW-1038 161 FW-1039 161 FW-1040 161 FW-1041 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 17
Fabric OS Message Reference 53-1000437-01 FW-1117 167 FW-1118 168 FW-1119 168 FW-1120 169 FW-1121 169 FW-1122 169 FW-1123 170 FW-1124 170 FW-1125 170 FW-1126 171 FW-1127 171 FW-1128 172 FW-1129 172 FW-1130 172 FW-1131 173 FW-1132 173 FW-1133 173 FW-1134 174 FW-1135 174 FW-1136 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 18
FW-1173 180 FW-1174 181 FW-1175 181 FW-1176 181 FW-1177 182 FW-1178 182 FW-1179 182 FW-1180 183 FW-1181 183 FW-1182 183 FW-1183 184 FW-1184 184 FW-1185 184 FW-1186 185 FW-1187 185 FW-1188 185 FW-1189 186 FW-1190 186 FW-1191 186 FW-1192 187 FW-1193 187 FW-1194 187 FW-1195 188 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 19
Fabric OS Message Reference 53-1000437-01 FW-1250 193 FW-1251 193 FW-1272 194 FW-1273 194 FW-1274 194 FW-1275 195 FW-1296 195 FW-1297 195 FW-1298 196 FW-1299 196 FW-1300 196 FW-1301 197 FW-1302 197 FW-1303 197 FW-1304 198 FW-1305 198 FW-1306 198 FW-1307 199 FW-1308 199 FW-1309 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 20
FW-1327 205 FW-1328 206 FW-1329 206 FW-1330 206 FW-1331 207 FW-1332 207 FW-1333 207 FW-1334 208 FW-1335 208 FW-1336 208 FW-1337 209 FW-1338 209 FW-1339 210 FW-1340 210 FW-1341 210 FW-1342 211 FW-1343 211 FW-1344 211 FW-1345 212 FW-1346 212 FW-1347 213 FW-1348 213 FW-1349 214 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 21
-1426 227 FW-1427 227 FW-1428 228 FW-1429 228 FW-1430 228 FW-1431 229 FW-1432 229 FW-1433 229 FW-1434 230 FW-1435 230 FW-1436 230 FW-1437 231 FW-1438 231 FW-1439 231 FW-1440 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 22
FW-1441 232 FW-1442 232 FW-1443 232 FW-1444 233 FW-1445 233 FW-1446 233 FW-1500 234 FW-1501 234 Chapter 28 HAM System Messages HAM-1001 235 HAM-1002 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 23
252 HIL-1510 252 HIL-1601 253 HIL-1602 253 Chapter 31 HLO System Messages HLO-1001 255 HLO-1002 255 HLO-1003 255 Chapter 32 HMON System Messages HMON-1001 257 Chapter 33 HTTP System Messages HTTP-1001 259 Fabric OS Message Reference xxiii 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 24
HTTP-1002 259 HTTP-1003 259 Chapter 34 IBD System Messages IBD-1001 261 Chapter 35 IBPD System Messages IBPD-1001 263 IBPD-1002 263 IBPD-1003 263 Chapter 36 ICPD System Messages ICPD-1001 265 ICPD-1002 265 ICPD-1003 265 ICPD-1004 266 ICPD-1005 266 ICPD-1006 266 ICPD-1007 266 ICPD- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 25
ISNS-1003 275 ISNS-1004 276 ISNS-1005 276 ISNS-1006 276 ISNS-1008 277 ISNS-1009 277 ISNS-1010 277 ISNS-1011 277 ISNS-1013 278 ISNS-1014 278 Chapter 41 KSWD System Messages KSWD-1003 279 Chapter 42 KTRC System Messages KTRC-1001 281 KTRC-1002 281 KTRC-1003 281 KTRC-1004 281 KTRC- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 26
Chapter 46 MPTH System Messages MPTH-1001 289 MPTH-1002 289 MPTH-1003 289 Chapter 47 MQ System Messages MQ-1004 291 Chapter 48 MS System Messages MS-1001 293 MS-1002 293 MS-1003 294 MS-1004 294 MS-1005 295 MS-1006 295 MS-1008 295 MS-1009 296 MS-1021 296 MS-1022 296 MS-1023 297 MS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 27
PDTR System Messages PDTR-1001 311 PDTR-1002 311 Chapter 53 PLAT System Messages PLAT-1000 313 PLAT-1001 313 Chapter 54 PORT System Messages PORT-1003 315 PORT-1004 315 PORT-1005 316 Chapter 55 PS System Messages PS-1000 317 PS-1001 317 PS-1002 317 PS-1003 318 PS-1004 318 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 28
Chapter 56 PSWP System Messages PSWP-1001 319 PSWP-1002 319 PSWP-1003 319 Chapter 57 RAS System Messages RAS-1001 321 RAS-1002 321 RAS-1003 321 RAS-1004 322 RAS-1005 322 Chapter 58 RCS System Messages RCS-1001 323 RCS-1002 323 RCS-1003 323 RCS-1004 324 RCS-1005 324 RCS-1006 325 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 29
Chapter 62 SCN System Messages SCN-1001 333 Chapter 63 SEC System Messages SEC-1001 335 SEC-1002 335 SEC-1003 336 SEC-1005 336 SEC-1006 336 SEC-1007 337 SEC-1008 337 SEC-1009 337 SEC-1016 338 SEC-1022 338 SEC-1024 338 SEC-1025 339 SEC-1026 339 SEC-1028 339 SEC-1029 340 SEC-1030 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 30
SEC-1051 346 SEC-1052 346 SEC-1053 346 SEC-1054 347 SEC-1055 347 SEC-1056 347 SEC-1057 348 SEC-1059 348 SEC-1062 348 SEC-1063 349 SEC-1064 349 SEC-1065 349 SEC-1069 349 SEC-1071 350 SEC-1072 350 SEC-1073 350 SEC-1074 351 SEC-1075 351 SEC-1076 351 SEC-1077 352 SEC-1078 352 SEC- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 31
Fabric OS Message Reference 53-1000437-01 SEC-1095 358 SEC-1096 358 SEC-1097 358 SEC-1098 359 SEC-1099 359 SEC-1100 359 SEC-1101 360 SEC-1102 360 SEC-1104 360 SEC-1105 361 SEC-1106 361 SEC-1107 361 SEC-1108 362 SEC-1110 362 SEC-1111 362 SEC-1112 363 SEC-1115 363 SEC-1116 363 SEC- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 32
SEC-1155 370 SEC-1156 370 SEC-1157 370 SEC-1158 371 SEC-1159 371 SEC-1160 371 SEC-1163 372 SEC-1164 372 SEC-1165 372 SEC-1166 373 SEC-1167 373 SEC-1168 373 SEC-1170 374 SEC-1171 374 SEC-1172 374 SEC-1173 375 SEC-1174 375 SEC-1175 375 SEC-1176 375 SEC-1180 376 SEC-1181 376 SEC- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 33
Fabric OS Message Reference 53-1000437-01 SEC-1198 381 SEC-1199 382 SEC-1200 382 SEC-1201 382 SEC-1202 383 SEC-1203 383 SEC-1250 383 SEC-1251 384 SEC-1253 384 SEC-1300 384 SEC-1301 385 SEC-1302 385 SEC-1303 385 SEC-1304 386 SEC-1305 386 SEC-1306 386 SEC-1307 387 SEC-1308 387 SEC- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 34
SEC-1328 393 SEC-1329 393 SEC-1330 393 SEC-1331 394 Chapter 64 SNMP System Messages SNMP-1001 395 SNMP-1002 395 SNMP-1003 395 SNMP-1004 396 SNMP-1005 396 SNMP-1006 396 Chapter 65 SS System - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 35
SULB-1031 410 SULB-1033 410 SULB-1034 411 SULB-1035 411 SULB-1036 411 SULB-1037 411 Chapter 67 SWCH System Messages SWCH-1001 413 SWCH-1002 413 SWCH-1003 413 SWCH-1004 414 SWCH-1005 414 SWCH-1006 414 SWCH-1007 415 SWCH-1008 415 Chapter 68 SYSC System Messages SYSC-1001 417 SYSC- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 36
TRCE-1005 422 TRCE-1006 423 TRCE-1007 423 TRCE-1008 423 TRCE-1009 424 TRCE-1010 424 TRCE-1011 424 TRCE-1012 425 Chapter 71 TRCK System Messages TRCK-1001 427 TRCK-1002 427 TRCK-1003 427 TRCK-1004 428 TRCK-1005 428 TRCK-1006 428 Chapter 72 TS System Messages TS-1001 429 TS-1002 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 37
WEBD-1006 438 WEBD-1007 438 WEBD-1008 439 Chapter 76 ZOLB System Messages ZOLB-1001 441 Chapter 77 ZONE System Messages ZONE-1002 443 ZONE-1003 443 ZONE-1004 444 ZONE-1005 444 ZONE-1006 445 ZONE-1007 445 ZONE-1008 445 ZONE-1010 446 ZONE-1012 446 ZONE-1013 446 ZONE-1014 447 ZONE- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 38
xxxviii ZONE-1037 454 ZONE-1038 454 ZONE-1039 454 ZONE-1040 455 ZONE-1041 455 ZONE-1042 455 ZONE-1043 455 ZONE-1044 456 ZONE-1045 456 ZONE-1046 456 Chapter 78 AUDIT AUTH System Messages AUTH-3001 457 AUTH-3002 457 AUTH-3003 457 AUTH-3004 458 AUTH-3005 458 AUTH-3006 458 AUTH-3007 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 39
SEC-3008 467 SEC-3009 468 SEC-3010 468 SEC-3011 468 SEC-3012 469 SEC-3013 469 SEC-3014 469 SEC-3015 470 SEC-3016 470 SEC-3017 470 SEC-3018 471 SEC-3019 471 SEC-3020 471 SEC-3021 472 SEC-3022 472 SEC-3023 472 SEC-3024 473 SEC-3025 473 SEC-3026 473 SEC-3027 474 SEC-3028 474 SEC- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 40
Chapter 83 AUDIT SULB System Messages SULB-1001 481 SULB-1002 481 SULB-1003 481 SULB-1009 482 SULB-1010 488 SULB-1017 488 SULB-1018 488 SULB-1020 488 SULB-1021 489 SULB-1023 489 SULB-1024 489 SULB-1026 490 SULB-1030 490 SULB-1031 490 SULB-1033 491 SULB-1034 491 SULB-1035 491 SULB- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 41
ZONE-3017 498 ZONE-3018 499 ZONE-3019 499 ZONE-3020 499 ZONE-3021 500 ZONE-3022 500 ZONE-3023 500 ZONE-3024 501 ZONE-3025 501 Fabric OS Message Reference xli 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 42
xlii Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 43
This document is a system message reference manual written to help system administrators and technicians operate, maintain, and troubleshoot SAN products. "About This Document" contains the following sections: • How This Document Is Organized xlvii • Supported Hardware and Software xlvii • What - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 44
• Brocade 48000 director • FA4-16 blade • FC10-6 blade In those instances in which procedures or parts of procedures documented here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 45
user guide , this manual specifically notes hardware, firmware, software, (SAN)- Brocade and industry-specific documentation that you might find helpful. BROCADE RESOURCES The following related documentation is provided on the Brocade Documentation CD-ROM and on the Brocade Web site, through Brocade - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 46
NOTE Go to http://www.brocade.com and click Brocade Connect to register at no cost for a user ID and password. Fabric OS • Fabric OS Administrator's Guide • Fabric OS Command Reference • Fabric OS iSCSI Gateway Service Administrator's Guide • Fabric OS MIB Reference • Fabric OS Message Reference • - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 47
them as they leave the tunnel. Fabric OS supports eight FCIP interswitch links between two Brocade switches (Brocade 7500 or Brocade 48000 with a FR4-18i) or routes. The GbE ports on the FC4-16IP do not support FCIP tunneling. OTHER INDUSTRY RESOURCES For additional resource information - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 48
command output - Detailed description of the problem and specific questions - Description of any troubleshooting steps already performed and results - Serial console and telnet session logs - syslog message logs 2. Switch Serial Number The switch serial number and corresponding bar code are - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 49
Introduction to System Messages 1 This guide supports Fabric OS v5.3.0 and documents system messages that can help you diagnose and fix problems with a switch or fabric. The messages are organized first by event type, reliability, availability, and serviceability log (RASLog) or AUDIT, and - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 50
persistent across power cycles and switch reboots. • By default, the support post-event audtis and problem determination based on high-frequency events of certain types such as security violations, zoning configuration changes, firmware : You can audit any user-initiated security event for all - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 51
on configuring syslogd functionality, refer to the Fabric OS Administrator's Guide. SYSTEM CONSOLE The system console displays messages only through the serial port. If you log in to a switch through the Ethernet port or modem port, you will not receive system console messages. Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 52
, the newest log entries overwrite the oldest log entries. Port logs capture switch-to-device, device-to-switch, switch-to-switch, some device A-to-device B, and control information. Port logs are not persistent and are lost over power cycles and reboots. Run the portLogShow command to display the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 53
Resets the SNMP recipients to default values. agtCfgSet Modifies the POST (Power-On Self-Test) configuration. errClear Clears all error log messages for all switch instances and core dump files. portErrShow Displays the port error summary. portLogClear Clears the port log. If the port log - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 54
commands. This output is used by your switch service provider to diagnose and correct problems with the switch. The output from this command is very seen to slot 0 is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 contain FR4-18i and FA4-18 blades respectively. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 55
, HA State out of sync Type to continue, Q to stop: 2004/07/28-17:04:51, [EM-1055], 3,, WARNING, switch, Media 27: Port media incompatible e. Reason: Configured port speed. Type to continue, Q to stop: CLEARING THE SYSTEM MESSAGE LOG To clear the system message log for a particular - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 56
1-ZONE 2-SECURITY 3-CONFIGURATION 4-FIRMWARE 5-FABRIC 3. Enable the audit 128.128.160 6. Verify the switch's syslog configuration: Dazzler3850:admin> syslogdipshow syslog.1 192.168.163.234 syslog.2 10.128.128 generated on the switch. The RASLog subsystem will support an internationalized - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 57
command. The sequence number is persistent across power cycles and switch reboots. For most messages, this field problem determination. Audit event message format: AUDIT, , [], , , ////. / - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 58
Incorrect password during switch. The RASLog subsystem will support this manual. Firmware Fabric User ID Identifies the user ID. Role Identifies the role of the user switch name. This field displays the defined switch name or the chassis name of the switch. This value is truncated if it is over 16 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 59
used as general guidelines for troubleshooting. For all cases, you in redundant mode unless the failed power supply is replaced or fixed. Problem 12 • Support 12 • Panic Dump and Core Dump Files 12 • Trace Dumps 13 • supportSave Command 13 LOOKING UP A SYSTEM MESSAGE Error messages in this manual - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 60
switch. port (console) logs available? 12. Which CP was master? (only applicable to the Brocade 12000, 24000, or 48000) 13. What and when were the last actions or changes made to the system? SUPPORT Fabric OS create a number of files that can help support personnel troubleshoot and diagnose a problem - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 61
dump files and core files are intended for support personnel use only. TRACE DUMPS The Fabric OS produces trace dumps when problems are encountered trace files, and the output of the supportShow command to an off-switch storage location via FTP. Prior to running the supportSave command, you can - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 62
management error messages are a result of autoleveling firmware upgrades performed by the control processor (CP). Condor application specific integrated circuit (ASIC) driver error messages. This is the core edge routing module on the Brocade director platforms. Status messages for configUpload and - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 63
met, such as a license key, core process ID (PID), and secure mode service is a collection of components grouped together to achieve a modular software architecture. FW is the Fabric Watch module. This module monitors thresholds for many switch license, tunneling, and port related messages. The ISCS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 64
(emd) • EVM daemon (evmd) • Exchange Service Support daemon (essd) • FA-API rpc daemon daemon (secd) • SNMP daemon (snmpd) • Time Service daemon (tsd) • TRACE daemon (traced) • on the status of port links. This database connectivity control unit port (FICON-CUP or interrupt service routine (ISR) - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 65
problems. PORT error messages refer to the front-end user ports on the switch. Front-end user ports are directly accessible by users, to connect end devices or connect to other switches If a switch is not responding, RTWR retries 100 times. Storage application services supporting director-class - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 66
station. Brocade switches support six management entities that can be configured to receive these traps. The supportSave command generates these error messages if problems are encountered. The software upgrade library provides firmwareDownload command capability, which enables firmware upgrades to - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 67
RASLog Messages This section provides the RASLog messages, including: • AG System Messages 25 • AUTH System Messages 31 • BKSW System Messages 45 • BL System Messages 47 • BLL System Messages 59 • BM System Messages 61 • CDR System Messages 65 • CER System Messages 67 • CONF System Messages - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 68
293 • NBFS System Messages 299 • NS System Messages 301 • PDM System Messages 303 • PDTR System Messages 311 • PLAT System Messages 313 • PORT System Messages 315 • PS System Messages 317 • PSWP System Messages 319 • RAS System Messages 321 • RCS System Messages 323 • RPCD System Messages - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 69
• UPTH System Messages 435 • WEBD System Messages 437 • ZOLB System Messages 441 • ZONE System Messages 443 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 70
- HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 71
Audit Log Messages This section provides the Audit messages, including: • AUDIT AUTH System Messages 457 • AUDIT CONF System Messages 461 • AUDIT HTTP System Messages 463 • AUDIT SEC System Messages 465 • AUDIT SNMP System Messages 479 • AUDIT SULB System Messages 481 • AUDIT ZONE System - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 72
- HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 73
be enabled on such ports and they will not respond to NPIV requests. refer to the Access Gateway Administrator Guide, Appendix B for specific AG compatibility requirements. • On non-Brocade switches, refer to the manufacture's documentation to determine whether the switch supports NPIV and how to - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 74
(FLOGI) request from the fabric for N_Port . Probable Cause Indicates that the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the specified N_Port. Recommended Action Please check the configuration of the fabric switch. If the message persists, run supportFtp - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 75
service provider. Severity WARNING AG-1009 Message , [AG-1009], ,, WARNING, , Sending FLOGI failed on N_Port . Probable Cause Failure sending Fabric Login (FLOGI) request from the Access Gateway to the fabric switch. Recommended Action Please - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 76
>, [AG-1011], ,, WARNING, , Sending FDISC failed on N_Port . Probable Cause Indicates failure of sending the discover F_Port service parameter request from the Access Gateway to the fabric switch. Recommended Action Please check the configuration of the fabric - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 77
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1016 Message , [AG-1016], display the status of all ports in the system. Run portCfgShow to display a list of Action ports currently configured as N_Port(s). - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 78
2 AG-1018 Recommended Run switchShow to display the status of all ports in the system. Run portCfgShow to display a list of Action ports currently configured as N_Port(s). Ensure that the host is connected to an F_port. Severity ERROR 30 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 79
Retry the secAuthSecret command. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1003 Message , [AUTH-1003], ,, INFO, , type has been - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 80
run the supportSave command and contact your switch service provider. Severity WARNING AUTH-1007 Message Probable Cause , [AUTH-1007], ,, ERROR, , The proposed authentication protocol(s) are not supported: port . Indicates that the proposed - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 81
sure the local switch supports the specified protocols: problem with the Secure Fabric OS. Recommended Action Reboot or power cycle the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 82
supportSave command and contact your switch service provider. Severity WARNING AUTH-1014 Message , [AUTH-1014], , FFDC, ERROR, , Invalid port value to : port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 83
the supportSave command and contact your switch service provider. Severity ERROR AUTH-1018 Message , [AUTH-1018], ,, ERROR, , Invalid value to check protocol type: port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 84
run the supportSave command and contact your switch service provider. Severity INFO AUTH-1022 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 85
port . Probable Cause Indicates that the authentication process failed to select an authentication value (that is, DH Group, hash value, or protocol type) from a receiving payload for the specified authentication phase. This indicates that the local switch does not support the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 86
your switch service provider. port number>, retval . Probable Cause Indicates that the authentication process failed to get a particular authentication value at certain phase. Data type is the payload or structure that failed to get memory. Recommended Action Usually this problem - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 87
replay attacks. Recommended Action Usually this problem is transient. The authentication might fail. switch service provider. Severity ERROR AUTH-1033 Message , [AUTH-1033], ,, ERROR, , Disable port due to unauthorized switch - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 88
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1035 Message , [AUTH-1035 port . Probable Cause Indicates that the switch received an unexpected authentication message. Recommended Action Usually this problem - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 89
service provider. Severity ERROR AUTH-1039 Message Probable Cause , [AUTH-1039], ,, ERROR, , Neighboring switch has conflicting authentication policy: Port disabled. Indicates that the neighboring switch has a conflicting authentication - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 90
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1042 Message Probable Cause , [AUTH-1042], ,, ERROR, , Port has been disabled, because authentication failed with code ' - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 91
supportSave command and contact your switch service provider. Severity ERROR AUTH- be defaulted to OFF, and switch will port>. Disabling port . Probable Cause Indicates authentication has timed out after multiple retries. The specified port has been disabled as a result. This problem - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 92
3 AUTH-1044 44 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 93
Run the supportSave command to determine if any core files were created. If a core file is found, run supportFtp to send all core files to a secure server location. Copy the error message and any core file information, and contact your switch service provider. Severity WARNING Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 94
4 BKSW-1003 46 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 95
because internal ports were not ONLINE, - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 96
a failure but was not faulted due to a user setting. Recommended Action Reboot or power cycle the blade, using the slotPowerOff and slotPowerOn commands to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 97
CP is healthy. If the standby CP was removed Action or faulted by user intervention, no action is required. Severity INFO BL-1007 Message , [ to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 98
(SFP), or device attached to the specified port. Run the systemVerification command to verify that the blade or switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. On a bladed switch, run the slotPowerOff and slotPowerOn commands. On - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 99
cable, small form-factor pluggable (SFP), or device attached to the specified port. On a bladed switch, run the slotPowerOff and slotPowerOn commands. On a nonbladed switch, reboot or power cycle the switch. If the message persists, replace the blade. Severity ERROR BL-1014 Message Probable - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 100
an excessive number of interrupts that might prove fatal to the switch operation. The port is disabled to prevent the CP from becoming too busy. The bport is the blade port; this number might not correspond to a user port number. Recommended Action Make sure to capture the console output during - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 101
verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer Initializing... Probable Cause Indicates that the slot has started initializing the ports. Recommended No action is required. Action Severity INFO BL-1018 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 102
one or more of the internal ports was not online. The switch is faulted. Recommended Action Reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 103
was reset before the initialization completed. Recommended Action Reboot or power cycle the blade. If the message persists, replace the port offline during warm recovery, state (0x). Indicates that an internal port went offline during the warm recovery of the switch.The switch - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 104
Recommended Action Reboot or power cycle the switch. If the message persists, replace the switch. Severity CRITICAL BL-1029 Message , [BL-1029], ,, INFO, , All ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 105
Indicates that back-end (non-user) ports have not come ONLINE within time limit. Recommended Action Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 106
waiting for disable messages from the user ports after disabling the ports. Recommended Action Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 107
12 = Interrupt overrun • 13 = FDET interrupt • 14 = Interrupt suspended • 15 = Filter LISTD error • 16 = Unknown filter LIST error • 17 = Wait for LPC open state • 18 = Wait for Old port state • 19 = Wait for Open init state • 20 = TX parity error • 21 = RAM parity error • 22 = BISR or RAMINIT error - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 108
6 BLL-1000 If the message persists, replace the blade. Severity CRITICAL 60 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 109
than the AP blade. Recommended Action The problem can be corrected by changing the firmware version on either the control processor (CP) or on disruptive firmware download is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 110
Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1004 Message , [BM-1004], ,, INFO, , Blade firmware - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 111
the affected blade. On the Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1054 Message Probable Cause , [BM-1054], ,, INFO, , AP firmware is not consistent with - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 112
On the Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit switch to persistently enable all ports. Action Severity INFO BM-1058 Message , [BM-1058], ,, WARNING, , Download of AP firmware failed for the switch - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 113
port number> chip faulted due to internal error. Probable Cause Internal error. Recommended For a bladed system, issue the slotPowerOff and slotPowerOn commands on the blade to recover Action the system. For a non-bladed system, perform fastBoot on the switch problem Action persists, replace the blade - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 114
specific integrated circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error occurs, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR 66 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 115
(HA) synchronization between the active and standby control processors (CPs) is broken, because there is downlevel firmware loaded on the standby CP. The standby CP does not support the Advanced Performance Tuning module when the fibre connectivity (FICON) Management Server is enabled. Recommended - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 116
9 CER-1001 68 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 117
Chapter CONF System Messages 10 CONF-1000 Message , [CONF-1000], , AUDIT, INFO, , configDownload completed successfully. . Probable Cause Indicates that the configDownload operation was initiated and completed - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 118
configuration Action again. Severity INFO CONF-1022 Message , [CONF-1022], ,, INFO, , Downloading configuration without disabling the switch was unsuccessful. Probable Cause Indicates that an attempt to download the configuration without disabling the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 119
range of the switch. Refer to the hardware reference manual for the environmental temperature range of your switch. Run the fanShow faulted. Recommended Action On Brocade 24000 and 48000, try reseating the specified FRU. Reboot or power cycle the switch. Fabric OS Message Reference 71 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 120
and an optional number to identify the unit, slot, or port. The Brocade 3250 has one power supply and three fans, and the Brocade 3850 has two power supplies and four fans. Values for the individual fans and power supplies for these switches might display, but these parts cannot be replaced: the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 121
exceeded environmental limits. A reset is sent to the faulty slot or the switch for nonbladed switches. Recommended Action There is most likely a voltage hardware problem on the blade or motherboard of the switch. For the Brocade 24000 and 48000, replace the blade field-replaceable unit (FRU). For - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 122
the FRU. Refer to the Brocade 48000 Hardware Reference Manual for more information about chassisConfig modes and supported blades. Severity CRITICAL EM-1010 ; however, after four seconds it cannot be determined if it has powered down or not. Recommended Try reseating the blade. If this fails - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 123
on the switch. Recommended Action On Brocade 24000 and 48000, try reseating the indicated field-replaceable unit (FRU). If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 124
was discovered when performing consistency checks during a warm boot. Recommended Monitor the switch. If the problem persists, a reBoot or power cycle is required to resolve the Action problem. Severity WARNING EM-1016 Message , [EM-1016], ,, WARNING, - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 125
the current chassisConfig option is not supported by the firmware on the standby control processor (CP problem. The FRU ID value is composed of a FRU type string and an optional number to identify the unit, slot, or port. Recommended Action If the message persists, reboot or power cycle the switch - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 126
is being retried. Probable Cause Indicates that the I2C bus had problems and a timeout occurred. Recommended Action This is often a transient port blade) if the field-replaceable unit (FRU) is intended for use. Refer to the appropriate hardware manual for instructions on inserting the switch - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 127
problems. Refer to the Fabric OS Command Reference for more information on this command. If the message persists, replace the FRU. Severity ERROR EM-1035 Message , [EM-1035], ,, ERROR, , 2 circuit paired Power Supplies are faulty, please check the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 128
-wide name (WWN) card, then default WWN and IP addresses are used for the switch. Recommended Action Reseat the FRU card. If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric OS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 129
responding to commands and should be replaced. Action Severity WARNING EM-1044 Message , [EM-1044], ,, WARNING, , Can't power on , its logical switch is shut down Probable Cause Indicates that the specified field-replaceable unit (FRU) cannot be - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 130
is indicating a predicted failure. If new_state is Down (not enough power), a newly inserted port blade was not powered on because there was not enough power available. Recommended The Brocade 24000 requires only a single power supply for a fully populated chassis; however, you Action should always - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 131
access to the field-replaceable unit (FRU) has become available again. Recommended The EM-1029 error can be a transitory error; if the problem resolves, the EM-1048 message is Action displayed. Severity INFO EM-1049 Message , [EM-1049], ,, INFO, , FRU - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 132
be run at the configured port speed. If the port media is extended long wavelength, move it to a port that can support the heat generated. Severity WARNING if the switch does not reach the reset threshold for the switch/blade. If the reset threshold is reached on the switch/blade, the switch/blade - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 133
Replace the blade. Make sure the replacement is compatible with your switch type. Action Severity CRITICAL EM-1060 Message , [EM-1060 on standby CP. Probable Cause A blade in the system is not supported by the release on the standby control processor (CP). Recommended Action - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 134
reason>. Probable Cause The blade is power off since a hardware (HW) application specific integrated circuit (ASIC) ERROR was detected, and the user has selected to power off the problem blade when such a condition occurred. Recommended Contact support. Action Severity CRITICAL 86 Fabric OS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 135
The previously incompatible Fabric OS or Storage Application Services (SAS) firmware have been upgraded and are now compatible. switches, reboot or power cycle the switch. If the problem persists: • Run the systemVerification command to verify that the switch does not have hardware problems - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 136
11 EM-2003 88 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 137
id.> Probable Cause The event could not be sent to the remote proxy because the remote proxy switch cannot be reached through in-band. Recommended Please make sure that the specified remote domain is present in the fabric. Action Severity WARNING Fabric OS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 138
12 EVMD-1001 90 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 139
Cause Indicates that an internal link service (ILS) information unit of invalid size has been received. The neighbor switch has sent an invalid sized payload. Recommended Action Investigate the neighbor switch for problems. Run the errShow command on the neighbor switch to view the error log for - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 140
switch service provider. Severity WARNING FABR-1004 Message , [FABR-1004], ,, WARNING, , port: - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 141
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1007 Message , [FABR-1007], information unit. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action In case of severe - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 142
message is rare and usually indicates a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FABR-1011 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 143
not enough memory in the switch for the fabric module to allocate. This message is rare and usually indicates a problem with the Fabric OS. switch service provider. Severity CRITICAL FABR-1014 Message , [FABR-1014], , FFDC, ERROR, , Port - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 144
1017], ,, WARNING, , ficonMode is disabled. Probable Cause Indicates that FICON mode is disabled on the switch through a user interface command. Recommended No action is required. Action Severity WARNING FABR-1018 Message , [FABR-1018], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 145
FABR-1019], , FFDC, CRITICAL, , Critical fabric size () exceeds supported configuration (). Probable Cause Indicates that this switch is a value-line switch and has exceeded the limited fabric size: that is, a specified limit to the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 146
, Fabric size () exceeds supported configuration (). Fabric limit timer () started from < the fabric size has exceeded the limit set by your value-line switches. Value-line switches have a limited fabric size: a specified limit to the number - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 147
-number>, FFDC, WARNING, , Maximum number of retries sending ILS from port exceeded. Probable Cause Indicates that fabric exhausted the maximum number of retries sending internal link service (ILS) to the iswitchd demon on the specified E_port. Recommended Run the top - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 148
>running an unsupported FOS version v2.x has joined the fabric. Probable Cause Indicates that a switch with an unsupported Fabric OS version 2.x has joined the fabric. Recommended Remove the switch with the unsupported Fabric OS version 2.x from the fabric. Action 100 Fabric OS Message Reference - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 149
by the software. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1004 Message , [FABS-1004], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 150
power cycle the active CP (for modular systems) or the switch (for single-board systems). If the message persists, run the firmwareDownload command to update the firmware serious Fabric OS data problem on the switch. The possible values for function name and description of problem are: • setSoftState - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 151
object's status field. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1008 Message , [FABS-1008], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 152
an unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1011 Message , [FABS-1011], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 153
the FRU header, or the blade may not be supported by this platform or Fabric OS version. Recommended Action problem. Recommended Action Try removing and reinserting the FRU. Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 154
14 FABS-1015 106 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 155
communicate. Recommended Action The problem can be corrected by changing the version of firmware on the CP or AP blades. The firmware version on the CP firmwareDownload is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 156
15 FBC-1001 108 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 157
Chapter FCIP System Messages 16 FCIP-1000 Message , [FCIP-1000], , FFDC, ERROR, , of GE failed. Please retry the command. Data: inst= st= rsn= fn= oid=< - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 158
16 FCIP-1000 110 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 159
is low on memory and failed to allocate new memory for an information unit (IU). Recommended A nonbladed switch will automatically reboot. For a bladed switch, the active CP blade will Action automatically fail over and the standby CP will become the active CP. Severity CRITICAL Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 160
17 FCMC-1001 112 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 161
Private devices will not respond to the switch port login (PLOGI) during probing. Recommended Action The Brocade 4100, 4900, 5000, 7500, and AP 7600 do not support private loop devices. Refer to the switch vendor for a list of other port types that support private devices for inclusion into the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 162
18 FCPD-1003 114 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 163
-1001], , FFDC, CRITICAL, , : failed, out of memory condition Probable Cause Indicates that the switch is low on memory and failed to allocate new memory for a Fibre Channel driver instance. The function can only be " fc_create". This - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 164
19 FCPH-1001 116 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 165
FCR System Messages 20 FCR-1001 Message , [FCR-1001], ,, INFO, , FC router proxy device in edge created at port . Probable Cause Indicates that a proxy device in the edge fabric has been imported at the specified port. Recommended No action - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 166
20 FCR-1004 FCR-1004 Message , [FCR-1004], ,, INFO, , FC router physical devices offline at port . Probable Cause Indicates that one or more physical devices connected to the specified port have gone offline. Recommended Action Verify that - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 167
20 FCR-1008 Severity INFO FCR-1008 Message , [FCR-1008], ,, INFO, , FC router LSAN zone created at port . Probable Cause Indicates that a logical storage area network (LSAN) zone was created at the specified port in the edge fabric. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 168
20 FCR-1012 Recommended No action is required. Action Severity INFO FCR-1012 Message , [FCR-1012], ,, INFO, , FC Router fabric build completed on port - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 169
to view how many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as zoneShow, zoneRemove, zoneDelete, cfgDelete, and cfgDisable in the edge fabric. Proxy devices can be removed by zoning operations or by bringing - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 170
20 FCR-1021 To do that, perform the following steps: 1. Run portDisable to disable all the EX_Ports that got this error message. 2. Run portDisable to disable all the other EX_Ports on that FCR connected to the same edge fabrics the EX_ports disabled in step 1 are connected to. 3. Use Zoning - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 171
20 FCR-1024 Recommended Action Limit the number of port WWNs required by limiting the remote edge fabric connectivity (which limits the number of translate domains). You can also limit the number of proxy devices for a translate domain (which limits the number of translate domain ports the switch - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 172
20 FCR-1027 FCR-1027 Message , [FCR-1027], ,, INFO, , In slot port WWN roll over. Probable Cause Indicates that the port will occur as a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 173
20 FCR-1030 To avoid WWN conflicts, all EX_Ports attached to fabrics with highly FCR-1032 Message , [FCR-1032], ,, INFO, , Edge fabric enabled security on port in fabric . Probable Cause Indicates that Secure mode was turned on - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 174
20 FCR-1034 Recommended No action is required. Action Severity INFO FCR-1034 Message , [FCR-1034], ,, INFO, , LSAN zone added in - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 175
20 FCR-1038 Recommended No action is required. Action Severity INFO FCR-1038 Message < the number of cfg/zone/alias entries created in a local fabric is greater than the local switch's zone database limitations. Recommended Remove excess cfg/zone/alias entries so that the number of logical - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 176
20 FCR-1042 Probable Cause Indicates that a logical port credits failed. Execute the portEnable command. If the problem persists try rebooting the switch. If the message persists, collect switch information using the supportShow command, and contact your switch service provider. Severity ERROR 128 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 177
link protocol (ELP) command was issued and it is not supported. Recommended Action Run the portEnable and portDisable commands to enable and disable the port. If the problem persists contact your switch service provider. Severity ERROR FCR-1053 Message , [FCR-1053], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 178
20 FCR-1055 FCR-1055 Message , [FCR-1055], ,, INFO, , Switch with domain ID does not support backbone to edge imports. Probable Cause Indicates that a switch that does not support backbone-to-edge routing was detected in the backbone. Edge-to- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 179
20 FCR-1059 Recommended Action Please check the switches on both ends of the link for a possible mismatch in switch or port configuration parameters such as 'Operating Mode', EDTOV, or RATOV. Run the portCfgExport command to modify the appropriate parameters on the local switch. Run the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 180
20 FCR-1062 Recommended No action is required. Action Severity INFO FCR-1062 Message , [FCR-1062], ,, INFO, , Port disabled, system only supports EX/VEX_ports. Probable Cause Indicates that the maximum number of supported - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 181
20 FCR-1066 Probable Cause Indicates that another port on the switch is connected to the same edge fabric with a different fabric ID assignment. Recommended Change the port fabric ID to same value as the other ports connected to the edge fabric using the Action portCfgExport or portCfgVexport - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 182
is set to default by user. This removes all prior FC Routing configurations. Recommended No action is required. Action Severity INFO FCR-1071 Message , [FCR-1071], ,, INFO, , Port is changed from non FCR port to FCR port. Probable Cause - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 183
Recommended No action is required. Action Severity INFO 20 FCR-1072 Fabric OS Message Reference 135 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 184
20 FCR-1073 FCR-1073 Message , [FCR-1073], ,, INFO, , Switch with domain ID in fabric has lower limit of LSAN Zones supported. Probable Cause Indicates that a switch in the backbone/edge that supports firmware, which only supports - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 185
20 FCR-1076 FCR-1076 Message , [FCR-1076], ,, ERROR, , Port disabled, system only supports front domains. Probable Cause Indicates that the maximum number of supported front domains was exceeded. To enable the specified port, - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 186
20 FCR-1076 138 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 187
The error variable is an internal error number. Recommended Action If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a nonbladed switch, download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference for - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 188
port (FICON-CUP). The pid_format variable displays the PID format currently running on the fabric, and is one of the following: • 0 is VC-encoded PID format • 1 is core PID format • 2 is extended-edge Guide for information on core port (FICON-CUP) daemon failed. Recommended Download a new firmware - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 189
transient problem. Recommended Action If the message persists, check the memory usage on the switch, run the supportSave command and contact your switch service provider. Severity WARNING FICU-1008 Message < to port address conflict or port address being reserved for CUP management port. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 190
-1010 FICU-1010 Message , [FICU-1010], ,, WARNING, , FMS Mode enable failed due to address conflict with port . Probable Cause Indicates that the fibre connectivity FICON Management Server mode (fmsMode) was not enabled because the specified - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 191
Chapter FKLB System Messages 22 FKLB-1001 Message , [FKLB-1001], ,, WARNING, , exchange overlapped, pid= Probable Cause Indicates that the FC kernel driver has timed out the exchange while the application is still active. When the FC kernel - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 192
22 FKLB-1001 144 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 193
, FFDC, WARNING, , Unknown LSR type: port , type Probable Cause Indicates that the link that the LSU size exceeds what the system can support. Recommended Reduce the number of switches in the fabric or reduce the number of redundant - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 194
23 FLOD-1005 FLOD-1005 Message , [FLOD-1005], ,, WARNING, , Invalid received domain ID: Probable Cause Indicates that the received LSR contained an invalid domain number. Recommended No action is required; the LSR is discarded. Action - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 195
Chapter FSPF System Messages 24 FSPF-1001 Message , [FSPF-1001], ,, ERROR, , Input Port out of range Probable Cause Indicates that the specified input port number is out of range; it does not exist on the switch. Recommended No action is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 196
than 0 is incompatible in a fabric of Brocade switches. Disconnect the offending switch. Severity ERROR FSPF-1006 Message , [FSPF-1006], ,, ERROR, , FSPF Version not supported, input port = Probable Cause Indicates that the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 197
persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSS-1002 Message , [FSS-1002], ,, WARNING, , Component () sending too - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 198
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR FSS-1005 Message , [FSS-1005], ,, WARNING, , FSS read failure Probable Cause - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 199
eth1 (as root) or run supportShow/supportSave to validate the network configuration; then try to restore the synchronization by issuing the haSyncStart command. If the problem persists, contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 151 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 200
25 FSS-1007 152 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 201
Recommended Action If this message was logged as a result of a user-initiated action (such as running the switchReboot command), then no problem. If the problem persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 202
version in HA synchronization. Probable Cause Indicates that the active control processor (CP) and the standby CP in a dual CP system are running firmware that are incompatible with each other. If the active CP fails, the failover will be disruptive. In a non-bladed system, this message is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 203
user installation. Typically, low temperatures means that the fans and airflow of a switch are functioning normally. Verify that the location temperature is within the operational range of the switch. Refer to the hardware reference manual for the environmental temperature range of your switch - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 204
is . Probable Cause Indicates that the internal temperature of the switch has changed from a value outside of the acceptable range to a value within problems. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 205
is . Probable Cause Indicates that the speed of the fan has fallen below the low boundary. Fan problems typically contribute to temperature problems. Recommended Consistently abnormal fan speeds generally indicate that the fan is failing. Replace the fan Action field-replaceable unit - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 206
that it is seated correctly in the chassis. Run the psShow command to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 Message , [FW-1010], ,, WARNING, , , is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 207
>). Current value is . Probable Cause Indicates that the power supply counter changed from a value outside of the acceptable range to a message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1033 Message , [FW-1033], < - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 208
, , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The receive performance area measures the amount of incoming laser to help you - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 209
=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has fallen below the low boundary. particular policy of the Action end-user installation. Severity INFO Fabric OS Message Reference 161 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 210
Label>, is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has fallen below the low boundary. The transmit performance area measures the amount of outgoing laser - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 211
Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has changed from a message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1045 Message , [FW-1045], < - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 212
acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1049 Message , [FW-1049], ,, INFO, , , value has changed(High= - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 213
a value within the acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO Fabric OS Message Reference 165 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 214
caused by transient errors. A low number of E_Port failures means that the switch is functioning normally. Recommended No action is required. Respond to this message message as is appropriate to the particular policy of the end-user installation. Check both ends of the physical connection and verify - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 215
to the particular policy of the Action end-user installation. Severity INFO FW-1117 Message , following actions can cause a fabric reconfiguration: • two switches with the same domain ID have connected to one another troubleshooting. Severity INFO Fabric OS Message Reference 167 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 216
following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one to the particular policy of the Action end-user installation. Severity INFO FW-1119 Message , troubleshooting. Severity INFO 168 Fabric OS Message Reference 53- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 217
has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1122 Message , [FW-1122], ,, INFO, , , is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 218
to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 219
two switches. • Incompatible link parameters. During E_Port initialization, ports ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 220
the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1130 Message , [FW-1130], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 221
message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1132 Message , [FW-1132], that the number of fabric logins has changed. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 222
fabric logins has fallen below the low boundary. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1136 Message , [FW-1136], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 223
this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1138 Message , [FW-1138], < or removed. A low number of SFP state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 224
physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. A low number of link loss errors means that the switch is functioning normally - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 225
user installation. Severity INFO FW-1164 Message Probable Cause Recommended Action , [FW-1164], ,, INFO, , - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 226
that the number of synchronization losses that the port experiences has fallen below the low boundary. end-user installation. A low number of synchronization losses means that the switch is synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 227
the port experiences has changed. Loss of signal generally indicates a physical problem. problem. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of signal loss errors means that the switch - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 228
of the end-user installation. Frequent loss of signal generally indicates a physical problem. Check both ends that the number of protocol errors that the port experiences has fallen below the low boundary. to hardware problems. A low number of protocol errors means that the switch is functioning - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 229
the Action end-user installation. Severity INFO FW-1176 Message , [FW-1176], ,, INFO, , , < number of invalid words that the port experiences has changed. Invalid words usually indicate a hardware problem with an small form-factor pluggable - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 230
invalid words that the port experiences has fallen below the low boundary. Invalid words usually indicate a hardware problem with an small form switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 231
that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has fallen below the low boundary. Recommended No action is the particular policy of the Action end-user installation. A low number of invalid CRCs means that the switch is functioning normally. Severity INFO FW- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 232
Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1185 Message , [FW-1185], ,, INFO, , , , is below low boundary(High=, Low=). Current value is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 233
. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1188 Message , [FW-1188], ,, INFO, , , , value has changed(High=, Low=). Current value is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 234
. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1190 Message , [FW-1190], ,, INFO, , , , is above high boundary(High=, Low=). Current value - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 235
. A low number of port state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1194 Message , [FW-1194], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 236
a trunk port. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. numbers of messages indicate a problem in this area. A low level of invalid CRC errors means that the switch is functioning normally. 188 Fabric - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 237
this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1218 Message , [FW-1218], < this area. Only five-figure (or higher) values for CRC errors indicate problems. When an "above" message is received, check for a faulty cable or - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 238
fluctuations, and aging equipment. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of CRC errors means that the fabric is functioning normally. The CRC error area of the End-to-End Performance - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 239
that the number of end-to-end (EE) word frames that the switch receives has changed. Receive performance messages appear due to the number of word message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1245 Message , [FW-1245], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 240
message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1248 Message , [FW-1248], < that the number of end-to-end (EE) word frames that the switch transmits has changed. Transmit performance messages appear due to the number of word - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 241
that the number of end-to-end (EE) word frames that the switch transmits has fallen below the low boundary. Transmit performance messages appear due to message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1250 Message , [FW-1250], < - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 242
changed. The port has received small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 243
or commands that the port receives has changed from a value outside of the appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1296 Message , authorized to establish telnet connections to switches in the fabric. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 244
(IP) addresses that are authorized to establish telnet connections to switches in the fabric. Recommended Action Run the errShow command to sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 245
IP) addresses that are authorized to establish browser connections to the switches in the fabric. Recommended Action Run the errShow command to sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 246
(IP) addresses that are authorized to establish API connections to switches in the fabric. Recommended Action Run the errShow command to determine sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 247
(IP) addresses that are authorized to establish API connections to switches in the fabric. Recommended No action is required. Action Severity sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 248
Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING FW-1311 Message , [FW-1311], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 249
Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING FW-1315 Message , [FW-1315], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 250
to security class messages depend on user policies. Consult your security administrator an small computer system interface (SCSI) Enclosure Services (SES) request has been received from an The SES_POLICY contains a list of WWNs of device ports that are allowed to access the SES Server functionality - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 251
an small computer system interface (SCSI) Enclosure Services (SES) request has been received from an MS_POLICY contains a list of WWNs of device ports that are allowed to access the Management Server to security-class messages depend on user policies. Consult your security administrator for - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 252
. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial port access is enabled. Recommended Action Run the errShow command to determine the WWN of the device that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 253
. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial port access is enabled. Recommended Action Run the errShow command to determine the WWN of the device that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 254
panel request has been received. The FRONTPANEL_POLICY contains a list of switch world-wide names (WWNs) for which front panel access is that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 255
. The SCC_POLICY contains a list of switches by world-wide name (WWN) that are allowed to be members of a fabric. Recommended Action Run the errShow command to determine the WWN of the device that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 256
done through the name server. Recommended Action Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity INFO 208 Fabric OS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 257
through the name server. Recommended Action Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 258
the specification of rules for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a the login attempt. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 259
timestamp. The receiving switch compares this timestamp to its current time. If the difference is too great, it rejects the packet. This counter keeps track of packets rejected due to invalid timestamps. Recommended Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 260
timestamp. The receiving switch compares this timestamp to its current time. If the difference is too great, it rejects the packet. This counter keeps track of packets rejected due to invalid timestamps. Recommended Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 261
with the public key of the primary FCS switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid signatures. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 262
with the public key of the primary FCS switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid signatures. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 263
is signed by the Root CA recognized by the receiving switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 264
is signed by the Root CA recognized by the receiving switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 265
the low boundary. Authentication failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails is segmented. This counter keeps track of the number - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 266
The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port IDs. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 267
value is . Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has risen above the high boundary IDs. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 268
value is . Probable Cause Indicates that the number of time service (TS) out-of-sync violations has changed. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies. Severity INFO - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 269
is . Probable Cause Indicates that the number of time service (TS) out-of-sync violations has changed from a value outside of the switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 270
fabric, but it still has the WWN of the last primary FCS switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 271
only to another switch that is in secure mode and has a compatible security database. A compatible security database means that the version stamp and fabric configuration server (FCS) policy matches exactly. Recommended Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 272
. The counter increments every time someone issues one of these commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies. Severity INFO FW-1377 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 273
these commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 274
can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1424 Message , [FW-1424], ,, WARNING, , Switch status changed from - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 275
as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1426 Message , [FW-1426], ,, WARNING, , Switch status change contributing factor Power supply: bad, absent. Probable Cause - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 276
27 FW-1428 FW-1428 Message , [FW-1428], ,, WARNING, , Switch status change contributing factor Power supply: absent. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of missing - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 277
level of firmware to both CPs. Replace any faulty CPs. If you reset the micro-switch (the latch on the CP blade) on the active CP before the heartbeat was up on a power cycle, and the CPs came up non-redundant, then you should reboot the CPs again to clear the problem. Severity WARNING - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 278
Switch status change contributing factor Marginal ports: marginal ports. (Port(s) ) Probable Cause Indicates that the switch cyclic redundancy check (CRC) error, Port state change or Buffer Limited Port is above the high boundary. Recommended - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 279
FW-1437 Message , [FW-1437], ,, WARNING, , Switch status change contributing factor faulty ports: . (Port(s) . Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 280
unit (FRU) has changed to "inserted". This means that an FRU is inserted but not powered on. Recommended No action is required. Verify that the event was planned. Action Severity INFO FW . Verify that the event was planned. Action Severity INFO 232 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 281
for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to number of power supplies. So those values will not be automatically changed. The default values with no AP blades are: 3 out of service indicates switch status is DOWN, 0 indicates no - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 282
27 FW-1500 FW-1500 Message , [FW-1500], ,, WARNING, , Mail overflow - Alerts being discarded. Probable Cause Indicates that mail alert overflow condition has occurred. Recommended Resolve or disable the mail alert using the fwMailCfg command. Action - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 283
standby CP blade by ejecting the card and reseating it. If the problem persists, replace the standby CP. Severity CRITICAL HAM-1002 Message , This message records switch processor reboot reasons that were initiated by the user or the switch errors. The switch processor reboots can be - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 284
28 HAM-1005 • Unknown • Fastboot • Giveup Master:SYSM • CP Faulty:SYSM • FirmwareDownload • ConfigDownload:MS • ChangeWWN:EM • Reboot:WebTool • Fastboot:WebTool • Software Fault:Software Watchdog • Software Fault:Kernel Panic • Software Fault:ASSERT • Reboot:SNMP • Fastboot:SNMP • Reboot • Chassis - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 285
28 HAM-1006 Recommended The standby CP will take over and reset the active CP.The system will be non-redundant as the Action standby becomes the active CP. Severity CRITICAL Fabric OS Message Reference 237 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 286
28 HAM-1006 238 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 287
recovery. RUn supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL HAMK-1002 Message , [HAMK-1002], ,, INFO, , Heartbeat down. Probable Cause Indicates - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 288
29 HAMK-1004 HAMK-1004 Message ,[HAMK-1004], ,, INFO, , Resetting standby CP (double reset may occur). Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. This message is typically seen when the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 289
Replace the faulty blade or switch (for nonbladed switches). Action Severity ERROR HIL-1102 power supply status. Try to reseat the faulty fan field-replaceable unit (FRU) and power supply FRU to verify that they are seated properly. If the problem persists, replace the fan FRU or the power - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 290
, and 4024 the entire switch must be replaced, because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100, 4900, 5000, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 291
, and 4024 the entire switch must be replaced, because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100, 4900, 5000, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 292
. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command to monitor the speed of the fan generating this error. If the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 293
problem can quickly cause the switch to overheat. This message is specific to nonbladed switches and is not applicable to the Brocade 24000, or 48000. Recommended For the Brocade operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 294
-replaceable unit (FRU) has failed or has been removed. This message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Replace the affected fan FRU immediately. Action Severity WARNING HIL-1302 Message , [HIL-1302], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 295
30 HIL-1305 Severity ERROR HIL-1305 Message , [HIL-1305], ,, ERROR, , One or two fan(s) failed. Replace failed fan FRUs immediately. Probable Cause Indicates that multiple fan field-replaceable units (FRUs) have failed. This message is often preceded by - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 296
have failed. This message is often preceded by a low fan speed message. Recommended Since the fans are not field replaceable, replace the switch if the temperature is high. Action Severity WARNING HIL-1311 Message , [HIL-1311], ,, INFO, , No fans are - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 297
30 HIL-1402 Probable Cause Indicates that one fan field-replaceable unit (FRU) has been removed. Recommended Install the missing fan FRU. Action Severity WARNING HIL-1402 Message , [HIL-1402], ,, WARNING, , Two fan FRUs missing. Install fan FRUs - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 298
sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the blade. Severity CRITICAL HIL-1503 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 299
. To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 300
. To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 301
. Try rebooting or power cycling the switch. Severity ERROR HIL-1602 Message , [HIL-1602], , FFDC, CRITICAL, , Multiple temperature sensors failed. Service immediately. Probable Cause Indicates that temperature readings from multiple sensors are out - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 302
30 HIL-1602 254 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 303
HLO-1003], , FFDC, ERROR, , Invalid Hello received from port , Domain = , Remote Port =. Indicates that the HLO message received was invalid and the frame was dropped. The Brocade switch will not accept FSPF frames from the remote - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 304
an invalid HLO because either the domain or port number in the HLO message has an invalid value. This error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The HLO message of the remote switch must be compatible with the value specified in - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 305
Action Run the firmwareDownload command to reinstall the firmware to your switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 257 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 306
32 HMON-1001 258 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 307
HTTP-1001], ,, INFO, , Switch PIDformat has changed to . Probable Cause Guide. Severity INFO HTTP-1002 Message , [HTTP-1002], , AUDIT, INFO, , Zoning transaction initiated by User: , Role: - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 308
33 HTTP-1003 260 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 309
Indicates that the specified port has crashed unexpectedly and restarting attempts have failed. Recommended Power off and power on the blade using the slotPowerOff and slotPowerOn commands. On the Action Brocade 7500 or 7600, switch off and on all primary power in order to power-cycle the unit - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 310
34 IBD-1001 262 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 311
-name>, iSCSI login sessions exceed the maximum limit at slot port ge Probable Cause Indicates that the iSCSI login sessions exceed the supported limit per port. Recommended Use another port to login. Action Severity WARNING Fabric OS Message Reference 263 53-1000437 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 312
35 IBPD-1003 264 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 313
or power cycle the switch. Severity ERROR ICPD-1002 Message , [ICPD-1002], ,, ERROR, , Failed to initialize rc = . Probable Cause Indicates that an initialization of a module within the ICPD failed. Recommended Download a new firmware - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 314
ICPD-1007 Message , [ICPD-1007], ,, INFO, , iSNSC service is on the switch. Probable Cause Indicates that the iSNSC service is enabled or disabled on the switch. Recommended No action is required. Action Severity INFO 266 Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 315
36 ICPD-1008 ICPD-1008 Message , [ICPD-1008], ,, INFO, , iSCSI switch () is . Probable Cause Indicates that the iSCSI switch is reachable or unreachable. Recommended No action is required. Action Severity INFO Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 316
36 ICPD-1008 268 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 317
> Probable Cause Indicates that a change in gateway IP address has occurred. If the source of the address change is manual, this means that the address change was initiated by a user. If the source of the address change is the dynamic host configuration protocol (DHCP). This means that the address - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 318
37 IPAD-1001 270 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 319
a transient problem. Recommended Action If the message persists, check the memory usage on the switch, using the switch service provider. Severity WARNING IPS-1004 Message , [IPS-1004], ,, WARNING, , Port Config Mode Mismatch slot () port(ge - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 320
WARNING IPS-1005 Message , [IPS-1005], ,, WARNING, , Tunnel Authorization Failure for slot () port(ge) tunnel ID() reason () Probable Cause Indicates that tunnel setup failed due to authorization failure from the remote - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 321
[ISCS-1000], ,, ERROR, , Slot Port GE crashed unexpectedly. Probable Cause Indicates that specified port has crashed. Recommended No action is required; the port will restart automatically. Action Severity ERROR Fabric OS Message Reference - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 322
39 ISCS-1000 274 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 323
name>, Start peering with external iSNS server slot/port /ge. Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS) server. Recommended No action is required. Action Severity INFO ISNS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 324
-register with external iSNS server slot/port /ge. Probable Cause Indicates that the user has requested a re-register with the specified external internet storage name service (iSNS) server. Recommended No action is required. Action Severity INFO - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 325
with a valid slot/port. Refer to the appropriate hardware reference manual for valid slot and Action port ranges. Severity WARNING ISNS-1011 Message Probable Cause Recommended Action , [ISNS-1011], ,, INFO, , iSNS Client Service is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 326
Start peering with external iSNS server on management port. Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS) on the management port. Recommended No action is required. Action Severity INFO 278 Fabric OS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 327
supportSave command to determine, if any core files were created. If a core file is found, run supportFtp to send all core files to a secure server location. Copy the warning message along with any core file information, and contact your switch service provider. Severity WARNING Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 328
41 KSWD-1003 280 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 329
Chapter KTRC System Messages 42 KTRC-1001 Message , [KTRC-1001], ,, WARNING, , Dump memory size exceeds dump file size Probable Cause Indicates that the dump memory size has exceeded the dump file size. Recommended No action is required. Action - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 330
42 KTRC-1005 Recommended No action is required. Action Severity ERROR KTRC-1005 Message , [KTRC-1005], ,, ERROR, , Trace initialization failed. . . Probable Cause Indicates that Trace was unable to - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 331
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING LOG-1002 Message , [LOG-1002], , FFDC, WARNING, , A log message was dropped - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 332
43 LOG-1003 LOG-1003 Message , [LOG-1003], ,, INFO, , The log has been cleared. Probable Cause Indicates that the persistent error log has been cleared. Recommended No action is required. Action Severity INFO 284 Fabric OS Message Reference 53- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 333
valid link state ID is the same as the valid domain ID, whose range is from 1 through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity ERROR LSDB-1002 Message , [LSDB-1002], ,, INFO, - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 334
domain Probable Cause Indicates that there is no link state record for the specified local domain. Recommended No action is required. The other switch will pass the LSD when the fabric has become stable. Action Severity WARNING 286 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 335
switch service provider. Severity ERROR MFIC-1002 Message , [MFIC-1002], ,, INFO, , Chassis FRU header not programmed for switch NID, using defaults storage. The default values are used. The Switch NID is used only in the following SB ELS frames: Request - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 336
to Probable Cause Indicates that one or more switches joined the fabric with a different insistent domain ID (IDID) mode ". Recommended Action IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with the same IDID mode as the fabric. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 337
Chapter MPTH System Messages 46 MPTH-1001 Message , [MPTH-1001], , FFDC, ERROR, , Null parent, lsId = Probable Cause Indicates that a null parent was reported. MPATH uses a tree structure in which the parent is used to connect to the root of - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 338
46 MPTH-1003 290 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 339
• 7 - MSG_LINIT_IU • 8 - MSG_RSCN • 9 - MSG_IOCTL • 10 - MSG_ACCEPT • 11 - MSG_IU_FREE • 12 - MSG_US • 13 - MSG_EXT_RSCN • 14 - MSG_RDTS_START • 15 - MSG_RDTS_SENDEFP • 16 - MSG_RDTS_RESET Recommended No action is required. Action Severity ERROR Fabric OS Message Reference 291 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 340
47 MQ-1004 292 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 341
. Recommended Action: Set the flag for the MS Platform Service. • The GCAP (MS Get Capabilities) is not supported by another switch. Recommended Action: Upgrade the firmware level on the switch to a level that supports RCS. • The request to the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 342
by> Run the firmwareDownload command to upgrade the firmware level on the switch to a level that supports RCS. RCS is supported in Fabric OS v2.6, v3.1 and greater transfers; then run the supportSave command and contact your switch service provider. Severity INFO MS-1004 Message , [MS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 343
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR MS-1008 Message , [MS-1008], ,, ERROR, , MS Failure while initializing - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 344
, RLIR event. Switch Port ID is . Device Port Tag is . . Probable Cause A RLIR incidents are likely due to SAN hardware problems such as bad cables, small the Action supportSave command and contact your switch service provider. Severity ERROR MS-1022 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 345
, [MS-1023], ,, INFO, , Management Server Topology Discovery Service Probable Cause Indicates that Management Server Topology Discovery Service is being enabled or disabled. Recommended No action is required. Action Severity INFO MS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 346
48 MS-1024 298 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 347
Wait • 5 - Full If this error occurs repeatedly, it means the protocol implementation between two connected switches has problems. Recommended Action Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is FULL, then this message can safely be ignored - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 348
set in state , input , port Probable Cause Indicates that the database transmit set flag 5 - Full Recommended No action is required. The Fabric OS auto recovers from this problem. Action Severity WARNING 300 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 349
can handle. Recommended Action Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, or v3.2 or higher, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly. You can also reduce the number of devices - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 350
>, can't sync. Probable Cause Indicates that the name server on the standby CP has lower supported capability than the active CP due to different firmware versions running on the active and standby CPs. This means that the active and standby CPs are out of sync. Any execution of the haFailover - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 351
. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 303 53 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 352
PDM) process ran out of memory. Recommended Action Reboot or power cycle the switch. If the message persists, run supportFtp (as needed) firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 353
. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 305 53 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 354
. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1012 Message , [PDM - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 355
the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service ], ,, WARNING, , Failed to download area port map. Fabric OS Message Reference 307 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 356
is not supported by older firmware. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 357
51 PDM-1024 Fabric OS Message Reference 309 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 358
51 PDM-1024 310 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 359
written to the panic dump files. The watchdog register codes are as follows: • 0x10000000 bit set means that the watch dog timer (WDT) forced a core reset. • 0x20000000 bit set means that the WDT forced a chip reset. • All other code values are reserved. Recommended Run the pdShow command to view - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 360
52 PDTR-1002 312 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 361
-line prompt. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PLAT-1001 Message , [PLAT-1001], ,, INFO, , Resetting standby CP (double reset may - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 362
53 PLAT-1001 314 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 363
> Faulted because of many Link Failures Probable Cause Indicates that the specified port is now disabled because the link on this port had multiple failures that exceed an internally set threshold on the port. This problem is typically related to hardware. Recommended Action Check and replace (if - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 364
portCfgLport to clear configuration. Probable Cause Indicates that the specified port is configured to be an L_port, but that port does not support L_port. If an L_port is connected, then the port will be disabled because it does not support L_port. If an E_port or F_port is connected then the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 365
automatically. If it does not, reboot or power cycle the switch to Action reinitiate the firmware. Severity CRITICAL PS-1001 Message , Recommended No action is required. Refer to the Fabric OS Administrator's Guide for more information about the Action PID format. Severity INFO PS- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 366
the restoring configuration has attempted to set the end-to-end monitoring mask on at least one ISL port. Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is Action enabled. ISL monitoring can only be disabled through the Fabric Access API - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 367
INFO PSWP-1003 Message , [PSWP-1003], ,, INFO, , Port Swap feature disabled. Probable Cause Indicates that the portSwap feature has been disabled in the switch. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 319 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 368
56 PSWP-1003 320 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 369
Cause Indicates that the maximum storage size for FFDC data capture is reached. Recommended Run the supportSave command and contact your switch service provider. Action Severity WARNING RAS-1003 Message , [RAS-1003], ,, WARNING, , Audit message log is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 370
>, Software 'verify' error detected. Probable Cause Indicates a internal software error. Recommended Run the supportSave command and contact your switch service provider. Action Severity WARNING RAS-1005 Message , [RAS-1005], , FFDC, WARNING, , Software - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 371
and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity INFO RCS-1002 Message , [RCS . Check memory usage on the switch using the memShow command. Reboot or power cycle the switch. Severity ERROR Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 372
in Fabric OS v2.6, v3.1 and greater, v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS-1005], ,, INFO, , Phase , - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 373
remote domain rejected an RCS phase initiated by an application on the local switch. If the reject phase is ACA, the remote domain might be busy and might not be compatible or the domain does not have the license to support that application. Recommended Action If the reject is in ACA phase, wait - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 374
58 RCS-1008 326 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 375
IP address has faulty credentials. Recommended Enter the correct user name and password from the Fabric Access API host. Action Severity WARNING RPCD Probable Cause Indicates that the SSL certificate file configured on the switch could not be accessed because root did not have read-level access - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 376
, , Permission denied accessing private key file. Secure RPCd is disabled. Probable Cause Indicates that the private key file configured on the switch could not be accessed because root did not have read-level access. Recommended Change the file system access level for the private key - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 377
Possible detail values include: • RTWRTransmit: Max retries exhausted • detail1: Port • detail2: Domain • detail3: Retry Count • detail4: Status fabricShow command to see if the specified domain ID is online. Enable the switch with the specified domain ID. If the message persists, run supportFtp (as - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 378
ID is reachable. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO 330 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 379
61 SAS-1001 Message , [SAS-1001], ,, ERROR, , string description of command which failed> of GE failed. Please retry the command. Data inst= st= rsn= fn= oid - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 380
61 SAS-1001 332 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 381
busy, the condition is temporary. If this message is caused by a hung daemon, the software watchdog will cause the daemon to dump the core and reboot the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 382
62 SCN-1001 334 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 383
. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1002 Message , [SEC-1002], ,, ERROR, , Security data fails: - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 384
Action If the message is the result of a user command, retry the statistic command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING 336 Fabric OS Message Reference - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 385
was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the HTTP connection. Action Severity INFO SEC-1009 Message , [SEC-1009], ,, INFO, , Security violation - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 386
and verify that all public key infrastructure (PKI) objects exist on the switch. If the private key does not exist, follow the steps for re- creating PKI objects, outlined in the Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the certificate - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 387
fabric configurations server (FCS) distributes the security database to the other switches in the fabric, then local validation finds the error in the fabric configurations server (FCS) distributes the security database to the other switches in the fabric, then local validation finds the error in the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 388
error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1031 Message , [SEC-1031], ,, WARNING, , Current security policy DB cannot be supported by standby. CPs will go out of sync. Probable Cause Indicates - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 389
command. Only the secPolicyCreate command supports use of the asterisk for adding switches to policies. Recommended Action Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the switch connection control (SCC) policy. Refer - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 390
world-wide name (WWN) entered in the policy member list had an invalid format. Recommended Run the command again using the standard WWN format, 16 hexadecimal digits grouped as eight Action colon separated pairs. For example: 50:06:04:81:D6:F3:45:42. Severity ERROR SEC-1038 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 391
Severity ERROR SEC-1041 Message , [SEC-1041], ,, ERROR, , Invalid port member in portlist (). . Probable Cause Indicates that the port member is invalid for one of the following reasons: • The value is not a number. • The - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 392
SEC-1045], ,, ERROR, , Too many port members. Probable Cause Indicates that there has been a corruption during the configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 393
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 394
list . Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 395
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 396
configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in either that no domains or domains more than the maximum number supported are specified. Recommended Enter the correct number of domains. Action - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 397
. Probable Cause Indicates that the public key infrastructure (PKI) objects on the switch are not in a valid state and the signature operation failed. Recommended Run the Action command and contact your switch service provider. Severity ERROR Fabric OS Message Reference 349 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 398
. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity ERROR SEC-1073 Message , [SEC-1073], ,, ERROR, , No FCS policy in list! Probable - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 399
not allowed in non-secure mode is attempted, do not perform the operation in non-secure mode. In secure mode, run the command from a switch that has required privilege, that is, either a backup FCS or primary FCS. Severity ERROR SEC-1075 Message , [SEC-1075], ,, ERROR - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 400
63 SEC-1077 SEC-1077 Message , [SEC-1077], ,, ERROR, , Failed to activate new policy set on all switches. Probable Cause Indicates that the policy could not be activated. Possible reasons that the policy could not be activate include not enough memory or - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 401
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 402
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 403
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 404
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 405
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 406
fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the Action supportSave command and contact your switch service provider. Severity ERROR 358 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 407
could not be found. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity ERROR SEC-1099 Message , [SEC-1099], ,, ERROR, , Please enable your - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 408
one or more switches in the fabric switches in the fabric are in the ready state. When all switches switch failed to download certificate, security database, or policies. This can happen when switch Probable Cause Indicates that the switch failed to get either that the primary switch has a valid - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 409
for re-creating PKI objects outlined in the Secure Fabric OS Administrator's Guide. Severity ERROR SEC-1107 Message , [SEC-1107], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 410
security event was planned. If the security event was planned, run the secFabricShow command to verify that all switches in the fabric are in the ready state. When all switches are in the ready state, retry the operation. Severity ERROR SEC-1110 Message , [SEC-1110], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 411
-name>, FCS list must be the first entry in the Active Security policies, and the same as the current active FCS list in the switch. Probable Cause Indicates that either a security policy download is attempted with an active policy that does not have the fabric configurations server (FCS) policy - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 412
the data received by the primary fabric configurations server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When Action all - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 413
, [SEC-1121], ,, ERROR, , Time is out of range when . Probable Cause Indicates that the time on the switch is not synchronized with the primary fabric configurations server (FCS), the data packet is corrupted, or a replay attack is launched on the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 414
INFO SEC-1130 Message , [SEC-1130], ,, INFO, , The Primary FCS has failed over to a new switch. Probable Cause Indicates that an FCS failover operation was completed successfully. Recommended Action Verify that the security event was planned. If the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 415
from the primary fabric configurations server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 416
switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service names for the specified policies have changed. • The passwords have changed for the specified accounts. • The SNMP - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 417
support RCS, obtain the latest firmware version from your switch supplier, and run the firmwareDownload command to upgrade the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 418
the failed command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO 370 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 419
updated for that specific switch. Severity INFO SEC-1160 Message , [SEC-1160], ,, INFO, , Duplicate port in port list (). Probable Cause Indicates that a duplicate port member exists in the specified port list. Recommended Verify - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 420
Severity ERROR SEC-1165 Message , [SEC-1165], ,, ERROR, , Low memory, failed to enable security on all switches. Probable Cause Indicates that the system is low on memory. Recommended Wait a few minutes and try the command again. Action Severity ERROR - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 421
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 422
of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 423
>, [SEC-1174], ,, ERROR, , Failed to set password. Probable Cause Indicates that the FCS or non-FCS password could not be set. Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no Action external - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 424
-number>,, INFO, , Deleted account Probable Cause Indicates that the specified account , Policy to binary conversion error: Port is out range. Probable Cause Indicates your switch service provider. Severity ERROR 376 Fabric OS Message Reference - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 425
-number>,, INFO, , switch DB. Probable Cause Indicates that the switch database was enabled or disabled as the secondary authentication, accounting, and authorization (AAA) mechanism when the remote authentication dial-in user service (RADIUS) is the primary AAA mechanism - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 426
,, INFO, , Security violation: Unauthorized device tries to FLOGI to index/area of switch . Probable Cause Indicates that a device connection control (DCC) security violation was reported. The specified device attempted to - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 427
name>, Security violation: Login failure attempt via . Probable Cause Indicates that a serial or modem login security violation was reported. An incorrect password was used while trying to log in through a serial or modem connection; the login failed. Recommended Use the correct - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 428
method; the login failed. Recommended The error message lists the violating IP address. Verify that this IP address is being used by a valid Action switch admin. Use the correct password. Severity INFO SEC-1194 Message , [SEC-1194], ,, WARNING, , This - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 429
>,, WARNING, , Switch does not have all default account names. Probable Cause Indicates that the default switch accounts admin and user do not exist on the switch when enabling security. Recommended Reset the default admin and user account names on the switch that reported the warning - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 430
-1199 SEC-1199 Message , [SEC-1199], ,, INFO, , Security violation: Unauthorized access to serial port of switch . Probable Cause Indicates that a serial connection policy security violation was reported. An attempt was made to access the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 431
access from MS device node name , device port name . Probable Cause Indicates that a management server (MS) security run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 383 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 432
run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Probable Cause Indicates that the switch is set up with VC-encoded - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 433
Secure Fabric OS feature. Recommended Run the firmwareDownload command to update the firmware to the latest version for your specific Action switch. Verify that the firmware you are installing supports the Brocade Secure Fabric OS feature. Severity INFO Fabric OS Message Reference 385 53 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 434
to validate PKI objects occurs, follow the steps for re-creating PKI objects outlined in the Secure Fabric OS Administrator's Guide. If PKI objects are valid, verify that an unauthorized switch is not trying to access the fabric. Severity INFO 386 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 435
. Probable Cause Indicates that after some servers timed out, the specified remote authentication dial-in user service (RADIUS) server responded to a switch request. Recommended If the message appears frequently, move the responding server to the top of the RADIUS server - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 436
was planned, run the passwdCfg --setDefault command on each switch in the fabric to set the password policies to the default value. Then verify with passwdCfg --show that password policies are set to the default values on all switches and retry the secModeEnable command. Severity ERROR SEC-1312 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 437
EM module to retrieve the IP address failed. Recommended Please reboot the system to fix this error. If the problem persists contact your switch service Action provider. Severity ERROR SEC-1315 Message , [SEC-1315], ,, ERROR, , command - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 438
, , Non-acl domain tries to join a fabric with strict fabric wide policy Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with a strict fabric-wide policy. Recommended No action is required. The domain is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 439
Indicates that the security enable failed on the fabric because switch has conflicting configuration such as fabric wide consistency configuration or to support a device connection control (DCC) policy with more than 256 ports. Recommended Reconfigure any policy that includes more than 256 ports in - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 440
service Switch connecting to port - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 441
Recommended Action None, the domain is denied by disallowing all its E-ports connected to the fabric. If the domain should be allowed to FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity ERROR SEC-1330 Message Probable Cause , - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 442
secure mode failed. Reason: . Probable Cause Indicates that the secModeEnable command failed on the fabric, because default IP Filter policies are not active on the switch, or an active transaction exists on IP Filter policies. Recommended Action Verify that the security event was planned - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 443
Cause Indicates that the initialization of the simple network management protocol (SNMP) service failed and you will not be able to query the switch through SNMP. Recommended Reboot or power cycle the switch. This will automatically initialize SNMP. Action Severity ERROR SNMP-1003 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 444
Indicates that the simple network management protocol (SNMP) configuration is incorrect and the SNMP service will not work correctly. Recommended Change the SNMP configuration back to the default. Action Severity ERROR SNMP-1005 Message , [SNMP-1005], , AUDIT, INFO - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 445
ip>. Probable Cause Indicates that the supportSave command was used to transfer support information to a remote FTP location. Recommended No action is required. to set the FTP parameters. After Action the FTP problem is corrected, rerun the supportSave command. Severity WARNING Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 446
65 SS-1001 398 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 447
continue without disruption. Do not fail over or power down the system during firmware upgrade. No action is required. Run the firmwareDownloadStatus Indicates that the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 448
,, INFO, , Standby CP reboots. Probable Cause Indicates that the standby CP is rebooting with new firmware. Recommended Action No action is required. The firmwareDownload command is progressing as expected. Run the firmwareDownloadStatus command for more information - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 449
failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 450
"Standby CP was not responding. The command is aborted." "firmwareCommit has started on both CPs. Please use firmwareDownloadStatus and firmwareShow to see the firmware status." Status Code 0x65 0x66 0x67 0x68 0x69 0x6a 0x6b 0x6c 0x6d 0x6e 0x6f 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7a - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 451
." 0xa5 "New firmware failed to boot up. Please retry firmwareDownload." 0xa6 "firmwareCommit has started on the blade. This may take up to 10 minutes." 0xa7 "firmwareRestore is entered. System will reboot and a firmwareCommit operation will start 0xa8 upon boot up." "Switch is relocating the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 452
required package list file. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible is inconsistent. Run firmwareRestore to restore the original firmware, or contact your service provider for recovery." 0x25 "The post-install script - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 453
24. Remove or power off these blades before 0x30 " "Cannot downgrade due to presence of long-distance ports firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware by network issues. If the problem persists, contact your system administrator. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 454
single mode (-s) to upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO 406 Fabric OS - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 455
Fabric OS Administrator's Guide for troubleshooting information. Severity INFO error may be caused by an inconsistent AP blade firmware stored on the active CP. It may also trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1018 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 456
, remove and re-insert the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1020 Message , [SULB-1020], AUDIT, ERROR, , New firmware failed to boot in slot . Probable Cause The BP - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 457
by an unexpected disruption of the firmwareDownload command, for example, by powering off and on of the indicated BP blade in the middle of problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message , [SULB-1024], AUDIT, WARNING, , Firmware - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 458
command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message , [SULB-1031], , AUDIT, WARNING, , The switch is relocating an internal firmware image. Probable Cause Indicates that the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 459
relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1036 Message , [SULB-1036], ,, INFO, , Probable Cause Indicates the firmware version running in the system - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 460
66 SULB-1037 Probable Cause Many reasons can cause HCL to fail, such as domain not confirmed Recommended Run the reBoot command to reboot the switch manually. Action Severity Error 412 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 461
as inconsistent during failover or recovery. Recommended Action On a Brocade 24000 or 48000 switch, run the slotPowerOff command and then the slotPowerOn command. On a Brocade 7500 or AP7600 switch, reboot or power cycle the switch. Severity ERROR Fabric OS Message Reference 413 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 462
that the standby control processor (CP) does not support N_Port ID Virtualization (NPIV) functionality and the switch has some NPIV devices logged into the fabric. Recommended Load a firmware version on standby that supports NPIV functionality, using the firmwareDownload Action command. Severity - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 463
, Switch port disabled due to \"\". Probable Cause Indicates that the switch port is disabled due ports that support port swap. Then port swap the ports back to ports default area. Refer to the Fabric OS Administrator's Guide for more information on port - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 464
67 SWCH-1008 416 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 465
more programs to register with system services or to fail over to active status. Recommended Action The switch is in an inconsistent state and can be corrected only by a reboot or power cycle. Before rebooting the chassis, record the firmware version on the switch or control processor (CP) and run - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 466
supported on this platform running this version of the firmware. Brocade 24000 and 48000. Recommended Action As indicated in the message, run the chassisConfig command to change to one that is valid on this platform running this firmware supportSave command to gather troubleshooting data. Issue a - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 467
Action Run the memShow command to view the switch memory usage. Reboot or power cycle the switch. Run supportFtp as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL SYSM-1002 Message , [SYSM - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 468
69 SYSM-1004 SYSM-1004 Message , [SYSM-1004], ,, ERROR, , Failed to retrieve current chassis configuration option, ret= Probable Cause Indicates that there was a failure to read configuration data from the WWN card. Recommended Verify that the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 469
WATCHDOG EXPIRED generated by hardware watchdog expiration • MANUAL generated by the tracedump -n command Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity WARNING TRCE-1002 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 470
persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR TRCE-1004 Message , [TRCE-1004], ,, WARNING, , Trace dump< optional slot indicating on - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 471
FTP site ' '. Probable Cause Indicates that a connectivity status. This message is only applicable to the Brocade 24000, and 48000. Recommended Action This message is the supportSave command and contact your switch service provider. Severity ERROR TRCE-1008 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 472
trace information to active CP. This message is only applicable to the Brocade 24000 and 48000. Recommended Action Run the haShow command to verify switch service provider. Severity ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 473
that the AP blade is enabled and retry the command. If the AP blade is already enabled, run Action the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 425 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 474
70 TRCE-1012 426 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 475
login. This occurs if the user name or password is entered incorrectly. Recommended Action Normally, this message indicates a typing error by an authorized user. If this message occurs repeatedly, it might indicate an unauthorized user trying to gain access to a switch. When Secure mode is enabled - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 476
, , Config file change from task: Probable Cause Indicates that the track change feature recorded a configuration change for the switch. The track change feature records any change to the configuration file in nonvolatile memory, including a configDownload. This message is not - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 477
has the clock server IP configured correctly. Verify that this clock server is accessible to the switch and functional. If the principal or primary FCS does not support the feature, either choose a different switch for the role or reset the clock server to LOCL. Severity INFO Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 478
The message might be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits. • Synchronizing time or role change of the principal or primary fabric configuration server (FCS) switch. If the message does not recur, it should be ignored. • - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 479
Cause Indicates that there is a change in the source of fabric time synchronization distributed from the principal or primary fabric configuration server (FCS) switch. Another clock server in the list of clock servers configured is being used. This happens when the network time protocol (NTP) query - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 480
72 TS-1008 432 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 481
Message , [UCST-1007], , FFDC, CRITICAL, , Inconsistent route detected: Port = , should be Probable Cause Indicates that the switch detected an inconsistency in the routing database between the routing protocol and the hardware - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 482
73 UCST-1020 434 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 483
, [UPTH-1001], ,, WARNING, , No minimum cost path in candidate list Probable Cause Indicates that the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists in the candidate list (domain ID list). Recommended No action is required - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 484
74 UPTH-1001 436 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 485
Chapter WEBD System Messages 75 WEBD-1001 Message , [WEBD-1001], ,, WARNING, , Missing or Invalid Certificate file -- HTTPS is configured to be enabled but could not be started. Probable Cause Indicates that the SSL certificate file is either invalid or - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 486
>, FFDC, INFO, , HTTP server will be restarted due to change of IP Address Probable Cause Indicates that the IP address of the switch changed and the HTTP server is restarted. Recommended No action is required. Action Severity INFO 438 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 487
HTTP server cannot be started Probable Cause Indicates a rare error condition, where the built-in recovery process has failed to restore http services. The problem often results from invalid configuration of ssl certs., but there can be more than one reason for such failure. Recommended Run the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 488
75 WEBD-1008 440 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 489
This usually indicates that the system was busy. Recommended Action This message generates core dump files of the related modules (zoned, nsd, rcsd). If the supportSave command to save these core files and contact your switch service provider. Severity ERROR Fabric OS Message Reference 441 53- - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 490
76 ZOLB-1001 442 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 491
zone groups during port login (PLOGI) trap processing. This messages usually indicates problems when adding content- switch service provider. Severity WARNING ZONE-1003 Message , [ZONE-1003], ,, WARNING, , zone() contains (, - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 492
-based hard zoning. When a device is zoned using both world-wide name (WWN) in one zone and in another, this will cause that port to go session based hard zoning. In session-based zoning, the zone enforcement is checked by the software. In hardware-enforced zoning, zone or alias - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 493
. Recommended Action There are two ways to avoid this problem. • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch. Severity INFO ZONE-1008 Message , [ZONE-1008], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 494
number>,, WARNING, , WARNING All ports are offline. Probable Cause Indicates that all the ports in a zone are offline. Recommended Check If the QuickLoop zoning configuration is enabled on the switch, it will not be supported. Recommended Edit the zone database to remove the QuickLoop - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 495
Probable Cause Indicates that the required zoning license is missing. Recommended Install the zoning license using the licenseAdd command. Refer to your switch supplier to obtain a Action Zoning license if you do not have one. Severity ERROR ZONE-1015 Message , [ZONE-1015], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 496
FA zone (value = 5) QuickLoop zones are not supported in Fabric OS v4.x and above. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR ZONE-1019 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 497
operation. This usually occurs if the switch on the other side of the port is busy. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity INFO ZONE-1024 Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 498
, edit the zoning database to have zoned PIDs for that Action port. Severity INFO ZONE-1027 Message , [ZONE-1027], - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 499
database to keep it within the allowable limit for the specific switches in your fabric. Refer to the Fabric OS Administrator's Guide for information on the zone database sizes supported for each switch. Severity WARNING ZONE-1029 Message , [ZONE-1029], ,, WARNING - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 500
ZONE-1031 Message Probable Cause Recommended Action Severity , [ZONE-1031], ,, ERROR, , Switch is in interop mode. (switch, port) members not supported. The switch is set to interop mode using the interopMode command. Interop mode does not allow - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 501
is not found. Recommended Use the firmwareDownload command to reinstall the firmware. Action Severity WARNING ZONE-1035 Message , [ZONE-1035], the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 502
the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 503
too large for the memory available on the switch. Recommended Reduce the size of the zone Unstable link detected during merge at port (). Probable Cause Indicates a possible name>, The Default Zone access mode is set to No Access. Probable Cause Indicates that the Default Zone access - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 504
Action Severity INFO ZONE-1045 Message , [ZONE-1045], ,, INFO, , The Default Zone access mode is already set to No Access. Probable Cause Indicates that the Default Zone access mode is already set to No Access. Recommended No action is required. Action - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 505
Chapter AUDIT AUTH System Messages 78 AUTH-3001 Message AUDIT, , [AUTH-3001], INFO, SECURITY, , , , Event: , Status: success, Info: type has been changed from [] to []. Probable Cause Indicates - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 506
that an invalid entity attempted to connect to the switch. Recommended Action Check the connection port for a possible security attack. Check the shared ; then run the supportSave command and contact your switch service provider. Severity INFO 458 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 507
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO AUTH-3008 Message AUDIT, , [AUTH- location>, , Event: , Status: failed, Info: Port has been disabled due to authentication failure with code '< - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 508
78 AUTH-3008 460 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 509
Cause The system attempted to download a configuration without disabling the switch was unsuccessful because there are one or more parameters that require the switch to be disabled. Recommended Disable the switch using the switchDisable command and download the configuration. Action Severity - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 510
79 CONF-1022 462 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 511
-1002 Message AUDIT, , [HTTP-1002], INFO, ZONE, , , , Zoning transaction initiated by User: , Role: completed successfully. Probable Cause Indicates that the zoning database has been changed. Recommended Verify that the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 512
80 HTTP-1003 464 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 513
server (FCS) failover. - A security policy has been activated. - A security policy has been saved. - A security policy has been aborted. - A non-FCS password has changed. Recommended Action Verify that the security event was planned. If the security event was planned, no action is required. If the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 514
81 SEC-3003 SEC-3003 Message AUDIT, , [SEC-3003], INFO, SECURITY, , , , Event: , Status: success, Info: Created policy, with member(s) . Probable Cause Indicates that a new security policy was created - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 515
event-location>, , Event: , Status: success, Info: Removed member(s) from policy . Probable Cause Indicates that a user has removed the specific members from the specified security policy. Note: If you use a wildcard (for example, an asterisk) in removing - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 516
-location>, , Event: , Status: success, Info: Reset [] statistics on domain(s) []. Probable Cause Indicates that a user has reset a security statistic on the specified domains. Recommended Action Verify that the security statistic was intentionally reset. If the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 517
a user has reset the password for the specified user accounts. Recommended Action Verify that the password was intentionally reset. If the password was Name> for AAA services. Probable Cause Indicates that a user has changed the remote authentication dial-in user service (RADIUS) configuration. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 518
success, Info: Moved RADIUS server to position . Probable Cause Indicates that a user has changed the position of the remote authentication dial-in user service (RADIUS) server. Recommended Action Verify that the RADIUS server position was intentionally changed. If the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 519
-initiator-details>, , , Event: , Status: success, Info: Passwdcfg parameters set to default values. Probable Cause Indicates that the passwdCfg parameters are set to default values. Recommended Action Verify that the security event was planned. If the security event - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 520
Account [] locked, failed password attempts exceeded. Probable Cause Indicates that failed password attempts exceeded, the account has been locked. Recommended The Account may automatically unlock after the lockout duration has expired or an administrator Action may manually - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 521
INFO, SECURITY, , , , Event: , Status: success, Info: User account [], password changed. Probable Cause Indicates that the user's password changed. Recommended Action Verify that the security event was planned. If the security event - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 522
>, [SEC-3028], INFO, SECURITY, , , , Event: , Status: success, Info: User account [] deleted. Probable Cause Indicates that the specified user account was deleted. Recommended Action Verify that the security event was planned. If the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 523
SEC-3032 Message AUDIT, , [SEC-3032], INFO, SECURITY, , , , Event: , Status: success, Info: Switch is configured to database. Probable Cause Indicates that the specified event has occurred to accept - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 524
event-initiator-details>, , , Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set to . Probable Cause Indicates that the specified event has occurred. Recommended Verify that the event was planned. If the event was - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 525
was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the specified protocol connection. Take Action appropriate action as defined by your enterprise security policy. Severity INFO Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 526
81 SEC-3039 478 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 527
Cause Indicates that the simple network management protocol (SNMP) configuration s incorrect and the SNMP service will not work correctly. Recommended Reset the SNMP configuration to default. Action Severity ERROR SNMP-1005 Message AUDIT, , [SNMP-1005], INFO, CONFIGURATION, - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 528
82 SNMP-1006 480 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 529
continue without disruption. Do not fail over or power down the system during firmware upgrade. Run the firmwareDownloadStatus command for more information. Indicates that the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 530
failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 531
"Standby CP was not responding. The command is aborted." "firmwareCommit has started on both CPs. Please use firmwareDownloadStatus and firmwareShow to see the firmware status." Status Code 0x65 0x66 0x67 0x68 0x69 0x6a 0x6b 0x6c 0x6d 0x6e 0x6f 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7a - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 532
." 0xa5 "New firmware failed to boot up. Please retry firmwareDownload." 0xa6 "firmwareCommit has started on the blade. This may take up to 10 minutes." 0xa7 "firmwareRestore is entered. System will reboot and a firmwareCommit operation will start 0xa8 upon boot up." "Switch is relocating the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 533
required package list file. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible is inconsistent. Run firmwareRestore to restore the original firmware, or contact your service provider for recovery." 0x25 "The post-install script - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 534
24. Remove or power off these blades before 0x30 " "Cannot downgrade due to presence of long-distance ports firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware by network issues. If the problem persists, contact your system administrator. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 535
single mode (-s) to upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO Fabric OS Message - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 536
and re-insert the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1018 Message AUDIT, , [SULB-1018], ERROR, FIRMWARE, , , , Firmwaredownload timed out in slot - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 537
the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message AUDIT, , [SULB-1021], WARNING, FIRMWARE, , , , Firmware is being downloaded to the blade in slot - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 538
to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , [SULB-1031], WARNING, FIRMWARE, , , , The switch is relocating an internal firmware image. Probable Cause Indicates - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 539
to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1037 Message AUDIT, , [SULB-1037], ERROR, FIRMWARE, , , , HCL failed. Reboot the switch manually using the reboot command. However - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 540
83 SULB-1037 Severity Error 492 Fabric OS Message Reference 53-1000437-01 - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 541
Chapter AUDIT ZONE System Messages 84 ZONE-3001 Message AUDIT, , [ZONE-3001], INFO, ZONE, , , , Event: , Status: success, Info: \"\" added to \" - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 542
84 ZONE-3003 ZONE-3003 Message AUDIT, , [ZONE-3003], INFO, ZONE, , , , Event: , Status: success, Info: \"\" deleted. Probable Cause Indicates that the specified zone object has been deleted. The - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 543
84 ZONE-3006 ZONE-3006 Message AUDIT, , [ZONE-3006], INFO, ZONE, , , , Event: , Status: success, Info: Current zone configuration disabled. . Probable Cause Indicates that the current zone configuration has been disabled. - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 544
84 ZONE-3009 ZONE-3009 Message AUDIT, , [ZONE-3009], INFO, ZONE, , , , Event: , Status: success, Info: . Probable Cause Indicates that the specified zone transaction has been aborted. Recommended Verify that the - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 545
84 ZONE-3012 ZONE-3012 Message AUDIT, , [ZONE-3012], INFO, ZONE, , , , Event: , Status: success, Info: Zone object \"\" renamed to \"\". Probable Cause Indicates that the specified zone object - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 546
84 ZONE-3015 ZONE-3015 Message AUDIT, , [ZONE-3015], INFO, FABRIC, , , , Event: , Status: success, Info: AD configurations applied. Probable Cause Indicates that the current admin domain (AD) configuration has been saved to flash is - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 547
84 ZONE-3018 ZONE-3018 Message AUDIT, , [ZONE-3018], INFO, FABRIC, , , , Event: , Status: success, Info: has been deactivated. Probable Cause Indicates that the specified admin domain (AD) object has been - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 548
84 ZONE-3021 ZONE-3021 Message AUDIT, , [ZONE-3021], INFO, FABRIC, , , , Event: , Status: success, Info: AD object \"\" renamed to \"\". Probable Cause Indicates that the specified admin domain ( - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 549
84 ZONE-3024 ZONE-3024 Message AUDIT, , [ZONE-3024], INFO, FABRIC, , , , Command: , Status: success, Info: executed. . Probable Cause Indicates that the admin domain ad --transabort operation was successful in the specified - HP StorageWorks 4/8 | Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 550
84 ZONE-3025 502 Fabric OS Message Reference 53-1000437-01
53-1000437-01
15 June 2007
Fabric OS
Message Reference
Supporting Fabric OS v5.3.0