HP StorageWorks 4/8 Brocade Fabric OS Message Reference - Supporting Fabric OS - Page 372

58 RCS-1004 RCS-1004 Message , [RCS-1004], ,, ERROR, , Application() not registered.() Probable Cause Indicates that a specified application did not register with RCS. Recommended Action Run the haShow command to view the HA state. Run the haDisable and the haEnable commands. Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS v2.6, v3.1 and greater, v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS-1005], ,, INFO, , Phase , Application returned , 0x. Probable Cause Indicates that a receiving switch is rejecting an RCS phase. Recommended Action If the reject is in ACA phase, wait several minutes and then retry the operation from the sender switch. If the reject is in the SFC phase, check if the application license exists for the local domain and if the application data is compatible. Severity INFO 324 Fabric OS Message Reference 53-1000437-01