HP StorageWorks 4/8 Brocade Fabric OS Message Reference Supporting Fabric OS v - Page 541

80 ZONE-1040 ZONE-1040 Message , [ZONE-1040], ,, INFO, , Merged zone database exceeds limit. Probable Cause Indicates that the Fabric OS cannot read the merged zone configuration file. Typically the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity INFO ZONE-1041 Message , [ZONE-1041], ,, WARNING, , Unstable link detected during merge at port (). Probable Cause Indicates a possible unstable link or faulty cable. Recommended Check the SFP and cable at the specified port and verify that they are not faulty. Replace the SFP Action and cable as necessary. Severity WARNING ZONE-1042 Message , [ZONE-1042], ,, INFO, , The effective configuration has been disabled. . Probable Cause Indicates that the effective zone configuration has been disabled. Recommended Verify that this zone configuration change was done on purpose. If no effective zone configuration Action is needed, no action is necessary. Severity INFO ZONE-1043 Message , [ZONE-1043], ,, INFO, , The Default Zone access mode is set to No Access. Probable Cause Indicates that the Default Zone access mode is set to No Access. Recommended Verify that this Default Zone access mode change was done intentionally. Action Severity INFO Fabric OS Message Reference 489 53-1000600-01