HP StorageWorks 4/8 HP StorageWorks Fabric OS 6.1.2b release notes (5697-0351, - Page 22
Fabric OS 6.1.1 fixes, Comments, WebTools 6.1.0, Function, Solution, Closed defect summary
View all HP StorageWorks 4/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Function Fabric summary WebTools 6.1.0 DCFM Reports > Fabric summary Monitor > Reports > Fabric Summary report Comments FCIP tunnel configuration Port Admin Module > GigE tab Configure > FCIP tunnel GigE ports interface GigE ports route Non-local switch ports display in zoning tree Port Admin Module > GigE tab Port Admin Module > GigE tab Zone Admin Admin Domain Switch Admin > DCC policies Performance Monitoring Configure > FCIP tunnel Configure > FCIP tunnel Configure > Zoning Viewing FCIP tunnels is still supported in WebTools 6.1.1, but New, Edit Config, and Delete are available only in DCFM. In WebTools, non-local switch port id/WWN can be added using text box. Remove Offline or inaccessible Devices Zone Admin Configure > Zoning Replace/Replace All zone members by selecting the offline devices from the zone tree. Offline devices have an unknown overlay badge with good visibility. Zone database summary Zone Admin ping Configure > Zoning Zoning report for both online and offline database Zoning Fabric OS 6.1.1 fixes Table 9 lists defects closed in the Fabric OS 6.1.1 firmware release. Table 9 Fabric OS 6.1.1 closed defects Closed defect summary Solution During storage failover/failback test, traffic stops and fails to recover Fixed in Fabric OS 6.1.1. in single and dual backbone configurations. A failure was detected in the MP Router blade (FR4-18i) due to a dead Fixed in Fabric OS 6.1.1. heartbeat. Link drops when FLOGI is received before the port comes online on an FL_Port. Fixed in Fabric OS 6.1.1. 22