HP StorageWorks 8/80 Brocade Converged Enhanced Ethernet Command Reference v6. - Page 223

dot1x reauthMax 12 dot1x reauthMax Sets the maximum number of times that a port attempts to reauthenticate. Synopsis dot1x reauthMax number no dot1x reauthMax Operands number Specifies the maximum number of reauthentication attempts before the port goes to the unauthorized state. The range of valid values is 1-10. Defaults The default number of times that a port attempts authentication is two. Command Interface configuration mode Modes Description Use this command to set the maximum number of times that a port attempts to reauthenticate before a port changes to the unauthorized state. Use the no dot1x reauthMax command to return to the default setting. Usage There are no usage guidelines for this command. Guidelines Examples To set the maximum number of reauthentication attempts to 5: switch(config)#interface tengigabitethernet 0/1 switch(conf-if-te-0/1)#dot1x reauthMax 5 To set the reauthentication maximum to the default value: switch(config)#interface tengigabitethernet 0/1 switch(conf-if-te-0/1)#no dot1x reauthMax See Also none Converged Enhanced Ethernet Command Reference 205 53-1001347-01