HP StorageWorks 8/80 Brocade Fabric OS MIB Reference Guide v6.1.0 (53-1000602- - Page 534

5 sw Traps TABLE 12 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwEvent Integer SwFwBehavior SwFwState Integer Integer SwFwLicense Integer Possible events available: 1 started 2 changed 3 exceeded 4 below 5 above 6 inBetween Behavior type for thresholds: 1 triggered 2 continuous State type for last events: 1 swFwInformative 2 swFwNormal 3 swFwfaulty License state: 1 swFwLicensed 2 swFwNotLicensed sw Traps This section contains descriptions and other information that is specific to sw Traps. Refer to Table 13 for the six traps defined in the SW.MIB, when it occurs, and how to configure the trap, if possible. TABLE 13 SW MIB Traps Name Specific When Configure "swFault 1 1.3.6.1.4.1.1588.2.1.1.1.0.1" on page 520 (not supported) "swSensorScn 2 1.3.6.1.4.1.1588.2.1.1.1.0.2" on page 521 "swFCPortScn 3 1.3.6.1.4.1.1588.2.1.1.1.0.3" on page 522 "swEventTrap 4 1.3.6.1.4.1.1588.2.1.1.1.0.4" on page 523 "swFabricWatchTrap 5 1.3.6.1.4.1.1588.2.1.1.1.0.5" on page 524 "swTrackChangesTrap 6 1.3.6.1.4.1.1588.2.1.1.1.0.6" on page 525 During boot, if diagnostics fail N.A. Obsolete Port changes state Switch event Threshold reached Log in/log out N.A. Always on Refer to the Fabric OS Command Reference and the snmpConfig command for more information. Fabric OS Command: fwConfigure Fabric OS Command: trackChangesSet and trackChangesShow 518 Fabric OS MIB Reference 53-1000602-02