HP StorageWorks MSA 2/8 HP StorageWorks Web Tools V3.1.x/4.1.x User Guide (AA- - Page 34
Web Tools in Secure Mode, Web Tools Access and the HTTP_POLICY, Primary FCS Only Functionality
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Introducing HP Web Tools Web Tools in Secure Mode The Security feature may change your ability to access Web Tools functionality when Secure Mode is enabled. For more information on the Security feature see the HP StorageWorks Secure Fabric OS Version 1.0 User Guide. Web Tools Access and the HTTP_POLICY When Secure Mode is enabled, access to the Web Tools interface is controlled by the HTTP_POLICY. If Secure Mode is enabled and an HTTP_POLICY has been defined, your workstation IP address must be included in this policy or you will not have access to Web Tools for any switch in the fabric. If your workstation IP is not included in this policy, the interface disabled page will display when you attempt to access a switch. Primary FCS Only Functionality The following Web Tools functionality is reserved for the Primary Fabric Configuration Server (FCS) when Secure Mode is enabled: ■ Zoning Administration is only allowed from the Primary FCS switch when Secure Mode is enabled. For all other switches in a secure fabric, the Zoning Button is disabled. ■ SNMP Access Control Lists and the SNMP Community Strings can only be modified from the Primary FCS switch when Secure Mode is enabled. For Non-FCS switches, you can view the SNMP Community Strings but they are read only, and the SNMP Access Control Lists are not displayed. Disabled Functionality Telnet access to a switch and the Telnet Button in Web Tools are both disabled when Secure Mode is enabled for a fabric. You must use sectelnet or SSH to access the Fabric OS command line interface in a secure fabric. These capabilities are not accessible from Web Tools. 34 Web Tools Version 3.1.x/4.1.x User Guide