HP SureStore 7400 Power Supply Hardware Component Replacement Instructions
HP SureStore 7400 Manual
 |
View all HP SureStore 7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP SureStore 7400 manual content summary:
- HP SureStore 7400 | Power Supply Hardware Component Replacement Instructions - Page 1
hp surestore virtual arrays and disk systems power supply replacement CAUTION Parts can be damaged by from module. Copyright © 2002 Hewlett-Packard Company Printed in U.S.A 08/02 www.hp.com/support/VA7400 Pull out both cam levers at the same time. over Manufacturing Part Number *A6183-96103 - HP SureStore 7400 | Power Supply Hardware Component Replacement Instructions - Page 2
5 8 Pull the module from the slot. PORT 1 FC-AL 100MB/s A6214-60001 PORT 0 3 4 ADDRESS 5 LCC LINK 2 ACTIVE 6 LCC ACTIVE FC-AL 100MB/s 1 0 FAULT LINK ACTIVE PORT 1 FC-AL 100MB/s CAUTION DO NOT leave slot empty for more that 2 minutes. Push in both cam levers at the same time. 9 6
-
1 -
2
 |
 |
power
supply
replacement
3
4
1
2
hp
surestore
virtual arrays
and
disk systems
Manufacturing Part Number
*A6183-96103*
CAUTION
Parts can be damaged by electrostatic discharge. Use proper ESD protection.
Two models of power supplies are available for the array: the older A6211-69001 and the newer A6211-96002.
The A6211-69002 is not certified to operate with the A6211-69001 in the same array enclosure for an extended period of time.
To ensure proper array operation, the power supplies should not be mixed in the same array.
over
Copyright © 2002 Hewlett-Packard Company
Printed in U.S.A 08/02
www.hp.com/support/VA7400
Inspect the contents of the kit.
Loosen the cam lever screws with a straight blade screwdriver.
Disconnect power cord from module.
Pull out both cam levers at the same time.