HP Surestore 28/48-Slot with DLT4000 HP SureStore Fibre Channel SCSI Bridge 21 - Page 20
Choosing a Location
View all HP Surestore 28/48-Slot with DLT4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 1-3 Table 1-4 NOTE Introduction Choosing a Location Choosing a Location Physical Specifications The Fibre Bridge is designed for rackmounting. The unit can be mounted in most standard 19-inch rack configurations. The physical characteristics are as follows: Physical Specifications of the Fibre Bridge Height Width Depth Physical package weight 1.7 inches (4.2 cm) 16.9 inches (42.9 cm) 9 inches (22.8 cm) Approximately 8 pounds (3.6 kg) Environmental Specifications Choose a location that meets the following criteria: Location Criteria Room temperature 40-104° F (5-40° C). Humidity 5% to 80% relative humidity, non-condensing. Power source AC power voltage: 100/120V to 220/240 V. Clearance Rackmount configuration-requires 1 EIA unit in a rack. 1 EIA = 1.75 inches (44 mm). Requires 5 inches (125 mm) clearance between the rear edge of the Fibre Bridge and the backplane of the rack, to allow adequate room for cables. See Chapter 2 for rackmounting instructions. 1- 6 Chapter 1