HP Surestore E Disk Array XP256 HP StorageWorks Multi-protocol Router XPath OS - Page 10
Table 8 XPath OS Base Operating System and Fibre Channel Service, created manually
View all HP Surestore E Disk Array XP256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
iSCSI Gateway Service support The MP Router provides iSCSI support enabling iSCSI initiators to access Fibre Channel-based storage subsystems. For the latest information on supported configurations limitations, see the HP StorageWorks SAN Design Reference Guide: http://h18000.www1.hp.com/products/storageworks/san/ documentation.html iSCSI Multi-path iSCSI configurations using the MP Router are not supported with multi-path software. Windows servers using an iSCSI initiator must not have multi-path software installed. Microsoft iSCSI version This release of XPath supports Microsoft iSCSI initiator 1.06. Table 8 XPath OS Base Operating System and Fibre Channel Service Issue Description The configdownload command does not restore the previously saved configuration. When using the configdownload command to restore a previously saved configuration, translate (xlate) domains may not restore properly when the xlate domains were created manually. To resolve this: 1. Identify the xlate domains that were created previously. This information can be extracted from the configuration file that was uploaded earlier using the configupload command. NOTE: It is a good practice to keep a record of any xlate domains that were created manually, so they are available when needed. This eliminates the need to search through the configuration file. 2. Use the fcrxlateconfig command to manually recreate the xlate domains.3. Reboot the MP Router for the new domains to take effect. Example: fcrxlateconfig 10 20 30, where 10 represents the edge fabric ID, 20 is Remote fabric ID, and 30 is the preferred xlate domain ID. Use the help command for more details on the fcrxlateconfig command. Password length is limited to For XPath OS 7.4.x, the maximum password length is 8 characters. 8 characters. FTP servers XPath OS supports downloading firmware from any FTP server that is RFC FTP compliant. Limited testing has been completed against the following FTP servers: • HP-UX • RedHat Linux 8.0 built-in FTP service (vsftpd) • Microsoft Windows™ Server 2000 FTP service (as part of Microsoft internet services) • NetBSD built-in FTP service • Sun Solaris 8 built-in FTP service GNU telnet client When Ctrl-C is pressed twice in succession, GNU telnet client sessions on certain workstations (for example, Sun Solaris) will be disconnected from XPath OS. This is in contrast to B-series Fabric OS, on which the same Telnet client and the same key sequence does not cause a session disconnect. GNU telnet clients used with the UNIX tee utility might be disconnected unexpectedly as well. Workaround: Use /usr/bin/telnet instead of /usr/gnu/bin/telnet. 10