HP Surestore Tape Library Model 10/180 Installing the Web-Based Library Admini
HP Surestore Tape Library Model 10/180 Manual
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Surestore Tape Library Model 10/180 manual content summary:
- HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 1
level 3.01 or later is loaded. Microcode level 3.01 contains the Web-Based Library Administrator software. • Java™ Plug-in Software 1.4 or later You can download or later or Internet Explorer 4.0 or later with the latest Service Pack Procedures The following steps must be performed in the order - HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 2
connection diagram. Step 3 Set up your Internet Protocol (IP) Address from the Operator Panel. After you have powered on or reset the library, the library performs a reset. When the reset is complete, the Operator Panel displays a status screen. a. Press MENU. The MAIN MENU is displayed. b. Arrow - HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 3
. The NETWORK CONFIG MENU is displayed with the information you entered. d. Perform a reset to save the changes. Step 5 Set up your Library Name from the Operator Panel. The library name is aliased to the IP Address by your Network Administrator. An alias is the logical mapping created between the - HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 4
is displayed with the information you entered. d. Perform a reset to save the changes. Step 7 - optional Configure the Java Plug-in for code download to the library Note: This step is required only if you wish to enable code downloads from the web interface. You must have loaded the Java Plug-in - HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 5
procedure. Add the Policy: a. Click Add Policy Entry button. The Policy Entry window is displayed. b. Type: http:///libconnect.jar in the CodeBase field, where library IP is the 12-digit library IP address (Example: 123.456.789.012) or domain name. Note: You must enter one policy entry - HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 6
The Policy Entry window is displayed with the information you entered. h. Click Done. The Policy Tool window is displayed with the CodeBase you entered. i. Save the new policy name to disk by selecting one of the following: - If an error dialog box was displayed when you launched the Policy Tool: 1. - HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 7
IP Address is correct. To do this in Windows: a. Go to the Windows Start Menu. b. Select Start -> Run. c. Enter ping in the Start->Run text field. To do this in UNIX: - Enter ping from the command line. Step 9 Start the Web-Based - HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 8
1 Figure 1 10/180 Tape Library 1. Enet (Ethernet connection) C24421 313670504 (Rev D) 8 - HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 9
1 Figure 2 20/700 Tape Library 1. Enet (Ethernet connection) C24422 313670504 (Rev D) 9 - HP Surestore Tape Library Model 10/180 | Installing the Web-Based Library Admini - Page 10
313670504 (Rev D) 10
313670504 (Rev D)
1
Installing the Web-Based Library Administrator
Requirements
Before installing the Web-Based Library Administrator,
verify that the following requirements are met:
•
Library is powered on and initialized
•
Minimum requirements: 200MHz processor; 64 MB
RAM (96 MB RAM is preferred)
•
Microcode level 3.01 or later is loaded.
Microcode level 3.01 contains the Web-Based Library
Administrator software.
•
Java™ Plug-in Software 1.4 or later
You can download the Java plug-in from:
•
Netscape Navigator 4.5 or later or Internet Explorer 4.0
or later with the latest Service Pack
Procedures
The following steps must be performed in the order in
which they are presented to successfully install the
Web-Based Library Administrator.
Note: You must know the IP Address of your library before
you perform the following steps.