HP Surestore Tape Library Model 10/180 Installing the Web-Based Library Admini - Page 1

HP Surestore Tape Library Model 10/180 Manual

Page 1 highlights

Installing the Web-Based Library Administrator Requirements Before installing the Web-Based Library Administrator, verify that the following requirements are met: • Library is powered on and initialized • Minimum requirements: 200MHz processor; 64 MB RAM (96 MB RAM is preferred) • Microcode level 3.01 or later is loaded. Microcode level 3.01 contains the Web-Based Library Administrator software. • Java™ Plug-in Software 1.4 or later You can download the Java plug-in from: http://java.sun.com/products/plugin • Netscape Navigator 4.5 or later or Internet Explorer 4.0 or later with the latest Service Pack Procedures The following steps must be performed in the order in which they are presented to successfully install the Web-Based Library Administrator. Note: You must know the IP Address of your library before you perform the following steps. 313670504 (Rev D) 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

313670504 (Rev D)
1
Installing the Web-Based Library Administrator
Requirements
Before installing the Web-Based Library Administrator,
verify that the following requirements are met:
Library is powered on and initialized
Minimum requirements: 200MHz processor; 64 MB
RAM (96 MB RAM is preferred)
Microcode level 3.01 or later is loaded.
Microcode level 3.01 contains the Web-Based Library
Administrator software.
Java™ Plug-in Software 1.4 or later
You can download the Java plug-in from:
Netscape Navigator 4.5 or later or Internet Explorer 4.0
or later with the latest Service Pack
Procedures
The following steps must be performed in the order in
which they are presented to successfully install the
Web-Based Library Administrator.
Note: You must know the IP Address of your library before
you perform the following steps.