HP T5630w Using the HP DHCP Settings Update Client - Page 13

[Altiris] Setting Description NotUseMCast = 0/1 This setting allows you to turn off the Altiris agent MultiCast setting. Only specify this setting if you want to disable MultiCast. If not specified default is set to 0; MultiCast enabled. TcpAddr = String in the form of an IPv4 address This setting specifies the IP address of the Altiris server. TcpPort = String in the form of port This setting specifies the IP port of the Altiris server. [XpePrep] Setting Shutdown = Shutdown/Reboot/ Prompt/None SettingsVersion = INT CommitEWF = Yes/No Description This setting specifies the shutdown action to take when complete. Default is Prompt. Assign a positive integer that specifies the version number of the settings that will be maintained and compared to prevent overwriting changes. For example, if you apply SettingsVersion equal to 2, the next time you apply changes you will need to update the SettingsVersion parameter to a value greater than 2. Specify 0 or leave this key out to apply settings regardless of the previous version. For information on using this setting, please see the Best Practices section of this document. This setting conditionally commits the EWF Overlay to the protected volume. This allows settings to be persistent across reboots. For information on using this setting, please see the Best Practices section of this document. 13