HP Thin Client PC t1000 Compaq Hardware Reference Guide For Thin Clients
HP Thin Client PC t1000 Manual
View all HP Thin Client PC t1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Thin Client PC t1000 manual content summary:
- HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 1
b Hardware Reference Guide For Thin Clients Document Part Number: 254241-001 July 2002 This book provides basic hardware information for this series of Compaq Thin Clients. - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 2
. Ä CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. Hardware Reference Guide First Edition July 2002 Document Part Number: 254241-001 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 3
2-6 T30 Flash Memory Installation 2-7 SODIMM Installation 2-9 PCMCIA Wireless Card Installation 2-10 Accessing the T1010 PCMCIA Slot 2-10 Accessing the T30 PCMCIA Slot 2-11 Hardware Reference Guide iii - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 4
Client with a Cable Lock B-3 C Electrostatic Discharge Preventing Electrostatic Damage C-1 Grounding Methods C-2 D Routine Thin Client Care and Shipping Preparation Routine Thin Client Care D-1 Shipping Preparation D-2 Important Service Repair Information D-2 iv Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 5
Compaq Thin Clients. To order your CD, free of charge, visit the Compaq website at http://www.compaq.com/products/thinclients/rapport and follow the instructions. Hardware Reference Guide 1-1 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 6
Slot 7 Line-in Audio Connector (Microphone) 8 Power Cord Connector 9 Monitor Connector - Universal Serial Bus (USB) Connector q Parallel Connector w Line-out Audio (Headphone) Connector 1-2 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 7
T20 Rear Panel Components Product Features 1 Power Cord Connector 2 Four USB Connectors 3 Monitor Connector 4 Line-out Audio Connector 5 Line-in Audio Connector 6 Ethernet RJ-45 Connector Hardware Reference Guide 1-3 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 8
connector is for use only with the supplied power adaptor. Replace only with the same or equivalent type as recommended by the manufacturer. 1-4 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 9
System Board Components The T1010 system board houses the SODIMM memory module 1. ✎ The T1010 Thin Client is not flash or DRAM memory upgradeable. Hardware Reference Guide 1-5 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 10
Product Features T20 System Board Components 1 Memory 2 Flash Memory Module 3 Processor 1-6 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 11
T30 System Board Components Product Features 1 SODIMM Memory 2 IDE Flash Memory (may vary by model) 3 Processor Hardware Reference Guide 1-7 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 12
) to open pop-up menus in a Microsoft Office application. May perform other functions in other software applications. *Keys available in select geographic regions. 1-8 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 13
button Launches Explore My Computer Launches Find Document Launches Find Computer Minimizes all open applications Undoes Minimize All Displays the Run dialog box Hardware Reference Guide 1-9 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 14
Product Features Special Mouse Functions Most software applications support the use of a mouse. The functions assigned to each mouse button depend on the the Thin Client. Keep this number available for use when contacting Compaq customer service for assistance. 1-10 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 15
these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See Appendix C, "Electrostatic Discharge," for more information. Hardware Reference Guide 2-1 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 16
if necessary, any hardware that will be replaced. 5. Install any optional equipment. ✎ Many of the instructions for installing Thin Client options can be found and downloaded from the Compaq website at http://www.compaq. 10. Reconfigure the Thin Client, if necessary. 2-2 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 17
, make sure your Thin Client is powered off and disconnected from the power outlet prior to installing any components. Power on switch location Hardware Reference Guide 2-3 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 18
board: 1. Press outward on the thumb latches 1. 2. Slide the panel back 2, as shown in the following illustration. Removing the T20 Side Access Panel 2-4 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 19
is disconnected from the electrical outlet. To access the T30 system board: 1. Remove the security cable lock, if installed. See the security cable lock instructions for information on how to remove the lock. 2. Remove the screw 1 from the back panel next to the PCMCIA slot cover. 3. Slide the side - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 20
all Thin Clients support the same options. supported on your Thin Client, to order your available options, and to download the complete installation instructions for your options. The following sections contain some general installation instructions use the following instructions as an overview of - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 21
a general installation overview. Refer to the documentation included in your flash memory option kit for detailed instructions on installing T30 flash memory. 1. Follow the applicable instructions in the "General Hardware Installation Sequence" section at the beginning of this chapter. 2. Access the - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 22
two illustrations. Type One Type Two 6. Attach the side access panel. 7. Power up the Thin Client. 8. Upgrade the Thin Client firmware if necessary. 2-8 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 23
✎ In addition to following these instructions, follow the instructions that are applicable to your specific Thin Client option. 1. Follow the applicable instructions in the "General Hardware Installation 5. Attach the side access panel. 6. Power up the Thin Client. Hardware Reference Guide 2-9 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 24
Thin Client-related instructions included in the Compaq option kit. Compaq also supports several third-party wireless cards. Visit http://www.compaq.com\support\thinclients for installation instructions. In order close the slot cover after a PCMCIA card is installed. 2-10 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 25
the slot cover 2 by prying it open with your fingers or a small flathead screwdriver until it pops loose. Accessing the T30 PCMCIA slot Hardware Reference Guide 2-11 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 26
° C 20-80% 3048 m 12192 m 90-264 VAC 47-63 Hz 20 W 4.0 A 114.2 kg-cal/hr 111.9 kg-cal/hr 57.7 kg-cal/hr Hardware Reference Guide A-1 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 27
% 10-95% 3048 m 12192 m 90-265 VAC 47-63 Hz 18 W 1.5 A 88.2 kg-cal/hr 87.1 kg-cal/hr 27.7 kg-cal/hr A-2 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 28
-90% 10-95% 3048 m 12192 m 180-265 VAC 200-240 VAC 50-60 Hz 40 W 1.0 A 34.4 kg-cal/hr 13.4 kg-cal/hr Hardware Reference Guide A-3 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 29
be set up to accept a security cable lock. See the following sections for instructions on securing your specific Thin Client. Securing a T20 Thin Client The T20 Thin removed. To order these options and to download the installation instructions for these options, visit the Compaq website at http://www - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 30
Thin Client by unscrewing the four screws at the bottom that secure the base to the unit. 2. Use the base of the Thin Client as a guide for pre-drilling two holes on the tabletop or counter as shown in the following illustration. Pre-drilling the screw holes B-2 Hardware Reference - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 31
1, "Product Features," for the location of this slot. The cable lock is available as an option. To order this option and to download the installation instructions for this option, visit the Compaq website at http://www.compaq.com/products/thinclients/options/index.html. Hardware Reference - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 32
before removing them from their containers. ■ Avoid touching pins, leads, or circuitry. ■ Always be properly grounded when touching a static-sensitive component or assembly. Hardware Reference Guide C-1 - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 33
work mat. If you do not have any of the suggested equipment for proper grounding, contact your Compaq authorized dealer, reseller, or service provider. ✎ For more information on static electricity, contact your Compaq authorized dealer, reseller, or service provider. C-2 Hardware Reference Guide - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 34
extremes of heat and cold. For information about the recommended temperature and humidity ranges for your Thin Client, see Appendix A, "Specifications," in this guide. ■ Keep liquids away from the Thin Client and keyboard. ■ Turn off the Thin Client before you do either of the following: ❏ Wipe the - HP Thin Client PC t1000 | Compaq Hardware Reference Guide For Thin Clients - Page 35
nonoperating ranges, see Appendix A, "Specifications," in this guide. Important Service Repair Information In all cases, remove and safeguard all memory and flash modules that were sent. In countries that do not support customer mail-in repair by returning the same unit to the customer, all
b
Hardware Reference Guide
For Thin Clients
Document Part Number: 254241-001
July 2002
This book provides basic hardware information for this series of
Compaq Thin Clients.