HP Thin Client PC t1000 T1500/T1510 Windows-based Terminal Network Installatio - Page 40
HTTP (Help), Serial Internet Connections, PPP, SLIP, Select | System
View all HP Thin Client PC t1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
26 Chapter 3 HTTP (Help) HTTP is the protocol used by the World Wide Web. The server-based user help for the terminal is distributed as a tree of HTTP links and is on the installation CD. Terminal help can be installed on a WWW server, but because of network traffic or your configuration, it may be more desirable to configure a local HTTP server and install the help tree there. HTTP configuration is based upon the HTTP server software used, so refer to the installation documents that come with the HTTP software you are installing. There are no special requirements for using the help subsystem. Serial Internet Connections DNS routing has to be through either the terminal's serial port (Select | System | Setup | Connectivity | Serial Internet) or the Ethernet 10/100 Base-T connection (Select | System | Setup | Connectivity | Internet), not both. The resolver does not look up more than one domain. Linux requires that DNS be set up before working with SLIP/CSLIP or PPP. It will not accept the DNS information from the DNS server, so you must manually enter this in the DNS dialog section of the Serial Internet dialog box or Internet dialog box if you intend to use the PPP server's DNS. PPP PPP stands for Point-to-Point Protocol and is a standard serial line Internet protocol. Instructions for configuring the PPP server are best left to the documentation associated with the server, but the following restrictions apply to the client-side implementation for the terminal: Microsoft Windows NT RAS can be set up to use a variant of CHAP (Challenge/Handshake Authentication Protocol); the PPP connection will not work with this. SLIP SLIP stands for Serial Line Internet Protocol and is another standard serial line Internet protocol. It is does not provide error detection or retransmission services and does not compress data. Refer to the server documentation for configuration of the SLIP server. On the terminal, the host name and server name must correspond to entries in the host table.