HP TouchSmart 610-1147c Upgrading and Servicing Guide - Page 19
Upgrading or Replacing Memory, IMPORTANT
View all HP TouchSmart 610-1147c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
7 Lay the computer down on a flat surface, covered with a soft cloth to protect the screen from scratches or other damage. Make sure the stand extends beyond the edge of the flat surface. 10 Slide the memory access panel toward the center of the computer until it stops (approximately 5 cm or 1/5 inch). 8 Remove the screw cover from the memory access panel by lifting it up and away from the computer. 11 Lift up the outside edge of the panel approximately 2.5 cm (1 inch) (1) and slide the panel toward the outside edge of the computer (2) to remove it. 9 Remove the screw at the top of the memory access panel using a flathead or Torx screwdriver. IMPORTANT: If you are removing both cards on one side, you must remove the upper one before removing the lower one. Remove 1 before 3. Remove 4 before 2. 647642-001 - Upgrading or Replacing Memory 17