HP TouchSmart tm2-2100 HP TouchSmart User Guide - Windows 7 - Page 91
Adding or replacing memory modules
View all HP TouchSmart tm2-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Adding or replacing memory modules The computer has two memory module compartments, which are located on the bottom of the computer. The memory capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, ensure that you are discharged of static electricity by touching a grounded metal object. NOTE: To use a dual-channel configuration when adding a second memory module, be sure that both memory modules are the same size. To add or replace a memory module: 1. Save your work. 2. Shut down the computer and close the display. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch. Then shut down the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the 2 memory module compartment cover screws (1). 8. Remove the memory module compartment cover (2). Adding or replacing memory modules 81