HP Vectra XA 6/xxx HP Vectra XA 6/xxx PC - User’s Guide, D4544-90001 - Page 35
Installing a Tape Drive in the Bottom Shelf
View all HP Vectra XA 6/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
naja-2.fb4 Page 25 Wednesday, May 15, 1996 1:56 PM 2 How to Install Accessories In Your PC Installing Mass Storage Devices 8 Support the power supply with your hand and very carefully return the PC to the upright position. 9 Connect the data and power cables to the rear of the drive. The connectors are shaped to fit one way only. If you are not sure which connector to use, refer to "Connecting IDE Devices", on page 20. Data cable Power cable 10 Replace the CD-ROM in the middle shelf. 11 Install any other accessories before replacing the cover. Replace the side bezel. Reconnect all cables and power cords. 12 Verify the new configuration by checking the HP Summary Screen. Refer to the "HP Summary Screen", on page 55. Installing a Tape Drive in the Bottom Shelf A tape drive can be installed in the bottom shelf. 1 Disconnect the computer's power supply cord from the power outlet, and disconnect the PC from any telecommunications network. 2 Remove the computer's cover. 3 Remove the CD-ROM from the middle shelf. English 25