HP Vp6320 HP vp6300 Series Digital Projector - User's Guide
HP Vp6320 - Digital Projector - DLP Manual
View all HP Vp6320 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Vp6320 manual content summary:
- HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 1
HP vp6300 Series Digital Projector User's Guide - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 2
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Hewlett-Packard Company Digital Projection and Imaging 1000 NE Circle - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 3
7 What's in the box 8 Identifying common features 9 Projector at a glance 9 Projector buttons and lights 11 Back panel 12 Remote control 14 Accessories 15 Setting up the projector 16 Positioning the projector 16 Connecting power 19 Connecting a computer 20 Connecting a handheld organizer - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 4
the projector lens 43 Replacing the lamp module 44 Replacing the battery in the remote control 46 Upgrading the projector 47 Updating the firmware 47 5 Installing Permanently Installing the projector 49 Choosing cables 49 Installing on a table 49 Installing on the ceiling 49 Installing - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 5
7 Reference Specifications 65 Safety information 68 LED safety 68 Mercury safety 68 Regulatory information 69 U.S.A 69 Canada 69 Japan 70 Korea 70 International 70 5 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 6
6 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 7
Do not circumvent the grounding prong on the power cord. • Route all cables so they are not located where people can step on them or trip on them. • Place the projector flat on its base on a sturdy surface or on an HP ceiling mount. Do not stand the projector on its front surface. • Do not touch the - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 8
not contain any of the following items, contact HP. TIP: After you open the box and remove the contents, save the box in case you must ship the projector. Identifying the contents of the box Item 1 Projector 2 VGA cable 3 Power cord 4 Remote control 8 Setting Up Function Displays images. Connects - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 9
use of the projector, plus support and warranty information. Provides instructions to help get started. Identifying common features Projector at a glance Identifying major components Item 1 Infrared port 2 Height adjustment button Function Receives signals from the remote control. Also works as - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 10
components (continued) Item 3 Foucus and zoom rings 4 Button panel 5 Lens cover 6 Lens Function Focus ring: focuses at distance of 1 to 10 m (3 to 33 ft). Zoom ring: enlarges picture size from 100% to 116%. Contains control buttons and indicator lights. Protects the lens. Projects the image. 10 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 11
and lights Identifying the projector buttons and lights Item 1 Power button 2 Keystone adjustment 3 Page-up and Page-down buttons 4 Source button 5 Picture mode button 6 Temperature warning light 7 Lamp warning light 8 Menu buttons 9 Auto sync button Function Turns the projector on or off. Adjusts - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 12
plug. Connects to computer and controls the mouse. Connects video input from computer or component-video source. Sends the VGA-in signal to a monitor. Disconnects power. Turn off when unplugging power cord. CAUTION: Do not use this switch to turn off the projector. Use the power button on top of the - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 13
models. 9 Power cord socket Connects power cord to projector. : DVI input port ; Lock slot < Serial port Connects DVI-D digital video source. NOTE: Available only on certain models. Locks the projector to a stationary object with the use of a cable and lock. Connects a room controller. NOTE - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 14
. Identifying components of the remote control Item 1 Hide button 2 Mouse pad 3 Power button 4 Left-click and right-click mouse buttons 5 Page-up and Page-down buttons Function Blanks picture, mutes speaker. Moves the mouse pointer on a connected computer. Turns the projector on or off. Perform - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 15
even greater convenience. • HP premium remote control-allows you to control every aspect of your presentations. • HP power cables-allow you to connect in any region. • HP cables-allow you to connect all audio-video equipment. • HP replacement lamp-brings your projector up to factory-fresh brightness - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 16
Setting up the projector Positioning the projector The following tables show you where to position the projector in relation to the screen. TIP: For best picture quality, place the projector 1.5 to 5 m (5 to 16 ft) from the screen 16 Setting Up - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 17
from the screen-vp6310 series Image size (diagonal) Image size (width) Distance (lens to screen) (inches) (meters) (inches) (meters) (inches) (meters) 30 0.8 24 0.6 41 to 48 1.1 to 4.9 331 to 384 8.4 to 9.8 270 6.9 216 5.5 372 to 396 9.5 to 10.0 Setting up the projector 17 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 18
minimum and maximum distance from screen = B width of screen = 0.8 × diagonal of screen (for 3:4 screen) projector lens below bottom of screen = C × width of screen (for 4:3 screen) vp6310 series A = 1.7 to 2.0 B = 1 to 10 m (3 to 33 ft) C = 0.11 to 0.41 vp6320 series A = 1.8 to 2.1 B = 1 to - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 19
screen. 2. Connect one end of the power cord to the back of the projector 1 and the other end to a grounded electrical outlet 2. 3. Turn on the main disconnect switch 3 on the back of the projector. If you want to permanently install the projector on the ceiling or behind the screen, see "Installing - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 20
: • VGA cable 1 • USB cable 2 (optional) • Audio cable, mini-phone 3 (optional) The optional USB connection allows you to use the mouse and page up/down features on the remote control. See "Showing a computer screen" on page 31. TIP: If the computer display does not appear on the projector, you - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 21
organizer Not all handhelds come with VGA-out ports. For example, an iPAQ Pocket PC may require a VGA-out PC Card with 15-pin connector. If necessary, install a VGA-out accessory card into the organizer. Requires: • VGA cable 1 • VGA-out accessory card 2 (in some cases) Setting up the projector 21 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 22
you want to connect a SCART video device to the projector, you will need a SCART adapter (available from HP). Connecting a DVI source The DVI port is available only on certain models. It supports only DVI digital sources. Examples: Cable boxes, satellite receivers, and some computers Requires: • DVI - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 23
boxes, DVD players, satellite receivers, and audio-video receivers Requires: • Component-to-VGA cable 1 • Audio cable, RCA 2 (optional) TIP: Many DVD players and other high-quality video devices information, refer to the user documentation provided with the video source. Setting up the projector 23 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 24
Connecting an S-video source Examples: DVD players, VCRs, cable boxes, camcorders, and video gaming devices Requires: • S-video cable 1 • Audio cable, RCA 2 (optional) 24 Setting Up - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 25
Connecting a composite-video source Examples: VCRs, DVD players, audio-video receivers, and video gaming devices Requires: • Composite-video cable 1 • Audio cable, RCA 2, or combined video-audio cable (optional) Setting up the projector 25 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 26
and the main disconnect switch is on. 2. Open the lens by sliding the lens cover 1 to the left. 3. Press the power button 2 on the projector or on the remote control. The projector takes a minute or so to warm up. The power button blinks during warm-up. TIP: If the picture does not appear on the - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 27
normal for parts of the projector and the air coming out of the projector to be very warm. If the projector starts to overheat, the temperature warning light will turn on and the projector will shut down. Turning the projector off 1. Press the power button on the projector or remote control to turn - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 28
instructions for making basic adjustments to the projector. Aiming the projector • To raise or lower the projected picture on the screen, press the height adjustment button 1 and raise or lower the front of the projector the image becomes clear. The projector can be focused at distances of 1 to 10 m - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 29
and computer. Power button 3. Left-click or right-click button 4. This feature requires a USB connection between the projector and computer. Page-up or page-down button 5. This feature requires a USB connection between the projector and computer. auto sync button 6. Using the remote control 29 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 30
Press this... Change picture settings for different type of input Picture mode button 7 one or more times. signal Change settings using on- or more times. TIP: From within the distance of 9 m (30 ft), aim the remote control at the screen or at the front or back of the projector. 30 Setting Up - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 31
" on page 28. 3. If a different input source is shown on the projector, press the source button on the projector or remote control one or more times to select the VGA-in port. 4. If the computer display is not shown on the projector, you might have to turn on the computer's video output port. For - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 32
32 Showing Presentations - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 33
3 Adjusting the Projector Adjusting the picture and sound Choosing the best picture mode You can quickly choose a different picture mode to make adjustments to the picture. Picture modes can control properties such as color and size. They let you easily choose the best settings for ambient lighting - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 34
the screen: • If the active video device sends widescreen output to the projector, press enter, go to Input, and set Widescreen input to Yes. See 1 is to change the current picture mode so it makes a smaller picture. Press enter, go to Picture > Customize picture mode, and set Stretch to Reduced. - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 35
picture on the screen might slant in or out, even though the top and bottom are level. The keystone adjustment corrects this problem. S Press the keystone adjustment on the projector until the picture looks correct. You can also make the keystone adjustment in the on-screen menu. Press enter, and go - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 36
settings on your projector to get the best color and image quality. You should perform these steps for each input source device and each input port that you use. Do them in the order shown. For some input ports, some of these settings may not be available. 1. Press the picture mode button and - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 37
Adjusting the volume You can control the volume of the projector's speakers: • To change the volume of the projector's speakers, press enter, the Setup menu, you can select settings, such as menu language, projector position, and menu timeout. To get descriptions for all available setup adjustments - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 38
, you must call HP support to unlock the projector. You must have the projector and your proof of purchase. Using the on-screen menu Changing settings using the on-screen menu You can change the on-screen menu settings with the buttons on either the projector or the remote control. 1. Press enter on - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 39
to the VGA-in port. S-video Show the source connected to the S-video port. Composite Shows the source connected to the composite-video port. DVI Shows the source connected to the DVI port (available only on certain models). Scan inputs Sets whether the projector automatically searches - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 40
For certain component inputs, selects the type of color standard used by the source. Reset color settings Restores these color settings to the default settings. VGA settings... Adjusts settings for a computer input. Auto-sync Resynchronizes the projector to the input signal. This can compensate - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 41
-screen menu. Corrects the slanted sides of the picture. This compensates for a projector that is too high or low relative to the screen. Resets the keystone correction to zero (no correction). Sets a lower power level for the lamp. Sets how many seconds the on-screen menu waits for input before it - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 42
Reset lamp hours For a new lamp, resets the hours of use. Reset all settings Restores all menu settings to factory default settings. Help menu Help Diagnostics... Displays information and status of the projector. Show tests for checking the operation of the projector and the remote control. 42 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 43
projector status To get the projector status: S Press the enter button on the projector or remote control and go to Help. This screen shows information and status for the projector. Cleaning the projector lens You can clean the front lens of the projector fabric is damaged, replace it. CAUTION: - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 44
the projector up to factory-fresh brightness. We recommend replacing the lamp if a warning message is displayed. WARNING! Replacing the lamp module requires special consideration: • To reduce the risk of injury, be careful when removing the lamp module as broken glass might be present. For a ceiling - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 45
5. Loosen the two screws 4 on the lamp module, and pull out the module 5. 6. Insert the new lamp module into the projector and tighten the two screws. 7. Plug in the lamp connector. 8. Snap the lamp cover into place. 9. Turn on the projector. If the lamp does not turn on after the warm-up period, - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 46
Replacing the battery in the remote control 1. Use a ballpoint pen to hold the battery latch toward the center, then pull out the battery holder 1. 2. Insert the new battery 2 in the holder. 3. Push the holder 3 into the remote control. When discarding old batteries, contact your local waste- - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 47
upgrade website (see introduction for this section) and download the latest file intended for a USB upgrade. 2. Connect a USB cable (available from HP) between the USB port on the projector and the USB port on the computer. 3. On the computer, run the file you downloaded by double-clicking the file - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 48
48 Maintaining the Projector - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 49
permanently, check the setup with the final cables in the open. Installing on a table This installation is covered in detail in Chapter 1. See "Setting up the projector" on page 16 for more information. Installing on the ceiling WARNING! To minimize the risk of injury from improperly installed - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 50
the projector to the ceiling using an HP ceiling mount kit. Refer to the installation instructions provided with the ceiling mount kit. 2. After the projector is mounted on the ceiling, adjust the projector settings to match this setup. Press enter, go to Setup > Advanced setup > Projector position - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 51
TIP: As an alternative, you can loop a cable or bracket around the projector handle to secure the projector in place. Controlling an external accessory If your projector has a 12-volt trigger output port, the projector can automatically control one or more accessories. Certain types of accessories - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 52
of your installation. Serial connections The serial port on the projector uses a standard serial (RS-232) cable: • Pin 2: data sent to the projector (RxD) • Pin 3: data sent from the projector (TxD) • Pin 5: ground The room controller must use the following serial (RS-232) settings: • 9600 baud - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 53
The following table shows the specific syntax to use for various requested tasks. To perform controller. Actions initiated by the projector can also generate notifications. The projector always sends notifications whenever a setting changes, whether as the result of a request from a controller, - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 54
LF> *CSPC=? (acknowledges request) (projector is attempting to acquire source 4, and in the interim has no valid source) (source 4 is now active) (brightness has been modified for source 4) (color space is not supported for this input) Room controller commands In the following tables, if - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 55
color space: 0=RGB, 1=YPbPr, 2=YCbCr. 0,1,5,? Sets or queries the picture mode the color saturation. -45 to 45, +, -, ? Sets or queries the tint. 0 to 2, ? Sets or queries the color temperature: projector to the active computer input source. -50 to 50, +, -, ? Sets or queries the projector - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 56
used by the projector: 0=English, 1=French, 2=Italian, 3=German, 4=Portuguese, 5=Spanish, 6=Traditional Chinese, 7=Simplified Chinese, 8=Korean, 9=Japanese, 10=Czech. Sets or queries low-power operating mode: 0=normal power, 1=low power. Queries the time (in tenths of hours) that the lamp has been - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 57
ceiling, 2=rear table, 3=rear ceiling. Sets or queries the menu timeout setting (seconds) Sets or queries the power timeout: 0=never, 3=15 min, 4=30 min, 5=60 min, 6=120 min. Queries the projector model number and firmware projector into warm-up state, and later into on state. The projector projector - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 58
when a system alert condition occurs: 0=lamp life warning, 1=lamp life reached, 2=lamp faulty, 3=lamp problem, 4=internal temperature too high, 5=fan problem, 6=ambient temperature too high, 7=color wheel problem, 8=lamp cover open. ALERT is sent only by the projector, and cannot be used in requests - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 59
63 • "Interruption problems" on page 63 • "Remote control problems" on page 63 TIP: If these suggestions do not solve your problem, go to http://www.hp.com/support for additional information. To contact HP, refer to the support guide included with the projector. Warning light problems If both red - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 60
quickly: • Check that the cover over the lamp at the side of the projector is correctly installed and fully attached. Check the tab at the top of the cover and latch at the bottom. Start-up problems If no lights or sounds turn on: • Be sure that the power cable is securely connected to the - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 61
or too large: • Adjust the zoom ring on top of the projector. • Move the projector closer to or farther from the screen. • On the projector or remote control, press the picture mode button one or more times to see if one of the picture modes makes the image the correct size. • Press enter, go to - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 62
> Reset color settings, and press enter. • Press enter, go to Setup > Reset all settings, and press enter. If a scrolling or cut-off image is displayed for a computer connection: • Press the auto sync button on the projector or remote control. • Turn everything off. Then power on the projector first - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 63
out and makes a popping sound, the projector will not turn back on until the lamp module has been replaced. • If the lamp breaks, contact HP about repairs that might be required due to glass fragments. Remote control problems If the remote control does not operate: • Be sure nothing is blocking - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 64
Running the projector diagnostics The on-screen menu contains diagnostic tests you can use to verify the proper operation of the projector and the remote control. 1. Press enter and go to Help > Diagnostics. 2. Select a test and press enter. 3. Follow the displayed instructions. 64 Fixing Problems - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 65
://www.hp.com. Projector Specifications Size 280 × 255 × 102 mm (11.0 × 10.1 × 4.0 in.) Weight 3.5 kg (7.7 lb) Resolution vp6310 series: SVGA (800 × 600) vp6320 series: XGA (1024 × 768) Technology DLP Video connectors VGA-in (D-sub) with optional cable for component-video input VGA-out - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 66
and back of projector Lamp 210-watt lamp 4000-hour average lamp life (to half of original brightness) Lamp saver mode reduces lamp power to 168 watts Replacement lamp: L1695A Optics 1 to 10 m (3 to 33 ft) focus range 1.16:1 optical zoom vp6310 series: 1.7 to 2.0 throw ratio (distance/width) 128 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 67
Projector Specifications (continued) Environment Operating mode compatibility Compatibility Resolution Analog VGA 640 × 350 640 × 400 640 × 480 720 × 400 SVGA 800 × 600 832 × 624 XGA 1024 × 768 1152 × 870 1280 × 960 SXGA 1280 × 1024 SXGA+ 1400 × 1050 Digital (vp6320 series) VGA - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 68
projector and remote control are classified as Class 1 LED devices according to International Standard IEC 825-1 (EN60825-1). This device is not considered harmful, but the following precautions are recommended: • If the unit requires service, contact an authorized HP service center. • Do not - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 69
. Any modifications to your digital projector not expressly approved by HP could void the authority to operate the digital projector in these regions. U.S.A. This digital projector has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 70
Japan Korea International For regulatory identification purposes, your product is assigned a regulatory model number. The regulatory model number for your product is listed in the declaration of conformity. This regulatory number is different from the marketing name and product number. Regulatory - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 71
/IEC Guide 22 and EN 45014 Manufacturer's name: Hewlett Packard Company Manufacturer's address: Hewlett Packard Company Digital Projection & Imaging 1000 NE Circle Blvd. Corvallis, OR 97330-4239 Declares, that the product(s): Product name: Digital Projector Model numbers: vp6310/vp6320 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 72
72 Reference - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 73
15 adjusting color 36 picture 33 setup 37 shape of picture 34 slanted picture 35 sound 33 aiming projector 28 analog video mode compatibility 67 audio adjusting 33 ports 12 troubleshooting 63 B buttons location 11 opening menu 38 C cables choosing 49 connections 22 ceiling installation 49 - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 74
information 69 remote control buttons 14 installing batteries 46 opening menu 38 troubleshooting 63 using 29 replacing lamp 44 room controller 52 room layout 16 RS-232 52 S safety information 7, 68 SCART 22 screen controlling 51 positioning 17 security locking cable 50 security code 37 selecting - HP Vp6320 | HP vp6300 Series Digital Projector - User's Guide - Page 75
Mercury Safety WARNING: This digital projector lamp contains a small amount of mercury. If the lamp breaks, adequately ventilate the area where the breakage occurred, discard any nearby food and drink, and thoroughly clean the table surface around the projector. Wash your hands after cleaning the
HP vp6300 Series
Digital Projector
User’s Guide