HP W2408 HP L2445m LCD Monitor - User Guide - Page 12
Connecting the Cables - support
UPC - 808736978651
View all HP W2408 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect a VGA signal cable or DVI-D signal cable. NOTE: The monitor has both VGA and DVI-D connectors and is capable of supporting either analog or digital input. The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the +/Input button on the front panel or through the On-Screen Display (OSD) feature by pressing the Menu button. ● For analog operation, use the VGA signal cable provided. Connect the VGA signal cable to the VGA connector on the rear of the monitor and the other end to the VGA connector on the computer. ● For digital operation, use a DVI-D signal cable (not provided). Connect the DVI-D signal cable to the DVI connector on the rear of the monitor and the other end to the DVI connector on the computer. Figure 3-3 Connecting the Signal Cable 3. Connect the built-in monitor speakers to the computer using the audio cable provided. 6 Chapter 3 Setting Up the Monitor ENWW