HP Xw4550 HP Workstations - LSI SAS 3041E Serial Attached SCSI RAID - Page 3
Download and install updates, Accessing the internal components of the workstation, Removing - bios
UPC - 883585505951
View all HP Xw4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Step 1-Preparing for component installation NOTE: Workstation models vary. All illustrations are examples only. Download and install updates 1. Check for available system BIOS updates specified for your HP workstation model and operating system at http://www.hp.com/go/workstationsupport. 2. Install the system BIOS updates, if available. Accessing the internal components of the workstation 1. If you need help preparing the workstation for this installation, consult the removal and replacement procedures in the service guide for your workstation at http://www.hp.com/support/ workstation_manuals. NOTE: For the HP Workstation series, these procedures are also available in the User Guide on the Documentation and Diagnostics CD that shipped with your workstation. 2. Power down the workstation, and then disconnect the power cord. 3. Power down all external devices, and then disconnect them from the workstation. 4. Remove the side access panel. Removing components 1. If present, remove the card support to enable access to the expansion slots and system board connectors. 2. Select an unused PCI Express (PCIe) x4, x8, or x16 expansion slot on the system board. NOTE: To identify an available PCIe expansion slot, see the service label on the side access panel. Figure 1 Removing the expansion slot cover ENWW Step 1-Preparing for component installation 3