HP Xw4600 HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle
HP Xw4600 - Workstation - 2 GB RAM Manual
UPC - 883585516483
View all HP Xw4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Xw4600 manual content summary:
- HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 1
(long) ● CD with software drivers and manufacturer's documentation ● Hard drive activity LED cable ● Installation instructions (this document) ● Warranty information Before you begin To view QuickSpecs and determine the compatibility of this product with your HP workstation, see http://www.hp.com/go - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 2
risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, health, and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located at http://www.hp.com/ergo and on the documentation CD (if - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 3
the system BIOS updates, if available. Accessing the internal components of the workstation 1. If you need help preparing the workstation for this installation, consult the removal and replacement procedures in the service guide for your workstation at http://www.hp.com/support/ workstation_manuals - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 4
selected PCIe expansion slot on the system board. Ensure that the card is fully seated in the expansion slot. 2. Close the expansion slot retention clamp to secure the card in the slot. Figure 2 Installing the SAS RAID controller card 4 LSI MegaRAID® SAS 8888ELP Host Bus Adapter installation ENWW - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 5
guide HP workstation model Location of hard drive HP xw Workstations HP 400 Workstations Internal hard drive bay HP xw Workstations HP 400 Workstations Optical bay HP 600 Workstations HP 800 Workstations Internal hard drive bay HP 600 Workstations HP 800 Workstations Optical bay HP - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 6
labelled J9) Card BIOS default settings: ● Newer cards are auto-sensing by default. ● * Historically, card BIOS default enabled connectors A (ports 0-3) and D (ports 4-7). ● See Step 6-Configuring RAID devices on page 12 for information about setting and resetting card BIOS defaults. 6 LSI - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 7
adapter cable. • The short MiniSAS 4i-4X SATA cable is used only to connect SAS hard drives located in the internal hard drive bays of HP Workstations. • A long MiniSASi data cable is used to connect SAS hard drives located in the optical drive bays. See Standard data cable connections on page - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 8
-BAY-0 cable to port 0 (P0) on the MiniSAS internal adapter cable. b. Match the subsequent HDD-BAY cables to the corresponding port on the MiniSAS internal second data cable supplied with the controller card kit to Internal connector 2 on the controller card, and continue with Standard data cable - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 9
a SAS-to-SATA interconnect cable adapter (supplied with the HP workstation SAS hard drive kit) to the data connector on the SAS hard drive. Figure 7 Attaching the SAS-SATA adapter 2. Select the long 4-port data cable that best fits the workstation. Avoid sharp bends in the data cables. ● To choose - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 10
the hard drive product documentation. Figure 8 Data cable connections 4. If connecting more than four hard drives, attach the second data cable supplied with the controller card kit to Internal connector 2 on the controller card. 10 LSI MegaRAID® SAS 8888ELP Host Bus Adapter installation ENWW - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 11
HP xw Workstations, if connecting small form factor hard drives: a. Connect the first four hard drives to the long 4-Port complete installation instructions, see the the SAS RAID controller card . 2. Attach the service label inside the workstation access panel. Use the LED cable appropriate for the - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 12
data connectors are enabled. For card setup instructions, see the manufacturer's documentation included in this kit. For detailed instruction on configuring RAID devices, see the service guide for the HP workstation model at http://www.hp.com/support/workstation_manuals. Additional information is - HP Xw4600 | HP xw and Z Series Workstations - LSI 8888 8-port SAS RAID Controlle - Page 13
日本語 This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then select your workstation product and select Japanese from the drop down Manual Language menu. http://www.hp.com/support/workstation_manuals Manual Language Japanese ENWW Japanese 日本語 13
LSI MegaRAID® SAS 8888ELP Host Bus
Adapter installation
Introduction
This document describes how to install the LSI MegaRAID® SAS 8888ELP Host Bus Adapter (HBA) in
HP
and xw series Workstations. Procedures are included for connecting SAS hard drives mounted
in hard drive bays and optical drive bays to the Redundant Array of Independent Drives (RAID) controller
card.
Kit contents
●
SAS RAID controller card
●
MiniSAS 4i to 4X SATA internal adapter cable (short)
●
4-Port data cable with 90-degree connectors (long)
●
4-Port data cable with straight connectors (long)
●
CD with software drivers and manufacturer's documentation
●
Hard drive activity LED cable
●
Installation instructions (this document)
●
Warranty information
Before you begin
To view
QuickSpecs
and determine the compatibility of this product with your HP workstation, see
go/productbulletin
.
© 2007–2009 Hewlett-Packard Development Company, L.P. MegaRAID is a registered
trademark of LSI Corporation. Printed in the U.S.
ENWW
Introduction
1