HP Xw8200 LSI 20320A-R PCI: Ultra 320 SCSI to PCI-X Host Adapters Users Guide - Page 18
Ultra320 SCSI Host Adapter Characteristics
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Caution: You must touch a grounded metal surface before handling the host adapter because static charges on your body can damage electronic components. Handle plug-in boards by the edge; do not touch board components or gold connector contacts. LSI Logic recommends that you use a static ground strap. Step 4. Remove your Ultra320 SCSI host adapter from its packaging and verify that it is not damaged. Figure 2.1 shows the LSI22320 host adapter. The LSI20320 and LSI21320 Ultra320 SCSI host adapters are different in design and size. Refer to Chapter 3, "Ultra320 SCSI Host Adapter Characteristics," for more details. Figure 2.1 Hardware Connections for the Host Adapter Channel B 68-Pin Internal High Density SCSI Interface J4 Connector Channel A 68-Pin Internal High Density SCSI Interface J6 Connector Channel A & B Busy LED Connector J5 Channel B 68-Pin External VHDCI SCSI J3 Connector Channel A 68-Pin External VHDCI SCSI J2 Connector J1 Connector PCI-X Bus to Mainboard Step 5. Find an unused PCI-X or PCI slot. Note: You can insert a 64-bit host adapter into a 32-bit slot if no 64-bit slots are available. However, if you do this, the data transmission rate is limited to standard PCI speed. 2-2 Detailed Host Adapter Installation Version 2.1 Copyright © 2002-2003 by LSI Logic Corporation. All rights reserved.