HP dv2z HP Pavilion dv2 Entertainment PC - Maintenance and Service Guide - Page 82
Power connector cable
UPC - 883685982478
View all HP dv2z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Power connector cable NOTE: The power connector cable is available in the Cable Kit, spare part number 501891-001. Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the following components: a. Hard drive (see Hard drive on page 40). b. Memory module (see Memory module on page 43) c. WWAN module (see WWAN module on page 45) d. WLAN module (see WLAN module on page 47) e. Keyboard (see Keyboard on page 50). f. Top cover (see Top cover on page 53) g. Fan (see Fan on page 55) h. System board (see System board on page 59) Remove the power connector cable: 1. Remove the power connector (1) from the clip built into the base enclosure. 74 Chapter 4 Removal and replacement procedures