HP dx2358 Service Reference Guide: HP Compaq dx2355 MT/dx2358 MT Business PCs, - Page 44

If you are, replacing the old expansion card with a new expansion card, install an

Get HP dx2358 - Microtower PC PDF manuals and user guides View all HP dx2358 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Removal and Replacement Procedures- Microtower (MT) Chassis 7. Hold the card just above the expansion slot on the system board then move the card toward the rear of the chassis so that the bottom of the bracket on the card slides into the small slot on the chassis. Gently press the card straight down into the expansion slot on the system board. ✎ Be sure not to scrape other components in the chassis when installing an expansion card. Installing an Expansion Card 8. Fix the screw to secure the expansion card in place. 9. If you are not replacing the old expansion card with a new expansion card, install an expansion slot cover to close the open slot. Insert the metal slot cover in the open slot, then push the expansion slot latch down to secure the slot cover in place. Ä CAUTION: After removing an expansion card, you must replace it with a new card or cover the open slot (for example, with a metal slot cover or a piece of duct tape) for proper cooling of internal components during operation.) Service Reference Guide 489243-001 6-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Service Reference Guide
489243-001
6–9
Removal and Replacement Procedures— Microtower (MT) Chassis
7. Hold the card just above the expansion slot on the system board then move the card toward
the rear of the chassis so that the bottom of the bracket on the card slides into the small slot
on the chassis. Gently press the card straight down into the expansion slot on the system
board.
✎
Be sure not to scrape other components in the chassis when installing an expansion card.
Installing an Expansion Card
8. Fix the screw to secure the expansion card in place.
9. If you are
not
replacing the old expansion card with a new expansion card, install an
expansion slot cover to close the open slot. Insert the metal slot cover in the open slot, then
push the expansion slot latch down to secure the slot cover in place.
Ä
CAUTION:
After removing an expansion card, you must replace it with a new card or cover the open
slot (for example, with a metal slot cover or a piece of duct tape) for proper cooling of internal
components during operation.)