HP dx2420 Computer Setup (F10) Utility Guide - Page 10

Table 2 Computer Setup-Advanced (continued) PS/2 Mouse Allows you to set: ● Disabled ● Enabled ● Auto Detect USB Legacy Mode Support Allows you to set: ● Disabled ● Enabled Onboard LAN Allows you to disable/enable onboard LAN controller. Onboard LAN Boot ROM Allows you to disable/enable the boot ROM of the onboard LAN chip. SATA1 Controller Allows you to disable/enable the SATA1 Controller. SATA1 Controller Mode If SATA1 Controller is enabled, allows you to set the mode to: ● IDE ● AHCI SATA2 Controller Allows you to disable/enable the SATA2 Controller. Onboard Audio Allows you to set the onboard audio to: ● Auto ● Disabled ● Enabled Internal Speaker Allows you to set the internal speaker to: ● Disabled ● Enabled Supervisor Password Allows you to change supervisor password. User Password Allows you to change the user password. Computer Setup-Power NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 3 Computer Setup-Power Option Description After AC Power Failure Allows you to select system restart behavior after power loss: ● Stay Off ● Power On ● Auto XD Disables/enables XD bit. 4 Computer Setup (F10) Utility ENWW