HP dx6120 Troubleshooting Guide - Page 72
Storage > DPS Self-test, Code/Message, Probable Cause, Recommended Action, Drive Detects
View all HP dx6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
POST Error Messages Numeric Codes and Text Messages (Continued) Code/Message Probable Cause Recommended Action 1720-SMART Hard Drive Detects Imminent Failure Hard drive is about to fail. (Some hard drives have a hard drive firmware patch that will fix an erroneous error message.) 1. Determine if hard drive is giving correct error message. Enter Computer Setup and run the Drive Protection System test under Storage > DPS Self-test. 2. Apply hard drive firmware patch if applicable. (Available at www.hp.com/support.) 3. Back up contents and replace hard drive. 1785-Multibay incorrectly installed (for Multibay option/ non-USDT systems) 1. Multibay option ribbon cables not seated or improperly attached. 2. Multibay device not properly seated. 3. Multibay diskette present. 1. Ensure the Multibay option is attached as device 0 on the IDE cable. 2. Ensure no other device is attached to the same IDE cable. 3. Ensure both ends of the IDE and Multibay ribbon cables are properly seated. 4. Ensure the Multibay device is fully inserted. 5. Ensure a Multibay diskette is not present (Multibay diskette drives are not supported by the Multibay option). (for integrated Multibay/ USDT systems) 1. Multibay device not properly seated. 2. Multibay riser not properly seated. 1. Ensure the Multibay device is fully inserted. 2. Ensure the Multibay riser is properly seated. A-10 www.hp.com Troubleshooting Guide