HP nx6315 Drives - Page 14
Removing an optical disc (with power)
View all HP nx6315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Optical drives Removing an optical disc (with power) If the computer is running on external or battery power: 1. Turn on the computer. 2. Press the release button 1 on the drive bezel to release the media tray, and then pull out the tray 2. 3. Remove the disc 3 from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. ✎ If the tray is not fully accessible, tilt the disc carefully as you remove it. 4. Close the media tray and place the disc in a protective case. 4-4 Drives
4–4
Drives
Optical drives
Removing an optical disc (with power)
If the computer is running on external or battery power:
1. Turn on the computer.
2. Press the release button
1
on the drive bezel to release the
media tray, and then pull out the tray
2
.
3. Remove the disc
3
from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. Hold the
disc by the edges and avoid touching the flat surfaces.
✎
If the tray is not fully accessible, tilt the disc carefully as you
remove it.
4. Close the media tray and place the disc in a protective case.