HP t5300 Terminal Emulation User's Guide (CE .NET) - Page 30

Getting Started Serial Connection Settings The Serial Configuration dialog box can be displayed from the Connection Wizard Host Information dialog box by setting the Connection Type to Serial then clicking the Advanced button, or the New Connection dialog box when in nonWBT mode by selecting Serial in the Type list box then clicking the Configure button. Baud Rate Factory default: 9600 This specifies the transmit and receive baud rates for the port selected for host communications. Parity Factory default: None This option specifies the parity mode for each transmitted character. If the number of Data Bits is 8, set this option to None. Selecting Odd will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up to an even number, and 0 if the previous 7 bits add up to an odd number. Selecting Even will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up to an odd number, and 0 if the previous 7 bits add up to an even number. Mark parity will set every eighth bit to 1 and Space parity every bit to 0. Flow Control Factory default: Input This option specifies the type of flow control used by the line port to communicate readiness to transmit or receive data from the host. None Input Output - No flow control - XON/XOFF on received data - XON/XOFF on transmitted data 2-20