Hitachi CMP4201U Owners Guide - Page 32

PRODUCT SPECIFICATIONS (continued) Recommended Signal List (continued) With Composite/S-video Input(VIDEO1 input). This function can only be used when the optional video unit has been inserted. No. Signal Name NTSC 1 NTSC-4.43 M-PAL PAL60 PAL 2 N-PAL SECAM Signal mode Resolution Vertical frequency (Hz) Horizontal frequency (kHz) 525 59.94 15.73 625 50.00 15.63 Dot clock frequency (MHz) ʵ ʵ Remarks With R, G, B Video input (VIDEO1 and VIDEO2 input). This function can only be used when the optional video unit has been inserted. No. Signal Name 1 SCART Signal mode Resolution Vertical frequency (Hz) NTSC PAL 59.94 50.00 Horizontal frequency (kHz) 15.734 15.625 Dot clock frequency (MHz) ʵ Remarks &VSPQFBO
4UBOEBSE With component input (VIDEO2 input) This function can only be used when the optional video unit has been inserted. No. Signal Name 1 480/60i 2 576/50i 3 576/50p 4 480/60p 5 720/60p 6 1080/50i 7 1080/60i 8 1035/60i Signal mode Resolution Vertical frequency (Hz) 480 59.94 576 50.00 576 50.00 480 59.94 720 59.94 1080 50.00 1080 60.00 1035 60.00 Horizontal frequency (kHz) 15.73 15.63 31.26 31.47 44.96 28.13 33.75 33.75 Dot clock frequency (MHz) Remarks • The type of video board or connecting cable used may not allow for correct displays adjustment of H.POSITION, V.POSITION, CLOCK and PHASE. • The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it. • The monitor differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and vertical sync signal polarities. Note that different signals having all these elements alike may be handled as the same signal. • Displaying images with more than 512 lines of vertical resolution at Full diplay (compressed display) can result in the interpolation of stripes.