Hitachi CMP4212U Owners Guide - Page 12
Remote control, COMPONENT NAMES continued
View all Hitachi CMP4212U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
COMPONENT NAMES (continued) Remote control POWER OFF button POWER ON button MUTE button RGB/VIDEO buttons PinP button AUTO button MENU button OK button ID button VOL RGB 1 RGB 2 MUTE VOL AV1 AV2 AV3 AV4 AUTO PinP SIZE RECALL MENU OK ID ID SET POWER ON/OFF button VOLUME UP/DOWN buttons SIZE button RECALL button RETURN button SELECT/ADJUST buttons ID SET button Loading Batteries 1. Open the battery cover. • Slide back and remove the battery cover in the direction of the arrow. Handling the Remote Control Use the remote control within about 5 m from front of the unit's remote-control sensor and within 30 degrees on both sides. 2. Load batteries. • Load two Size AA batteries included observing the correct polarities. 3. Close the battery cover. • Replace the battery cover in the direction of the arrow and snap it back into place. With in 30 degrees About 3m With in 30 degrees About 3m About 5m VOL RGB 1 RGB 2 MUTE VOL AV1 AV2 AV3 AV4 AUTO PinP SIZE RECALL MENU OK ID ID SET CAUTION • Do not use new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains. • When loading batteries, observe their correct polarities as marked on the product. If loaded in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, or stains. ATTENTION • Do not drop or impact the remote control. • Do not splash the remote control with water or put it on a wet object to avoid possible failures. • Before leaving the remote control out of use for an extended period of time, remove the batteries from it. • If the remote control begins to lack responsiveness, replace the batteries. • Strong light such as direct sunlight impinging on the photoreceptor of the remote control can cause operational failure. Position this unit to avoid direct contact with such light.