Hitachi CPS240 Technical Operating Manual

Hitachi CPS240 - SVGA LCD Projector Manual

Hitachi CPS240 manual content summary:

  • Hitachi CPS240 | Technical Operating Manual - Page 1
    Projector CP-S240/CP-X250 User's Manual - Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency sure to check jack type, signal level, timing and resolution before connecting this projector to a computer. • Some computers may have multiple display screen modes. Use
  • Hitachi CPS240 | Technical Operating Manual - Page 2
    Example of computer signal Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Display interval (C) Data H.
  • Hitachi CPS240 | Technical Operating Manual - Page 3
    Connection to the ports Connection to the ports AUDIO IN2 Y R CB/PB L CR/PR VIDEO S-VIDEO CONTROL AUDIO OUT AUDIO IN1 A B RGB IN1 RGB IN2 RGB OUT USB K RGB IN OUT switch When this switch is not pushed in, RGB IN2 is selected. When this switch is pushed in, RGB OUT is selected. A RGB
  • Hitachi CPS240 | Technical Operating Manual - Page 4
    Connection to the ports CY AUDIO IN2 R D CB/PB L E CR/PR VIDEO S-VIDEO CONTROL AUDIO OUT AUDIO IN1 G F RGB IN1 RGB IN2 RGB OUT USB K COMPONENT VIDEO C Y, D CB/PB, E CR/PR RCA jack x3 • System: 525i(480i), 525p(480p), 625i(576i), 750p(720p), 1125i(1080i) Port Signal Y Component video
  • Hitachi CPS240 | Technical Operating Manual - Page 5
    Connection to the ports AUDIO IN2 YIR J CB/PB L CR/PR VIDEO S-VIDEO K M HCONTROL AUDIO OUT AUDIO IN1 RGB IN1 RGB IN2 RGB OUT L USB K H AUDIO 1-IN (Ø3.5 stereo mini jack), I J AUDIO 2 L/R (RCA jack) • 200mVrms(max.) 35kΩ termination K AUDIO OUT (Ø3.5 stereo mini jack) • 200mVrms(max.) 1kΩ
  • Hitachi CPS240 | Technical Operating Manual - Page 6
    TD (4) DTR (5) GND (6) DSR (7) RTS (8) DTS (9) RI RS-232C port of the computer Connecting the cable 1. Turn off the projector and the computer. 2. Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable (cross). Use the cable that fulfills the specification
  • Hitachi CPS240 | Technical Operating Manual - Page 7
    projector. (2) The projector returns the response code '1DH'+ data (2 bytes) to the computer. Changing the projector the projector the projector cannot execute the received command. When the projector cannot data length code, the projector ignore the excess data when the projector receives an undefined
  • Hitachi CPS240 | Technical Operating Manual - Page 8
    EF 03 (Example return) 00 00 (Normal) 04 00 (Temp error) 08 00 (Filter error) 06 00 06 00 06 00 2A D3 BA D2 19 D3 01 00 01 Fan error) 05 00 06 00 (Air flow error) (Lamp time error) 09 00 10 00 (Filter missing error)(Inner Sencer error) 03 00 (Lamp error) 07 00 (Cool error) BE EF 03 06 00
  • Hitachi CPS240 | Technical Operating Manual - Page 9
    RS-232C Communication (continued) Names Operation Type User Gamma Pattern Set User Gamma Point 1 User Gamma Point 2 User Gamma Point 3 User Gamma Point 4 User Gamma Point 5 User Gamma Point 6 User Gamma Point 7 User Gamma Point 8 COLOR TEMP Set COLOR TEMP GAIN R Off 9 step gray scale 15 steps
  • Hitachi CPS240 | Technical Operating Manual - Page 10
    RS-232C Communication (continued) Names Operation Type COLOR TEMP GAIN G COLOR TEMP GAIN B COLOR TEMP OFFSET R COLOR TEMP OFFSET G COLOR TEMP OFFSET B COLOR COLOR Reset TINT TINT Reset SHARPNESS SHARPNESS Reset PROGRESSIVE Set MY MEMORY Load Set MY MEMORY Save Set Get Increment Decrement Get
  • Hitachi CPS240 | Technical Operating Manual - Page 11
    Names Operation Type ASPECT Set OVER SCAN OVER SCAN Reset V POSITION V POSITION Reset H POSITION H POSITION Reset H PHASE H SIZE H SIZE Reset AUTO ADJUST COLOR SPACE Set COMPONENT Set VIDEO FORMAT Set FRAME LOCK Set 4:3 16:9 SMALL NORMAL Get Get Increment Decrement Execute Get Increment
  • Hitachi CPS240 | Technical Operating Manual - Page 12
    RS-232C Communication (continued) Names Operation Type KEYSTONE V KEYSTONE V Reset WHISPER Set MIRROR Set VOLUME AUDIO - RGB1 Set AUDIO - RGB2 Set AUDIO - Video Set AUDIO - S-Video Set AUDIO - Component Set Get Increment Decrement Execute NORMAL WHISPER Get NORMAL H:INVERT V:INVERT H&V:
  • Hitachi CPS240 | Technical Operating Manual - Page 13
    Names MUTE LANGUAGE Operation Type Set TURN OFF TURN ON Get Set ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO NORSK NEDERLANDS PORTUGUÊS MENU POSITION H MENU POSITION H Reset MENU POSITION V MENU POSITION V Reset SVENSKA PУCCKИЙ SUOMI POLSKI TÜRKÇE Get Get Increment Decrement Execute Get
  • Hitachi CPS240 | Technical Operating Manual - Page 14
    OSD BRIGHT. BLANK Set BLANK On/Off Set START UP Set My Screen LOCK Set Message Set AUTO SEARCH Set AUTO POWER OFF LAMP TIME LAMP TIME Reset FILTER TIME FILER TIME Reset MAGNIFY FREEZE Set Get Increment Decrement My Screen ORIGINAL BLUE WHITE BLACK Get TURN OFF TURN ON Get My Screen
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

1
Projector
CP-S240/CP-X250
User's Manual – Operating Guide
Technical
Example of computer signal
Resolution (H x V)
H. frequency (kHz)
V. frequency (Hz)
Rating
Signal mode
720 x 400
37.9
85.0
VESA
TEXT
640 x 480
31.5
59.9
VESA
VGA (60Hz)
640 x 480
37.9
72.8
VESA
VGA (72Hz)
640 x 480
37.5
75.0
VESA
VGA (75Hz)
640 x 480
43.3
85.0
VESA
VGA (85Hz)
800 x 600
35.2
56.3
VESA
SVGA (56Hz)
800 x 600
37.9
60.3
VESA
SVGA (60Hz)
800 x 600
48.1
72.2
VESA
SVGA (72Hz)
800 x 600
46.9
75.0
VESA
SVGA (75Hz)
800 x 600
53.7
85.1
VESA
SVGA (85Hz)
832 x 624
49.7
74.5
Mac 16” mode
1024 x 768
48.4
60.0
VESA
XGA (60Hz)
1024 x 768
56.5
70.1
VESA
XGA (70Hz)
1024 x 768
60.0
75.0
VESA
XGA (75Hz)
1024 x 768
68.7
85.0
VESA
XGA (85Hz)
1152 x 864
67.5
75.0
VESA
SXGA (75Hz)
1280 x 960
60.0
60.0
VESA
SXGA (60Hz)
1280 x 1024
64.0
60.0
VESA
SXGA (60Hz)
1280 x 1024
80.0
75.0
VESA
SXGA (75Hz)
1280 x 1024
91.1
85.0
VESA
SXGA (85Hz)
1600 x 1200
75.0
60.0
VESA
UXGA (60Hz)
NOTE
• Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a computer.
• Some computers may have multiple display screen modes. Use of some of
these modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(1600x1200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• Automatically adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.