Hitachi CPX201 User Manual - Page 18

Operating Using the automatic adjustment feature 1. Press AUTO button on the remote control. Pressing this button performs the following. AUTO button  F or a computer signal The vertical position, the horizontal position and the horizontal phase will be automatically adjusted. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME ON UP 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 may still be incorrectly adjusted. Use a bright picture when adjusting. POSITION MENU ENTER  F or a video signal and s-video signal ESC RESET The video format best suited for the respective input signal will be selected automatically. This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu (31). The vertical position and horizontal position will be automatically set to the default.  For a component video signal The vertical position, horizontal position and horizontal phase will be automatically set to the default. ● The automatic adjustment operation requires approx. 10 seconds. Also please note that it may not function correctly with some input. When this function is performed for a video signal, a certain extra such as a line may appear outside a picture. ● The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (43). MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK Adjusting the position 1. Press POSITION button on the remote control when no menu is indicated. The "POSITION" indication will appear on the screen. MAGNIFY FREEZE PAGE VOLUME ON UP 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 POSITION MENU 2. Use the cursor buttons to adjust the picture position. ENTER When you want to reset the operation, press RESET button on ESC RESET the remote control during the operation. To complete this operation, press POSITION button again. Even if you do not do anything, the dialog will automatically POSITION button disappear after a few seconds. ● W hen this function is performed on a video signal, s-video signal or component video signal, some image such as an extra-line may appear at outside of the picture. ● If POSITION button is pressed when a menu is indicated on screen, the displayed picture does not move its position but the menu does. 18