Hitachi CPX2510 User Manual - Page 36

AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. Item VOLUME SPEAKER AUDIO SOURCE Description Using the ▲/▼ buttons adjusts the volume. High  Low Using the ▲/▼ buttons turns on/off the built-in speaker. ON  OFF When OFF is selected, the built-in speaker does not work. The combination of a picture and audio input port can be arranged in the menu. The audio coming into the port selected in the (2) is output while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using the ▲/▼ buttons. COMPUTER IN1  COMPUTER IN2  AUDIO OUT STANDBY  COMPONENT VIDEO  S-VIDEO  (Y, Cb/Pb, Cr/Pr) • Choose AUDIO OUT STANDBY, to select the audio output to the AUDIO OUT ports in the standby mode. The built-in speaker does not work in the standby mode. • While QUIT is selected, pressing the ◄ button returns to the previous menu. (2) Select one of the AUDIO IN ports using ◄/► buttons. AUDIO IN1  AUDIO IN2  AUDIO IN3  • disables the audio output. • C.C. (Closed Caption) is automatically activated when is selected and an input signal containing C.C. is received. This function is available only when the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPONENT, COMPUTER IN1 or COMPUTER IN2, and when AUTO is selected for DISPLAY in the C.C. menu under the SCREEN menu (41). 36