Hitachi CPX2510 Technical Manual - Page 3
Connection to the ports - data projector
UPC - 050585151680
View all Hitachi CPX2510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. C B A A COMPUTER IN1, B COMPUTER IN2, C MONITOR OUT D-sub 15pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. signal: TTL level (positive/negative) • Composite sync. signal: TTL level Pin Signal 1 Video Red 2 Video Green 3 Video Blue 4 (No connection) 5 Ground Pin 9 (No connection) Signal 10 Ground 11 (No connection) 12 A : SDA (DDC data) / B , C : (No connection) 13 H. sync / Composite sync. 6 Ground Red 7 Ground Green 8 Ground Blue 14 V. sync. 15 A : SCL (DDC clock) / B , C : (No connection) 3
3
A
COMPUTER IN1,
B
COMPUTER IN2,
C
MONITOR OUT
D-sub 15pin mini shrink jack
• Video signal: RGB separate, Analog, 0.7Vp-p,
75
Ω
terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level
Pin
Signal
Pin
Signal
1
Video Red
9
(No connection)
2
Video Green
10
Ground
3
Video Blue
11
(No connection)
4
(No connection)
12
A
: SDA (DDC data) /
B
,
C
: (No connection)
5
Ground
13
H. sync / Composite sync.
6
Ground Red
14
V. sync.
7
Ground Green
15
A
: SCL (DDC clock) /
B
,
C
: (No connection)
8
Ground Blue
Connection to the ports
Connection to the ports
B
A
C
NOTICE
►
Use the cables with straight plugs, not L-shaped ones, as
the
input ports of the projector are recessed.